Red RC » News

November 2, 2023

Kurzbuch repeats in penultimate qualifier

Mugen Seiki’s Simon Kurzbuch has become the first driver to repeat a TQ run at the 1:8 Onroad World Championship as he made it two in a row in the penultimate round of qualifying in Japan. The Swiss driver managed the run perfectly as Infinity’s Naoto Matsukura pushed him for the TQ but on the last lap the Japanese driver once again ran out of fuel. This handed Dario Balestri the second fastest time, the Infinity driver just 3/10ths off. More than a second back, a big margin at these World Championships, Toni Gruber would complete the Top 3 just ahead of defending Champion Shoki Takahata with everything still to play for in the sixth & final round of qualifying at the Infinity International RC Speedway.

Continue reading here

November 2, 2023

Kurzbuch finally delivers TQ run in Q4

After difficult first day of qualifying in Japan, Top Seed Simon Kurzbuch finally delivered on his speed with the Mugen Seiki driver taking the TQ for the fourth round of 6 at the 1:8 Onroad World Championship. The 2015 World Champion would be more than 1.4 seconds quicker than his closest rival Yuya Sahashi as the first of the day’s three qualifiers saw a number of drivers in the top have issues. Infinity team-mates Jessie Davis and Naoto Matsukura were in the mix for a Top 3 run until they both ran out of fuel. Having TQ’d the second round yesterday, Capricorn’s Toni Gruber would make a driver error and end his run early. All this meant that running in the 3rd fastest heat Takaaki Shimo would complete the Top 3 for the round ahead of Dominic Greiner, Shoki Takahata and Dario Balestri. Having TQ’d the final qualifier yesterday but having had poor results in the previous two, reigning World Champion Takahata described Q4 as a ‘safe run’ adding he would ‘push more’ in the next one.

Continue reading here

November 2, 2023

Hong Nor X3GTS height-adjustable anti-roll bar

Hong Nor has released a new height-adjustable anti-roll bar for its World Championship winning X3GTS 1:8 GT chassis. Used by newly crowned World GT Champion Toni Gruber in Sydney last month, it not only allows the car to maintain a better balance but also allows for more delicate adjustments of the car set-up. Hong Nor offer four front anti roll bars for the car, 2.0, 2.3, 2.5 and 2.8mm, and four rear anti roll bars, 2.3, 2.5, 2.8 and 3.0mm.

Source: Hong Nor [hongnor-racing.com]

November 2, 2023

JConcepts S2 Schumacher LD3 body

JConcepts has released its popular S2 body for the recently introduced Schumacher LD3 1:10 2WD Buggy. The S2 is a performer straight out of the package and includes the Carpet | Turf rear wing to help deliver results on any racing circuit. Slammed overall height allows the S2 to whisk through the turns with a low centre of mass while the progressive cab design provides plenty of front-end force for superior balance and steering. A channeled roof directs the flow through the center of the body while also increasing the rigidity of cockpit. The dual side-window design that has become famous on the JConcepts bodies remains to bring a traditional feel to the layout. The upper side-pods feature distinct vents used to help relieve hot air build-up inside the body for those high-powered runs or hot days at the track. Carved and detailed side-pods edge the body giving the highly aero unit a stylish look with a tight fit and finish.

View more images here

November 1, 2023

3Racing Cero FWD Sport 1:10 Touring Car

3Racing has released a new entry level 1:10 FWD Touring Car chassis, the Cero FWD Sport. Featuring pivot mounted suspension, the car shares suspension geometry and key components with the popular Cero Ultra. Suspension knuckles are common across all Cero models, reducing required spare parts, as well as allowing upgrade to aluminium. The Lower suspension arms are molded in composite GA, featuring integrated pivot ball mounts. Fully adjustable ARS rear suspension, infinitely adjustable to adapt to changing track conditions. It has a quick change spur gear mount and the motor mount provides a wide range of adjustability to cater for all blinky motor applications. The Sport gets comes with a honeycomb TPU front bumper included as standard and the front lower bumper and body mount assembly has been redesigned for increased durability. A one piece bulkhead cover maintains alignment and rigidity. Horizontal rear body mount system, lowers centre of gravity and reduces body roll and risk of body tucks.

View more images here

November 1, 2023

Takahata takes Q3 as Balestri holds overnight TQ

In a thrilling first day of qualifying at the 1:8 Onroad World Championship, Mugen Seiki’s Shoki Takahata has TQ’d the third round of qualifying becoming the third different driver/manufacturer combo to top the times in Japan. The reigning World Champion capitalised on the cooling evening conditions to set the fastest time of the day ahead of Infinity’s Dario Balestri with Capricorn’s Toni Gruber completing the Top 3. Opening qualifying with a TQ run, it is Balestri who holds the overnight TQ at Infinity International RC Speedway ahead of Gruber who topped the second round of qualifying. With Takahata holding P7 in the ranking, his day not starting out well with a crash in Q1 and DNF in Q2, it is 17-year-old Kouki Kato who is the top Japanese driver sitting in third following an impressive second fastest time run in Q2.

Continue reading here

November 1, 2023

Rêve D Breve ESC

Japanese RC Drift specialists Rêve D has announced the release of their RD Spec Brushless Breve ESC with built in Bluetooth. The premium ESC combines high torque optimised for RC drifting, power, and high controllability that responds linearly to throttle operation at a high level. In addition to the basic performance that satisfies high-end users who want to win in competitions, it also comes pre-installed with drift setting data supervised by Rêve D engineer Hayato Matsuzaki to make it easy to use even for beginners. You can enjoy the performance of the Breve ESC immediately after installation. By connecting BREVE to a smartphone with the dedicated APP downloaded via Bluetooth, you can instantly change various data settings.

Continue reading here

November 1, 2023

JConcepts RM2 1:8 Offroad carbon bodyshell washers

Under the RM2 product line, JConcepts has released 1:8 offroad carbon fibre bodyshell washers. Adding carbon fibre never hurts, in the case of body mounts, you can protect the geometry of placement holes with the RM2 body shell washers. The thinly sliced carbon with adhesive backing is ideal to place in flat areas where additional reinforcement is needed. Due to the nature of carbon, it’s difficult to bend, so flat surfaces are recommended for application. Being a handy racer, the items can always be modified, cut, or relocated to better fit the needs. The inside diameter is set for an 8mm body post hole while the outer diameter is set to a much larger size to accommodate body geometry. Two of the pieces are slotted for movement and traditional chassis flex found on 1:8 offroad vehicles.

View mounted here