October 10, 2023

WMH Racing Motor Assembly Stand with Rotor Tool

Donathen RC has announced the addition of another WMH Racing product, the Motor Assembly Stand with Rotor Tool.  With the launch of WMH Racing and many motor tuning products it became clear that some sort of product was needed to hold all of the motor parts, while tuning/working on your motor.  The stand holds any 540 brushless motor with a choice of colours for stand and rotor tool.  It is designed to hold: stator, screws, sensor board, end caps, rotor, and rotor shims.  The Rotor Tool features gnarls to easily manoeuvre your rotor in place.

View more images here


October 10, 2023

Paloschi denies Hamon in penultimate seeding round

An impressive run in the third & penultimate round of seeding practice by Serpent’s Gabriele Paloschi has denied team-mate Jeff Hamon from securing an early top seed status at the 1:8 GT World Championship in Australia this evening.  Running a heat earlier than the championship’s title favourites, Paloschi’s impressive time went pretty much unnoticed as Hamon went on to top the final heat of the round from Toni Gruber, which the Aussie and almost everyone else thought had secured him the top seed spot for qualifying.  Running his three laps in 55.844, European Championship podium finisher Paloschi had ran his in 55.821.  With the second round of seeding a repeat of the opening run, Hamon from Andrea Catanzani and Xray’s Natanaele Senesi, Paloschi topping the third round moves him up to third in Serpent lockout of the top 3 going into the final seeding run in the morning.

Continue reading here


October 10, 2023

Catanzani just pipped by Hamon in first seeding round

Serpent’s Andrea Catanzani looked like giving us a new name at the top of the timing sheets at 1:8 GT World Championship as seeding got underway in Australia but with just seconds to go team-mate Jeff Hamon somehow managed to recover from a problematic start to the run to snatch it from the young Italian.  A run that would see a number of drivers in the top heat experience issues,  Catanzani was the first driver to break into the 54-seconds for his 3-consecutive laps and looking to save tyres was already down off the rostrum just after half way through the 10-minutes run with his time looking strong enough to hold.  Having set the pace yesterday, Hamon was also off the driver stand but for different reasons as he suffered brake problems.  Considering abandoning the run, with just enough time to make an attempt at 3-laps after fixing his breaks the Aussie pulled it off pipping Catanzani by 0.094 of a second. Having finished out yesterday’s controlled practice with some promising runs, Natanaele Senesi carried that form into seeding opening his account with a P3 for the first of the four rounds ahead of Paolo Morganti and Toni Gruber.

Continue reading here


October 9, 2023

Hamon tops final controlled practice ‘Down Under’

Controlled practice concluded at the 1:8 GT World Championship in Sydney this evening with Jeff Hamon setting the fastest time for the 6th & final round.  Despite everyone, including Hamon himself, expecting it to be the rocket round of the day, the Serpent driver was unable to better his time from the morning’s opening practice.  Over his best 3-consecutive laps the Aussie was almost half a second off his morning’s 53.981 pace around the John Grant International Raceway.  With a cool morning turning to 30+ degrees heat when the sun reached its peak in the middle of the day, the 6pm timing of the final practice in theory was going to present racers with the ideal track conditions for quicker times.  With drivers pushing hard to improve on their times, the majority failed, with the only drivers in the Top 10 to achieve that being Natanaele Senesi and Peter Jovanovic.  Xray’s Senesi surprised himself with the third fastest time for the round in between Gruber and defending Champion Joern Neumann.

Continue reading here


October 9, 2023

EcoPower Aluminum Clamping Servo Horn

New from A-Main Hobbies is their high-strength EcoPower Aluminium Clamping Servo Horn available for use with their EcoPower servos as well as other 25T splined servos.  This extremely tough servo horn has been machined from a solid block of aluminium for incredible precision, rigidity, and durability.  The horn features a clamp type design that grips the servo’s output shaft so if the retainer screw comes loose, the horn will have a better chance of remaining in place.

Source: A-Main Hobbies [amainhobbies.com]


October 9, 2023

Hamon sets early pace at GT World Championship

Serpent’s Jeff Hamon is the early pace setter in practice at the IFMAR 1:8 GT World Championship in Sydney, Australia.  Winner of the Worlds Warm-up Race back in April when the final was rained off, the Australian set his fastest 3-consecutive laps ahead of Hong Nor’s Toni Gruber – Hamon’s best run coming in the cool conditions of the morning first practice while Gruber’s best came in the 31 degree heat of the fourth of the 6 rounds on today’s schedule.  IGT8 boss Paolo Morganti sits third fastest with European GT Champion Bernard-Alain Arnaldi making it four different manufacturer at the top of the timing sheets driving his Genius Racing chassis.  With visiting drivers trying to get their heads around the low grip levels at the John Grant International Raceway track, which hosted the 1:8 Onroad World Championship back in 2001, European GT Championship Top Qualifier Andrea Catanzani sits fifth fastest ahead of the Sworkz of reigning World Champion Joern Neumann, who like fellow countryman Gruber found improvement in CP4.

Continue reading here


October 9, 2023

IFMAR release 126 strong 1:8 Onroad Worlds Entry List

With IFMAR’s newest World Championship 1:8 GT getting underway this week in Sydney, Australia, the World governing body has released the entry list for the upcoming edition of its oldest and original World Championship, 1:8 Nitro Onroad.  Scheduled to take place from October 27th to November 5th at Infinity International RC Speedway in Japan, the 23rd running of the categories biggest prize has attracted a strong 126 entries lead by reigning Champion Shoki Takahata.  With 24 countries represented, the host nation has come out in force to support the race making up just shy of 50% of the entry.  In addition to Takahata, who won the title for Mugen in California in 2019, his three title predecessors Dario Balestri (2017), Simon Kurzbuch (2015) and Tadahiko Sahashi (2013) will also compete.  The third time Japan will host the 1:8 Onroad Worlds, on the last visit it was a home win for then Serpent driver Sahashi.  Nine years later he would become only the second driver ever to be both a 1:8 and 1:10 Nitro Onroad Champion when he was crowned the 1:10 World Champion with Infinity in Thailand last year. Red RC will be making the trip to Japan to cover the event.

View entry list here


October 9, 2023

Isaacs does double at MonTech NYGP

The annual MonTech New York Grand Prix took place over the weekend where Awesomatix driver Sam Isaacs stamped his authority on the fifth running of the event with victory in both Mod 1:12 and Touring Car.  Held at 360v2 RC in New Rochelle, New York, 1:12 qualifying would see Isaacs secure the TQ with his Q4 run from Donny Lia, Kemp Anderson and Keven Hebert.   With a single 8-minute final to decide the winner, Lia would find a way passed the pole sitter after 16-laps holding it for 20-laps before going out of the race which allowed Isaacs to win by a 2.4-seconds margin from Anderson and Hebert.  In Touring Car,  Isaacs was also the Top Qualifier and in the single 5-minute final led from start to finish to win by almost one & a half seconds from ROAR Champion Herbert and Anderson, the Top 3 remaining unchanged to how they qualified.

Image: 360v2 RC [Facebook]