Red RC » Hobby-Off

July 10, 2015

Team Orion dDrive 2-in-1 brushless power unit

Team Orion have introduced their all-new dDrive 2-in-1 brushless power unit for 1/10th scale on-road and off-road vehicles. The revolutionary system combines a highly efficient and very powerful 4-pole brushless motor and a brushless controller in one simple to use package. Coming from the mind of Oscar Jansen the unit is used in place for the usual motor and is very easy to setup while the integrated system uses only a minimal amount of wires for improved reliability and less hassle especially for beginners. The integrated controller offers three different drive modes, user-adjustable performance settings, overheat protection and low-voltage cut-off while the 4-pole motor is housed in an aluminium heatsink can. The 58mm long unit is splash-proof, it comes pre-wired with a T-type connector and it is available as 2700kv and 3000kv variant.

Click here to view the features, video and more photos

July 10, 2015

Tamiya TT-02B MS buggy kit

Coming soon from Tamiya is the TT-02B MS 1/10th scale 4WD kit. Based off of the entry level TT-02 chassis the buggy also received the MS treatment with FRP shock towers, aluminium centre driveshaft, front and rear metal cup joints, rear aluminium hubs and white CVA shock absorbers. Other features include adjustable camber and steering links, fluorescent orange rims and a special bodyshell and rear wing.

Click here to view more photos

July 7, 2015

Castle Creations Mamba Monster X brushless ESC

Castle Creations have announced their new Mamba Monster X brushless speed controller for 1/8th scale buggies and trucks, 1/10th scale monster trucks and generally all vehicles of up to 6.8kg of weight. The 2S to 6S controller is usable with sensored and sensorless motors and it features an adjustable high-voltage BEC system capable of delivering 5.5V to 8.0V output and an additional auxiliary wire that allows to adjust parameters such as torque control and maximum throttle using the auxiliary channel on compatible transmitters. Data logging and Futaba T4PX-compatible telemetry features round out the package. The waterproof ESC with a footprint of 53x49mm weighs in at 111g and it will become available separately or as combo package including the Castle Creations 1515 2200kv or 1512 2650kv brushless motor.

Click here to view the features and another photo

July 7, 2015

Samix SCX10 titanium link sets

Samix have two new titanium link sets for the Axial SCX10 truck available. Coming as 8-piece and 10-piece long wheelbase high-clearance lower link sets and also as a 2-piece steering link package, with the latter being also included in the 10-piece set, all parts are machined from high-quality titanium material, they feature holes for easy assembly and etched Samix logos. The links are designed for the use with #5347 Traxxas rod ends for extra stability and precision and they not only improve ground clearance but also looks and durability.

Click here to view more photos

July 2, 2015

Losi LST XXL-2 1/8th brushless monster truck

Horizon Hobby have introduced the LST XXL-2 1/8th scale electric brushless monster truck. Sitting on a highly durable 2.5mm aluminium chassis the truck packs ferocious features into a sturdy build that can hold up to abuse and unforgiving driving conditions. Equipped with a 6S compatible Dynamite speed controller and AVC technology the vehicle targets experienced drivers and beginners alike. A 2200kv brushless motor makes for speeds of over 90km/h while the sturdy 4WD drivetrain with sealed gear differentials can take lots of abuse. Included with the factory-built vehicle comes a genuine Spektrum DX2E 2.4GHz radio system and a newly design bodyshell along a set of multi-surface tyres.

Click here to view the features and more photos

June 30, 2015

JConcepts Scorpios 2.2″ crawler tyre

JConcepts Scorpios 2.2" crawler tyre

JConcepts have unveiled the new Scorpios 2.2″ all-terrain crawling and rock racing tyre. Ideal for vehicles like the Axial Yeti, the Scorpios scale looking tread, extra tall 152mm size and profile, jump out as the most obvious features. The padded arrangement of tread makes the tyre ideal for transitioning from the hard road to dirt and then into rocky and uneven terrain. Once power is applied to the vehicle, the tread spacing opens up which allows for some deep digging making it a great working tire in dirt and muddy conditions. The flexibility of the compound combined with the close arrangement gives the tyre a grippy feel but still maintains that all important look. The large overall height provides plenty of ground clearance for an abundance of terrain and internal grid ribbing help maintain its upright structure during hard loads and on power bursts. The tyres include a soft open cell foam insert capable of standing up the super soft compound but flexible enough for sharp terrain.

Source: JConcepts [jconcepts.net]

June 30, 2015

Samix SCX10 high clearance knuckle arm set

Samix have a new option part for Axial’s SCX10 off-road chassis available in the form of the high clearance knuckle arm set. CNC-machined from high-quality aluminium and coming anodised in black, green, silver and gun metal colour the parts not only improve the durability but they also allow for higher steering angles and greater adjustability as the steering plate offers three different steering link positions to adjust the Ackermann effect. The knuckles can be used with the standard steering links and the bearing seat comes additionally machined after anodising for improved precision. Also included is a POM bearing adapter, again to add precision and durability with its design allowing to extract the ball bearings by using a standard wheel axle.

Click here to view more photos

June 29, 2015

JConcepts Ruptures 2.2″ crawler tyres

JConcepts Ruptures 2.2" crawler tyres

New from JConcepts comes the Ruptures 2.2″ crawler tyre for vehicles such as the Axial Yeti. The extremely tacky yet versatile tyre offers a layout of individual “large islands” that react to directional and forward loading characteristics like a soft gummy candy. The long horizontal attack bars are connected with solid sidewall detail which braces the sidewall for the high impact situations. The centre “mini islands” help maintain spinning speed and at half height provide some space to sling clean during those dirtier runs. The entire top level of tread has built-in cuts and recesses which provide a sharp edge. A sidewall radial rib connected with a dual position arrow help maintain stability and help the driver squeak out of a tough situation. The carcass itself is extremely pliable which conforms to the vast majority of obstacles. Inside the carcass, the tyre features a connected “Y” loop ribbing design which blends carefully into the sidewall. The bracing supports the lower half of the tire while maintaining the upper flex characteristics. The 154mm tall tyres include a soft open cell foam insert capable of standing up the super soft compound but flexible enough for sharp terrain.

Source: JConcepts [jconcepts.net]