Red RC

March 21, 2025

Awesomatix A800FXR 1:10 FWD Touring Car

Awesomatix has unveiled their latest FWD touring car with the new A800FXR featuring an innovative two-piece, bi-material chassis plate. With the A800R platform reaching its maturity, the A800FXR builds on the proven A800R touring car concept – shortened chassis plate for minimal overhang and chassis rub and improved damping characteristics over the FX Evo platform – while retaining the successful drivetrain and steering geometry of its predecessor. It also benefits from more than two years of extensive development of its touring car counterpart. The standout feature of the A800FXR kit is its two-piece, bi-material chassis plate. The forward section, made of aluminium, supports the front end, transmission, and electronics, while a carbon fibre rear section holds the rear assembly. While offering improved weight distribution and refined flex characteristics it brings unparalleled tunability as it allows four different wheelbase settings, truly redefining the phrase “the best of both worlds”.

Continuing reading and view more images here

March 21, 2025

McBride finally delivers in Q3 in New Zealand

Kyle McBride finally delivered on the speed he has shown all day at Round 1 of the Asian Buggy Championships in New Zealand by closing out the first day of qualifying with a TQ run in Q3. Opening Friday’s action with a P2 and then a P3 in Q2, mistakes dropping him of the top of the timing screens in both, the former pro racer again didn’t have a clean run however on the third time of asking he had the pace to snatch back the TQ on the final lap. Behind the Aussie, the WIRC of Kiwi Kasey Dawson would also end the day with his best nitro run for a result that makes him one of four remaining contenders for the overall TQ going into Saturday’s fourth & final qualifier. An impressive drive by Mayako’s Dylan Toia saw him complete the Top 3 ahead of Q1 winner Jayden Jamieson. Having taken Q2, Jayden Edmunds was unable to back that up after he made a tyre change that resulted in his Mayako having too much grip and he was only P7 for the round. In eBuggy, HB Racing’s Logan Toia backed up his Q2 performance to claim another TQ run and only Q1 winner Dawson can deny him the overall TQ but in order to do so he needs to top Q4 in the fastest time of the weekend.

Continue reading here

March 21, 2025

Mikimodel MS1.0 1.5mm Steel Chassis

Another new Yokomo specific release from Italy’s Mikimodel is their new 1.5mm steel chassis for the MS1.0 Electric Touring and which is compatibility with previous models such as the BD12/BD11/BD10. The steel chassis is intended for use on asphalt but can also be used in indoor conditions on carpet. During testing they worked hard to find the right weight and above all the correct flex of the chassis which was not easy finding the right compromise to unload the chassis and work on the torsion points. Only after many tests did they also managed to find the right material and the right treatment for the chassis. Using the steel chassis, Mikimodel say they have found an extremely balanced combination, giving the possibility of extremely easy driving in different conditions.

View more images here

March 21, 2025

Edmunds takes Q2 at Asian Buggy Champs

Mayako Youth Mentoring Program driver Jayden Edmunds has TQ’d the second round of qualifying at the Asian Buggy Championships in New Zealand, a switch of tyre completely elevating the Australian’s performance after he opened with a P8 in Q1. While a slower track, no one making 10-laps as they did in Q1, the second of the four qualifiers would prove a super close battle with the Top 3 covered by 6/10ths of a second. Once again it was Kyle McBride who had the fastest car around the Counties RC Car Club track but again it was a mistake that denied last year’s podium finisher from registering a TQ run he certainly has the speed for. Having taken the opening qualifier, Sworkz’s Jayden Jamieson backed that up with a strong P2 0.492 off Edmunds and a 0.099 ahead of McBride. In eBuggy, HB Racing’s Logan Toia went one better than Q1 to TQ the second round as WIRC’s Q1 winner Kasey Dawson ended up overheating his tyres dropping him back to P4. Tekno’s Caleb Noble would be second fastest in eBuggy with McBride completing the Top 3.

Continue reading here

March 21, 2025

R1 Wurks Aluminium Motor Spacer

New from R1 Wurks are these Aluminium Motor Spacers intended for oval racing. Available in 3, 4 and 5mm options, they are designed to shift the motor’s mass to the left (inward), increasing the left-side weight percentage, this adjustment enhances handling and makes it a valuable tuning aid for oval racing. They are available in multiple thicknesses for fine-tuning. They can also be used universally in non-oval applications where redistributing motor mass enhances side-to-side weight balance. Made from high-quality 7075 T6 aluminium, these spacers are lightweight yet durable. Their excellent heat transfer properties help dissipate heat efficiently through the motor plate, ensuring optimal cooling performance. Specifically in terms of Oval racing performance benefits the spacers improve cornering stability in that it balances the car when entering turns, increasing left-side tire traction. It also reduced right rear drive by shifting weight away from the right rear, aiding rotation and improving corner exit transitions. In general performance benefits you get more predictable handling, balancing side-to-side weight allowing for smoother and more precise driver inputs.

View additional image here

March 21, 2025

Jamieson from McBride in opening Asian Buggy C/ships qualifier

Sworkz’s Jayden Jamieson has taken the first qualifier at the season opener of the Asian Buggy Championships, a last lap bobble costing Kyle McBride a TQ run at the New Zealand event. Opening the first of the four rounds of qualifying strong to set the early pace, a mistake on lap 3 cost around him 3-seconds and he dropped to 4th but laying down the fastest lap of the run he hauled himself back to the top of the timing screens to go back ahead of Jamieson. As the only two drivers to go 10-laps, as McBride came around for his final run down the straight his Team Associated got crossed up, enough for the Aussie to eventually cross the loop 7/10ths of a second in deficit to his Kiwi rival. Behind Top Seed Caleb Noble salvaged a Top 3, the Tekno driver’s set-up not ideal for today’s warmer midday conditions. In eBuggy, Top Seed Kasey Dawson carried his pace through from yesterday with his WIRC registering the first TQ run ahead of brothers Logan and Dylan Toia.

Continue reading here

March 20, 2025

Speedzone Evolution 1S and 2S Shorty Lipo Packs

Speedzone has released two new lipo packs under its Evolution Competition Series range in the form of a 8400mAh 3.7V 200C pack and a 5500mAh 7.4V 200C shorty pack. Both have 5mm bullet connectors with the 8400mah pack measuring 93x47x18.5mm and weighing 162g while the 5500mAh shorty pack measures 96x47x25mm and weighs 224g. The packs have the best internal resistance and average voltage numbers that Speedzone has ever offered in the category line up, along with the best holding time above 4v and 8v respectively. Both battery packs are ROAR approved.

Source: Speedzone [speedzoneusa.com]

March 20, 2025

Hudy Carbon 1:10 Electric TC Tyre Stand

Hudy has released this Carbon Fibre Tyre Stand for 1:10 Electric Touring Car. The highly functional stand keeps your pit space tidy and makes it easy to track your various tire sets. Produced from premium CNC-machined USA made carbon fibre, it comes with a Hudy hard case bag for convenient transportation and safe storage. Finished with Hudy graphics, the stand includes four aluminium stands and four aluminium wheel nuts for quick and secure tire attachment. The set accommodates up to four 1:10 electric TC tire sets.

VCiew additional image here