Red RC

March 21, 2024

Pro-Line Convict 2.0 1:8 Buggy Tyre

US tyre manufacturer Pro-Line has released a new updated 2.0 version of its Convict 1:8 Buggy race tyre. A lightweight and more versatile version of the popular world-championship-winning Fugitive, the Convict features strategically placed small connecting bars that improve the stability of the tyre tread, which is especially important when used in softer compounds. Now, the proven Convict pattern is available as the Convict 2.0, constructed on Pro-Line’s latest generation carcass profile that utilises a single arc to create the sidewall geometry, then transitions from the sidewall to the crown with a larger radius resulting in a rounder and less edgy appearance. This carcass provides a tailored fit to the wheel and insert package, making mounting a breeze. The Convict 2.0 is available in four popular compounds, M3 & M4 for watered tracks, S3 & S5 long wear for more abrasive dry tracks, and includes our latest generation closed cell foam insert.

Source: Pro-Line [prolineracing.com]

March 21, 2024

Xray XB2 Alu Steering Arm & Plate

Xray has released new authentic option parts for it Xray XB2 & XT2 2WD Offroad platforms in the form of an Aluminium Steering Arm & Plate for use the 1-Piece Chassis. Made from Swiss 7075 T6 Aluminium, the steering system improves precision and steering feel. There is also increased clearance around the system for easier maintenance & set-up adjustments.

View more images here

March 20, 2024

Infinity IF15-2 Nitro Touring Car option parts

Creation Model has release more new optional parts for its Infinity IF15-2 1:10 Nitro Onroad chassis. The optional parts include Carbon Front wheel plates with its pptimised shape to accommodate the updated thickness of hard front knuckle plate adopted on IF15-2. Additionally, reducing the clearance of the opening compared to the original product to efficiently control the airflow, which is the original purpose of the knuckle plate. Also new is the carbon front stock stay which is lowered for mounting short shock to IF15-2. As with the standard type, the damper mounting angle can be selected from 4 locations. Due to the lowered tower, the damper is 4mm shorter, offering a lower centre of gravity. It is possible to enhance steering response and tune setup to your preferred driving feel. A new Parallel 50mm Rear Universal Joint facilitates adjustment to reduce vehicle width when using wide offset tires. Finally, they have also released Type-B aluminium wheel hex hubs. These oversized wheel hubsbetter fit tires with large wheel hex mounting preventing misalignment and increasing wheel stability.

View other parts here

March 20, 2024

Genius ‘NEXTGEN’ 1:8 GT Differential

New from Italian chassis kit manufacturer Genius is their ‘NEXTGEN’ Diff intended for 1:8 GT racing. Boasting a range of enhanced features, these improvements include reduced wear & tear and an overall smoother operation for increased durability. Addressing the wear issues of plastic differential casings, the ‘NEXTGEN’ diff gets an Ergal differential casing. With a more aggressive aesthetics and enhanced precision, internally the satellite cross is supported with steel pins and for convenience the diff comes Pre-assembled.

View diff internals here

March 20, 2024

ARC A10-25 1:10 Onroad Electric Touring Car

ARC has unveiled their latest 1:10 Electric Touring Car with the release of the new A10-25. When the A10-23 was launched in 2023, detailed changes were made to boost its performance over the A10. Striving to further improve the A10 platform, ARC has been busy testing and developing new parts over the past 16 months to further increase performance and have incorporated all these learnings to deliver the new A10-25. Despite looking similar to the A10-23, the key improvements on the new A10-25 are design changes to suspension geometry, lower arms, top & bottom bulkheads and motor mount. The main chassis is made from 2.25mm high quality carbon fibre plate, the ship shape chassis provides well balanced handling at all kind of outdoor tracks. The new car gets completely new lower arms, the new ones all 2mm longer compare with A10-23, and the shock mounting position also move 3mm closer to centre. The sum of these design changes maximises corner speed of the A10-25 over a wider range of conditions while significantly increasing drivability.

Continue reading & view more images here

March 20, 2024

Klinik RC F8 rear hub plates

US racing upgrade parts producer Klinik RC has released new +1.5mm and +3mm taller rear hub plates for the Sparko F8 1:8 Buggy platform. Used at last weekend’s 25th Anniversary Dirt Nitro Challenge Ryan & Mark Pavidis, Ryan Cavalieri and Tony Newland, the carbon fibre plates Gain rear grip and consistency by raising the rear roll centre. The plates feature notches for easy identification between the 1.5mm and 3mm option which come as four pieces per size.

Source: Klinik RC [klinikrc.com]

March 19, 2024

Kurzbuch secures RCXX backing

With limited sponsorship opportunities in 1:8 Onroad these days, former World Champion & current factory Mugen Seiki driver Simon Kurzbuch has secured backing for his programme from Swiss based online RC retailer RCXX. Top Qualifier at last November’s World Championship in Japan on his debut with Mugen Seiki, finish 3rd in the 10hour final, the Swiss driver will receive support for his 2024 campaign from RCXX.Shop who on the news said, ‘We’re thrilled to announce our increased investment and expansion in pro sportsman sponsorship for the year 2024. It is with great pride we share that Simon Kurzbuch, a former World Champion and a renowned figure in RC racing, is now partnering with RCXX in Switzerland. As his third-party sponsor, we’re committed to supporting Simon throughout the 2024 racing season. He will be participating in multiple championships and races, in close cooperation with our brand. This collaboration is not just a partnership; it’s a statement of excellence and ambition. We are truly excited to see what we can achieve together and are looking forward to a year of triumphs and achievements. Welcome aboard, Simon!’

Source: RCXX.Shop [rcxx.shop]

March 19, 2024

Genius 1:8 GT Fury Body

Top Qualifiers at the 2023 IFMAR 1:8 GT World Championship in Australian with Alex D’angelo, Italian 1:8 GT and Large Scale chassis manufacturer Genius has introduced its first GT bodyshell with the release of the GT Fury. Based on the Pagani Zonda, it boasts a 1mm thickness and wheelbase ranging from 310mm to 340mm, with a ready-to-race weight of 255 grams. EFRA homologated, the GT Fury project was born out of the necessity for particularly aggressive aerodynamic performance on the front end, a crucial characteristic for GT8 models. This enhancement allows for increased performance in cornering, elevating the overall performance of the model.

View more images here