Infinity has released new lightweight quick change levers for its World Championship winning IF18-3 1:8 Onroad chassis. By removing material from the levers, the SP Quick Change Lever weight has been reduced by 0.3grams for the front and 0.5grams for the rear level. Removing this unnecessary material has also improved rotational balance. Reduced clearance in the thrust direction helps maintain wheel stability during running.
New from 175RC are these titanium front axles for the Team Associated RC10B7 1:10 2WD Buggy. Ultralight and mega strong the titanium axles are a direct replacement for the standard kit axles. The Utah based company offers the axles in natural finish or in Dark Blue to match your factory look.
Source: 175RC [175rc.com]
Arena RC Racing has released a new multiflex front upper deck option for the new MS1.0 1:10 electric Touring Car from Yokomo. The 2.omm upper deck offers increased flex for desired set-up and can be easily cut to more flex. They also offer 2.0mm front and rear decks which in terms of hardness and the use of high-quality carbon fibre material make the frame more rigid and increase the durability.
The first round of the 2024 Brazilian Nitro Onroad Nationals was held in Florianópolis, SC, Brazil, recently. Despite delays caused by heavy rains in the area which decreased practice times for all participants, the finals happened on Sunday under much desired sunny weather. With record attendance for such an event after an ongoing economic downturn and some long term effects of the pandemic on the closure of many tracks and shops, the event was a success, with 46 registered drivers including two from Argentina as well. The event was divided in four categories; 1:8 GT, 1:8 Onroad and 1:10 Touring Car, the latter divided in two grids of Sport and Racer. Sport designated for rookies while the Racer category was for seasoned drivers.
Debuting at last September’s 1:10 Offroad World Championships in Arizona, JConcepts has now updated its S15 body for the latest 1:10 2WD buggy from Team Associated, the RC10B7. Available in both standard and a lightweight option, the body ships with window mask, decal sheet and two of the latest Carpet | Turf | Dirt wings for a quick transition from preparation to racing. The S15 follows the chassis shape like a glove and the tidy arrangement is free of unwanted gaps. The center line roof fin helps the body stand up to rigorous demands of crashes and off-track excursions and while on the track, provides straight line tracking ability. The top of the side pod rolls into the rear end section helping with the force placed just in front of the rear tires. Just behind the cab, there is a trim-able section dedicated to rear escape of hot air and inner shell build up.
New from from RC Carbon Cavalieri is this innovative combination height and camber gauge. The in-house developed setup tool especially for 1:8 Buggy and Truggy is very user-friendly, dimensionally accurate and innovative. Camber adjustment is easier than ever thanks to the centered ball-bearing pivot point, the camber indicator levels itself automatically by pressing lightly on the wheel. The displayed level can be “locked” during both camber and height adjustment to ensure easy alignment. The tool is also ideal for reading the values on both sides. The tool takes a camber of -6° to +6° which is easy and accurate to read in 1° increments. The height can be taken from 5mm to 42mm. The increments of the height scale are 1mm. The ergonomic design also offers optimum handling.
Xray has created a Horizontal Body Post Mounting Gauge for their X4F 1:10 FWD Electric Touring Car. It is design to help to mark the horizontal rear body mounts position on the body shell for a perfect fit on the car. Featuring two special scales you can check and adjust the proper position of the body. The first scale is used to adjust the rear part of the body and the second scale is used to check the body height around the car. Fits all popular body shells.
California’s Exotek Racing has released new machined steering spindles & caster blocks for the Losi 22S series of 1:10 cars. Made from 7075 alloy, the factory style parts have a polished black and silver finish with heavy duty construction for smooth and precise steering operation.
