March 6, 2025

Neo Vintage Racing Yokomo to Kyosho Wheel Adapters

Neo Vintage Racing has released these two Yokomo Wheel Adapters for Kyosho offroad models.  First up is Ultima Front Set which is precision-machined to cater to vintage Kyosho 2WD models enabling the use Yokomo front rims, including deep-dish options from JC Racing Products and original Yokomo front rims.  Compatible with a range of classic Kyosho models like the Ultima, Triumph, Scorpion, Tomahawk, Beetle, and many others boasting 4mm front wheel axles, these 7075 aluminium wheel adapters are the ideal choice for those seeking to upgrade their vintage Kyosho models for modern racing with 2.2-inch Yokomo wheels.  These include the sought-after JC Racing Products Yokomo replica rims, available in both narrow and standard front rims, as well as rear rims featuring a deep-dish design. Choose from a variety of colors, including white, yellow, pink, and black.  The adapters offer the flexibility to maintain either the standard total width or reduce it by 2mm per side, simply by flipping the adapter 180 degrees.  In addition to modern Yokomo 2.2-inch rims, you can also utilize original Yokomo deep-dish rims in 2.2-inch size, as well as smaller variants such as 2.0, 1.9, or 1.7 inch rims, preserving the authentic vintage aesthetic.  This feature is especially valuable for broader models like the Kyosho Triumph, ensuring compliance with maximum allowable width. To complete your installation, the front adapter set includes four 4x8x3mm ball bearings.

View 4WD Wheel Adapters here


March 6, 2025

Serpent Racing Team T-shirt

Serpent has released a new for 2025 Racing Team t-shirt.  The neat high-quality cotton black t-shirt features a new front design of the Serpent logo with the slogan ‘Serpent Racing Team’.  On the rear of the shirt an oversized traditional all white serpent logo is displayed.  The tee is offered in sizes from small through to XXXL.

Source: Serpent [serpent.com]


March 5, 2025

Infinity IF18-3 6mm Shaft Set and Alu Chassis Stiffener

New from Infinity for its World Championship winning IF18-3 1:8 Nitro Onroad chassis are chassis are these optional 6mm Shaft Set and Aluminium Chassis Stiffener.  Using the optional 6mm Shaft Set, the drivetrain of the IF18-3 is lightened to improve response during acceleration and deceleration.  The weight is approximately 7g lighter than the 8mm shaft.  The optional Aluminium Chassis Stiffener greatly increases rigidity in the rear section of the chassis with the car’s turning ability is noticeably reduced.  This makes it easier to manoeuvre on extremely low-grip surfaces or high-grip surfaces where traction roll could be a problem.

View Aluminium Chassis Stiffener here


March 5, 2025

Kyosho MR-04 R246 Option Parts

Kyosho America has announced the R246 line of option parts is back with this MM2 Aluminium Motor Mount and MM2 Roll Damper Set for the MR-04 Mini Z.  The new R246 milled aluminium motor pod is one of the most optioned pods from R246 amd features infinite gear adjustment for just the right gear mesh.  A milled rear shock mount is included, as are offset inserts to adjust the height of the rear axle to accommodate larger diameter wheels and tires without upsetting the other aspects of the rear suspension geometry.

View Roll Damper Set here


March 5, 2025

Speedzone Evolution Brushless Motor

Speedzone have released their latest brushless motor under the American company’s Evolution brand.  Relying on some aspects learned from their last motor release in 2017, this latest motor delivers more power and efficiency.  The new design features a non-encased stator and universal aluminium end points that are not constrained by the wind etching.  The motor, currently available in 17.5, 13.5 and 21.5 winds, comes with a high torque rotor and the aluminium end points are notched for easy reassembly.  The light weight design makes this motor one of the lightest in the industry at 140g on the standard & select versions and 134g-137g on the tuned versions.  All motors are ROAR approved and are bench tested to ensure sensor, stator and ball bearings are all functioning to a strict quality control.

View Specs & more images here


March 5, 2025

FlySky FS-G11P Transmitter

A brand that has made a big impression on the RC market over the last 12-months, Chinese radio manufacturer FlySky has released its brand new high-performance ANT protocol FS-G11P transmitter.  The all new design style is equipped with a 3.5-inch 320×480 full-dot matrix colour IPS high-brightness non-touch display with a peak brightness of 2000 nits.  Featuring built-in omni-directional dual antennas for enhanced signal stability it is powered by 2 x 2600mAh 18650 batteries with ultra-low power consumption providing up to 14 hours of standby time.  The trigger features adjustable return force and position, suitable for a wider user group and the handwheel features physically adjustable travel distance with infinite positioning for maximum flexibility.

View more features & images here


March 4, 2025

Klinik RC NB|NT48 2.2 Carbon Center Diff Top Plate

US racing upgrade parts producer Klinik RC has released a Carbon Fibre centre diff top plate for the Tekno NB48 2.2 buggy and NT48 2.2 truggy.  The 4mm thick precision machined plate is much stronger and more ridged then the stock plastic top plate providing a more accurate brake feel and settings and is also lighter than aluminium.  The top plate also features two rubber sealed 5x8x2.5 flanged Avid ball bearings for the brake cams to easily rotate and reduce any slop.

View more images here


March 4, 2025

1up Racing Pro Pit Scale

New from American RC accessories brand 1up Racing comes this Pro Pit Scale.   The perfect pit companion for precise weight measurement of your diffs, parts, tyres, etc.,  it has a max weight of 500 grams and increments of 0.01 grams to gives you the capacity and precision you need, build after build.  It features stylish laser etched 1up logos on a durable stainless steel face, a blue backlit LED screen, 9 weighing modes, and a full-capacity tare range.  Included with the Pro Pit Scale are a protective cover, small parts weighing tray and AAA batteries for your convenience.

Source: 1up Racing [1upracing.com]