Red RC » P Off Road

July 31, 2018

Traxxas Unlimited Desert Racer Pro-Scale LED light kit

Coming from Traxxas and made for the Unlimited Desert Racer is the Pro-Scale High Intensity LED light kit. The included Traxxas High Voltage Amplifier packs the muscle to efficiently power the 204 individual LEDs in the kit while minimising losses from excessive current and heat. The tightly regulated output provides stable lighting performance, without flickering or dimming as the battery voltage changes. In another Traxxas first, the smart brake lights work when brakes are applied in both forward and reverse directions. This eliminates the common problem with generic aftermarket systems that turn on the brake lights while reversing. The kit includes dual straight LED bumper-mounted LED light bars, a curved roof light bar, multifunction red and amber brake light/class light bar, a high-voltage 8-channel power amplifier for intense, brilliant LED lighting, and a regulated output for stable lighting performance with no flickering or dimming as the battery voltage changes. Rather than draw valuable power away from the BEC, the power amplifier uses the Power Port on the VXL-6s ESC to tap power directly from the batteries. The power amplifier transforms and regulates battery current to for reliable high-power performance. Three different lighting modes on the amplifier let owners control which lights illuminate. The Traxxas Link App helps to further customise the lighting modes to the required specifications or to turn the lights on and off directly in the app. The kit includes all mounting hardware to make installation a breeze. The LED Light Bar Kit comes as a complete set or as individual components allowing Desert Racer owners to select the exact setup to meet their needs.

View more images here

July 31, 2018

PSM B6.1 series front shock towers

PSM from Germany have introduced their new carbon fibre shock towers for the Team Associated B6.1 series of 2WD buggies. Available in two variants for the B6.1 and B6.1D, both shock stays offer a refined suspension geometry and +1mm forward shock alignment for improved performance on the specific surfaces. The weight-optimised shock towers sport a reinforced design for optimised durability and low weight and they are cut from high-quality 5mm carbon fibre.

View the B6.1D specific shock tower here

July 31, 2018

Israeli Nitro Buggy Championship Rd8 – Report

The 1/8th Nitro Buggy season in Israel has come to an end with the recent round 8 of the championship. Held at the Negev Speed Racing track it was a super hot affair with temperatures reaching up to 34 degrees Celsius. After the four qualifying rounds Yaniv Sivan took the TQ honours and he also got the hole shot at the start of the A-main. Yaniv was closely followed by Aviv Maymon in 2nd and when Sivan made a small mistake it promoted Maymon into the lead. What followed was a forth and back for several times until Aviv suffered a flameout which cost him a position that was taken by Or Balulu who in turn also suffered engine issues. This promoted Tal Siles to 2nd and Dvir Hirak to 3rd. From there the top 3 positions remains the same until the checkered flag. As Ofir Avitan had checked out in the championship the race for the runner-up spot was on between Tal Siles and Yaniv Sivan. Going into the final round Yaniv had a 2-points lead and with the 2nd place finish at round 8 he cemented the vice-championship from Tal Siles 3rd.

View the top 5 results here

July 31, 2018

Yokomo release new YZ-4 & YD-2 optionals

Coming from Yokomo are new option parts for the YZ-4 buggy, YD-2 drift car and the Racing Performer motor series. First up are aluminium 8 degrees C-hubs for the YZ-4 4WD buggy. Offering a lower caster angle than stock the hubs increased steering response and tuning capabilities on dirt surfaces. The parts are machined from high-quality aluminium and they come black anodised and with machined silver edge details. Also new is a ceramic ball bearing set for the YD-2 series of drift cars. It includes six 1050 and two 1150 gearbox bearings that will greatly reduce natural friction for improved throttle response and top speed. Last but not least is a precision bearing set for the M3, M4 and D1 Racing Performer motor series. Included are a front and a rear bearing whose high precision will ensure a more efficient performance for better acceleration, top speed and durability.

View the other new parts here

July 31, 2018

Serpent Spyder SDX4 Evo 1/10th 4WD buggy kit

Serpent have introduced the Spyder SDX4 Evo 1/10th scale 4WD buggy kit. Based on the EFRA European Championship winning platform the Evo variant offers a refined design to ensure the buggy is ready to take all sorts of surfaces and track conditions. Motor, battery and speed controller can be mounted in a variety of locations, ensuring wide control over the buggy’s weight bias. The buggy builds on an aluminium main chassis and offers several features to fine-tune the chassis flex, such as a rear carbon fibre chassis stiffener. The 4WD shaft-drive train is equipped with quick-release differential cases, an aluminium motor mount and centre bulkhead as well as a carbon fibre upper diff plate. Alloy suspension brackets, 10° C-hubs, and 0° rear uprights ensure high durability while alloy shock absorbers with 3.2mm shock shafts, X-rings and moulded pistons soak up even harsh terrain. Other features include carbon fibre shock towers and servo mount, gear differentials, and new-style and material ball joins. The kit is rounded out by a sleek body shell and it will hit stores very soon.

View a list of the features and more images here

July 31, 2018

Team Associated introduce new 6.1 series optionals

Team Associated have introduced two new option parts for their 6.1 series vehicles such as the B6.1, T6.1 and SC6.1. First up is the Factory Team titanium top shaft screw for all 6.1 series buggies and trucks. The top shaft screw replaces the stock steel version and it reduces the rotating weight and comes with preinstalled pin for easy assembly. The item is compatible with layback, laydown, and standup gearboxes when using the slipper clutch and it weighs 40 percent less than the stock steel screw.

Continue reading here

July 31, 2018

Pro-Line 2019 Chevy Silverado Z71 Trail Boss body shell

Available now from Pro-Line is the 2019 Chevy Silverado Z71 Trail Boss True Scale body shell for popular 1/10th short course trucks. The just released full-size 2019 Chevy Silverado is extremely popular and has a distinct look and Pro-Line has included all the aggressive scale detail into the body and sticker sheet for a highly detailed True Scale replica. It is usable for trucks such as the Traxxas Slash 2WD, Slash 4×4 and Team Associated SC10 series and it comes clear, including window masks and a detailed decal sheet.

View more images here

July 31, 2018

Samix TRX-4 rear aluminium chassis brace

Samix have introduced their new rear aluminium chassis brace for the Traxxas TRX-4 trail truck. The item is machined from high-quality alloy material and designed to reinforce the rear end of the truck as it is much stronger compared to the kit’s plastic brace. The part is available in three different colours, features machined silver edge details and an etched Samix logo.

View another image here