Red RC

June 22, 2020

MST FXX 2.0 S carbon fibre steering arm set

Coming from MST and made for the FXX 2.0 S drift car is a carbon fibre steering arm set. The kit includes machined carbon fibre arms, a ball-raced carbon fibre steering plate, a carbon fibre steering lever, as well as red anodised bellcrank hubs all of which make for a more precise and better performing steering setup, comparable to the KMW version kit. In addition the updated steering geometry allows for increased steering throw which further adds to the overall performance.

Source: MST [rc-mst.com]

June 22, 2020

RC-Cox T4’20 high & low flex aluminium chassis

PPM RC Racing have released the new RC-Cox high and low flex aluminium main chassis plates for the Xray T4 2020 mid-motor touring car. Machined from high-quality 7075-T6 aluminium the chassis offer a different outer shape compared to Xray’s original design, resulting in different overall flex characteristics. Available in a highly machined high flex and solid design low flex variant, the chassis allow to adapt the car to various medium to very high bite track conditions.

View the low flex chassis here

June 22, 2020

Frederik Brolos Mikkelsen wins at Danish On-road Nats

Round 2 of the Danish Electric On-road Nationals was hosted by the Glostrup Racing Club this past weekend. Actually the season opener, after round 1 had to be cancelled due to the Corona virus pandemic, it was Awesomatix driver, Frederik Brolos Mikkelsen with the overall TQ in the Touring Super Stock class following a clean sweep in the qualifiers. The triple A-mains again saw Frederik excel as he was able to bring home the wins in all three legs to take the overall victory from the Xray duo of Kevin Nielsen in 2nd and Patrick Folman in 3rd.

Continue reading here

June 22, 2020

Maifield doubles at Pro-Line Summer Offroad Shootout

The 23rd annual Pro-Line Summer Offroad Shootout was held at Rainman’s Hobby and Raceway in Bakersfield, California this past weekend. The race attracted 160 entries and in 2WD Open Buggy it was Yokomo’s Ryan Maifield with the overall TQ from Ron Devoll in 2nd. The triple A-mains saw Ryan making a clean sweep in A1 and A2 for the overall, allowing him to sit out A3 that was won by Team Associated’ Broc Champlin who took the overall runner-up spot from Team Associated’s Ron Devoll in 3rd. Ryan Cavalieri would come in 4th overall, tie on points with Ron.

Continue reading here

June 20, 2020

T-Works RGT8 carbon fibre radio tray support mount

T-Works have introduced a carbon fibre radio tray support mount for the HB Racing RGT8 1/8th scale on-road GT kit. The set includes two machined carbon fibre braces that support the standard radio tray for improved stability and optimised overall chassis stiffness.

Source: T-Works [rc-tworks.com]

June 20, 2020

RC Carbon Cavalieri S35-4E carbon fan support

MW RC Cars from Austria have introduced the new RC Carbon Cavalieri carbon fibre fan support for the SWorkz S35-4E buggy. The part is machined from high-quality materials, it was developed for the use with 40mm fan units and attaches to the centre bulkhead assembly with the fan being placed over the motor for improved heat dissipation.

View another image here

June 19, 2020

Mon-Tech Racing 190mm Pick-Up body shell

Mon-Tech Racing from Italy have unveiled their all-new Pick-Up body shell for 190mm wide 1/10th scale touring cars. The lid’s design is inspired by 1950’s hot rod pick-ups and although it was developed basically for bashing, it still offers a good overall balance thanks to the add-on rear wing that also makes for race-inspired looks. Beside the 190mm touring car variant Mon-Tech will also offer a 210mm wheelbase M-chassis and a crawler trail truck body in the foreseeable future.

View more images here

June 19, 2020

WRC Racing NTX.3 3mm aluminium chassis

Coming from WRC Racing and made for the NTX.3 1/10th scale 200mm nitro on-road kit is a 3mm aluminium main chassis. The part is machined from high-quality Swiss 7075-T6 aluminium and it comes clear anodised for surface protection. Using the chassis will increase steering, traction and stability in high-bite track conditions.

Source: WRC Racing [wrc-racing.com]