Red RC

April 27, 2020

Yokomo BD10 RTC system & more optionals

Yokomo have announced the release of new optional parts for the BD10 touring car in the form of the RTC rear toe control system as well as several weight options. Starting with the RTC system, the kit allows to convert the rear suspension into a reactive toe change design that will improve stability or agility by changing the rear tyre toe using chassis roll in corners. By adjusting the height of the inner toe link different settings can be accessed in order to improve rear stability or agility with the system being a hot ticket when running outdoors. The kit includes updated rear arms, weight-optimised steering knuckles and C-hubs as well as lightweight mounting hardware.

Continue reading here

April 27, 2020

Tamiya TC-01 Formula E Gen2 4WD kit

Following a couple of teasers on social media during the recent week, Tamiya have fully unveiled their all new 190mm TC-01 shaft-driven 4WD on-road chassis that comes decked off with a fantastic looking Formula E Gen2 body shell. Starting with the chassis, the all-new TC-01 platform utilises an inboard shock absorber design to ensure an ultra-low centre of gravity while the centralised weight distribution with a mid motor and rear-mounted battery pack promises exceptional performance on the track. The suspension geometry with camber, caster, and toe angles is widely adjustable using shims, allowing to access complex setups while the standard 12mm hex touring car rims enable the driver to use a near endless range of rim and tyre combinations. The drivetrain is equipped with an oil-filled gear differential and while the kit comes with a multi-part Formula E Gen2 body shell, the chassis is also usable with standard 190mm touring car body shells. The kit will hit stores in August.

View more images here

April 27, 2020

Tamiya TA07RR 4WD electric touring car kit

Coming soon from Tamiya is their new TA07RR 4WD electric touring car kit. Of a mid-motor design the RR version of Tamiya’s popular intermediate-level tourer comes including a host of option parts such as carbon fibre upper decks, an aluminium servo and middle deck mount, carbon reinforced bulkheads, adjustable aluminium arm mounts, the TRF419 Upgrade Set suspension parts, TRF 37T front pulley and rear gear differential, TRF420 front axles, double joint driveshafts, TRF Super Short shock absorbers including the TRF-SSBB shock upgrade set, TA07 aluminium steering arms and many more. Also included is a set of anti-roll bar wires specially developed for the use with Tamiya Challenge Cup tyres. Full details will become available in time of the release with a definite date not being set yet.

View a list of the included option parts here (translated from Japanese)

April 26, 2020

T-Works MBX8T 4mm carbon fibre shock towers

T-Works have introduced their new 4mm carbon fibre shock towers for the Mugen MBX8T 1/8th scale truggy. The towers are direct replacements for the stock parts and feature multiple upper shock mounting locations as well as a multitude of rear upper camber link mounting positions. Also included are several rear wing mount positions that allow to sift the rear wing up and down. The shock towers are available as a complete set for separately for the front and rear of the truck.

Source: T-Works [rc-tworks.com]

April 26, 2020

Serpent Cobra SRX8-T nitro truck kit

Following a first teaser image Serpent have fully unveiled their all-new Cobra SRX8-T nitro truck kit. Based off of the SRX8 buggy and compared to its predecessor S811T, the truck variant features a new 3mm 7075-T6 aluminium chassis with matching side pods. The main plate features bent edges to increase strength in the centre of the chassis to prevent bending. The chassis has a tapered angle shape and increased width to improve stability as well as drivability. The SRX8-T also utilises the exclusive fixed engine/gear mesh found exclusively on the SRX line of vehicles. The solid mounting of the engine and diff is absolutely fool proof and owners can still adjust the gear ratio without the need to fiddle around with engine positions. With the choice of 13 and 14 tooth clutch bells, as well as 46, 47, and 48 tooth spur gears give maximum adjustability for every condition.

Continue reading here

April 24, 2020

1up Pro Shop aluminium standoffs

1up Racing have introduced their new 1up Pro Shop aluminium standoffs in 5mm to 25mm sizes. Machined from high-quality aluminium and featuring a 5.5mm outer hex and M3 threads, the standoffs come in handy in a variety of applications, such as pan car front suspension spacing. They are available in 5mm, 10mm, 15mm, 20mm, and 25mm sizes and in champagne, sky blue, red, silver, black and dark blue anodising to fit pretty much every colour flavour.

View the other available sizes here

April 24, 2020

Traxxas heavy duty rubber pit mat

Traxxas’ new heavy duty pit mat is the perfect addition to any RC workbench, on the track or at home. The chemical-resistant, heavy-gauge rubber construction takes a pounding to help protect the work surface from damage. The generous 914x508mm size is large enough to accommodate most Traxxas – or any other – vehicles, with specially designed compartments to organise parts and tools.

View more images here

April 24, 2020

Samix SCX10 III brass 5.8mm suspension balls

Following the release of stainless steel 5.8mm upper suspension balls for the Axial SCX10 III Samix have also introduced a brass variant. Machined from high-quality material and sporting a shiny finish, the pivot balls offer great durability and strength while adding a bit of weight. They come in sets of four and are usable for all Axial SCX10 vehicles, the Yeti, AX-10, Wraith and Scorpion.

View another image here