Red RC

April 28, 2020

Kyosho Le Mans 480T brushless motor

Kyosho is in full vintage swing these days, announcing not only their forthcoming Fantom EP-4WD vintage 1/12th scale 4WD pan car kit but also a nice brushless motor to go along with it. The 21.5T Le Mans 480T motor takes design cues of the original “8-minute racing” Le Mans 480T but it utilises modern day brushless technology for greatly increased power, reliability and of course it does away with the need to cut the commutator and replace the brushes. The power plant also features a 2mm longer motor shaft for easier pinion gear fitment with the unique Fantom EP-4WD drivetrain and it comes as 480T with a green label and green anodised end bells, but it includes parts to convert it into a blue-toned 480S, using a new sticker and blue end bells.

View converted Le Mans 480T here

April 28, 2020

BMT 801GT Pro updated 2-speed clutch bell

BMT from Italy have introduce their updated aluminium 2-speed clutch bell for the 801GT Pro 1/8th scale GT kit. The clutch bell was designed to allow for the use of bigger pinion gears, namely 18T to 20T first gear and 23T to 25T second gear pinions, allowing for a greater transmission setup window. The clutch bell is made of high-quality aluminium and it comes with a hard surface finish for wear and looks.

View another image here

April 28, 2020

VRP D819 carbon fibre fuel tank heat shield

VRP have done up a carbon fibre fuel tank guard for the HB Racing D819 buggy. The guard will keep the pipe from ever burning into the fuel tank as well as keeping the tank from absorbing excess heat from the engine’s exhaust pipe. Easily bolts right onto the upper two screw holes on the side of the tank. The guard is cut from 1mm carbon fibre in house at VRP in Houston, Texas.

Source: VPR [visionracingproducts.com]

April 28, 2020

Kyosho reveal full Fantom EP-4WD details

Following a series of high-quality images Kyosho have fully unveiled their forthcoming Fantom EP-4WD 1/12th scale electric on-road re-release kit. The original car made its debut early in 1983 and it pretty much blew the competition at the 5th JMRCA 1/12 Electric Racing Car Japan Nationals, held at a purpose-built track in Nakayama. The 1/12th scale class was a melting pot of different designs back in the day and the Fantom spearheaded them all with its balanced FRP chassis layout and chain-driven 4WD drivetrain with front one-way bearing. Fast forward to today, the 2020 model not only recreates the look and feel of the original, but also maintains the superior cornering speed and stability, even on low grip surfaces, with its part-time 4WD and front one way. As with all Kyosho Vintage Series models, each key component is consistent with the original design but has been improved to handle the latest power sources and deliver the Fantom’s distinctive sharp handling and control on modern RC tracks.

Continue reading here

April 28, 2020

Kyosho KRF nitro on-road clutch adjustment wrench

Coming soon from Kyosho is their new KRF clutch spring adjustment wrench for 1/8th and 1/10th scale nitro kits. Machined from aluminium the tool is lightweight and easy to use while its compact dimensions ensure minimal interferences with the clutch’s surroundings, such as receiver boxes. The clutch spring wrench is usable with common centrifugal-axial IC track clutch systems such as the one found on Kyosho’s own R4 1/10th 200mm nitro kit series.

Source: Kyosho [kyosho.com]

April 28, 2020

T-Works D8 series diaphragm shock cap set

T-Works have introduced their new aluminium diaphragm shock cap set for the HB Racing D8 series of vehicles. The caps are machined from high-quality 7075-T6 aluminium and they come hard-coated for surface protection. Included in the set come two different design rubber volume compensators that help to adjust the shock absorber’s rebound under compression. Also included are four shock cap bushings that help to protect the caps and shock mounts. The set is usable with the D819, D817 and D815 nitro kits as well as the respective electric-powered variants.

Source: T-Works [rc-tworks.com]

April 28, 2020

Tamiya SW-01 Mud Mad 1/24th scale stunt truck

Tamiya have announced the soon release of their new Mad Mud 1/24th scale 4WD stunt truck. Using the same SW-01 chassis as the Comical Wheelie Lunch Box, the truck is a fun little vehicle ideal to kill some time inside or in the backyard. It features a gear-driven drivetrain, standard 1/10th scale wheels and it is only 190mm wide and 160mm wide. Powered by a 370-size motor the truck can pull wheelies with not problem while the specially designed suspension, that manipulates body roll, ensures a tight cornering radius. The Mud Mad is decked off by a cool looking truck body shell with black wheels and knobby tyres adding to the overall looks.

View another image here

April 27, 2020

Xtreme Aerodynamics 1/8th on-road body stiffeners

Xtreme Aerodynamics have introduced new carbon fibre stiffeners for their range of 1/8th scale on-road body shells. Moulded from high-quality carbon fibre material the stiffeners sit inside the body shell, ensuring greater stability and durability compared to polycarbonate stiffeners and thus improving overall aerodynamic performance. The stiffeners are understood to fit all of Xtreme Aerodynamic’s 1/8th on-road bodies and they will become available soon.

Source: Xtreme Aerodynamics [xtremeaerodynamics.it]