Red RC

September 22, 2020

Mon-Tech Racing polycarbonate cockpit kits

New items from Mon-Tech Racing who have released these clear polycarbonate cockpits for a variety of car types. The kit includes the 0.75mm polycarbonate moulded cockpit, one or two helmets with visor and fixing screws, dashboard decal and seat belts and notes for the co-driver. Cockpit A (above) is for crawler and scalers, or vehicles with small cabin such as PickUp ‘T’, cockpit B is for Rally/Touring car, GT or vehicles with large cabin such as RS GT3 and finally cockpit C for crawler, scaler, rally or vehicles with medium cockpit such as Mont-Rock.

View the other cockpits here

September 22, 2020

Max Gotzl is double 2020 Czech National Champion

The 3rd and 4th round of 2020 1/8 Czech Nationals took a place last weekend at the home track of Max Gotzl in Horni Jeleni. The nice weather forecast promised a good racing weekend, which it was. On the 3rd round on Saturday Gotzl was able to set the overall TQ with Ebuggy straight after Q1 and Q2, Ales Bidovsky lined up 2nd and Mirek Koutek 3rd on the A main grid. With Nitro Martin Bayer took Q1, but Max managed to win Q2 and Q3 to take the overall TQ in Nitro as well. In the finals Xray driver Gotzl was able to win all three A mains in Ebuggy with at least one lap gap over 2nd placed Ales and Martin Milowsky who took the last step on the podium overall.

Continue reading the report here

September 22, 2020

Awesomatix A12 1/12th scale chassis

Having previously shown you prototype photos of Awesomatix’ radical new A12 1/12th scale chassis, today the Russian company have released final details & photos of their soon to be available car. The first thing you notice about the A12 is simply how low it sits. A low centre of gravity is a critical element in racing performance for any class, and this is further exemplified by the A12 pan car on an entirely new level. Much like the Awesomatix A800MMX touring car, the A12 far surpasses all existing 12th scales by providing a much lower centre of gravity.

View more details & images of the A12 here

September 22, 2020

OfficinaRC tungsten copper M3 screws

OfficinaRC’s new series of tungsten copper screws are designed for those looking to bring the weight distribution and centre of gravity of their car to the next level. These countersunk head screws come in three sizes, 3x5mm, 3x6mm and 3x8mm, and enable you to add a large amount of weight at any point in the car in the lowest possible point under the chassis. Sold in packs of 4, due to the nature of the material they require care not to damage the head when fastening them.

View the different size screws here

September 22, 2020

T-Works TC-01 suspension mount adjustment spacers

T-Works continue to give the Tamiya TC-01 plenty of attention, today releasing this set of suspension mount adjustment spacers. Also suitable for the M07 chassis, they feature a U-shaped design meaning that you only need to slightly loosen the suspension mount screw to insert or remove the spacer. Sold as a pack of 8 pieces.

Source: T-Works [rc-tworks.com]

September 22, 2020

Mon-Tech Racing tease new GT shell

Mon-Tech Racing from Italy have released a first teaser image of an upcoming new body shell release. No official information is available yet, but the focal point shown in the photo is the rear window louvers/engine grill from a GT body shell perhaps. We bring you more details on the project as we get them.

Source: Mon-Tech [mon-techracing.net]

September 22, 2020

VP-Pro Gripz Evo 1/10th SC tire

Having recently released the Gripz Evo tire for 1/8th buggy, VP-Pro have now brought this thread pattern to Short Course. The mini square pin tyre works on nearly every track surface, from damp or muddy loam to dry and dusty hard-packed blue groove. The light weight tyre excels especially in qualifying when speed and agility is the main target with the small and evenly spaced lugs allowing to cut through dust, clean out in wet conditions, and skim over bumps and ruts without causing traction rolling like larger pin tyres. The tyre is available in M2, M3 & M4 rubber compounds and come pre mounted on black, white or yellow rims.

Source: VP-Pro [vp-racing.com]

September 21, 2020

Reedy electronic power switch

Reedy’s new electronic power switch is a reliable and versatile alternative for 1:8 racers fed up with failure-prone mechanical switches. The LiPo mode option prevents over-discharging your receiver battery, while on-board LEDs serve as a battery capacity indicator displaying real-time state of charge. The lightweight and compact design mounts with double-sided tape or use the included transponder mounting bracket, depending on your desired configuration.

Source: Reedy [associatedelectrics.com]