Red RC » News

August 20, 2022

Exotek Racing F1 Tires

Exotek Racing has released its first entry into the 1:10 F1 tire segment. Designed 100% from the ground up, and taking cues from the new full size F1 wheel disk regulations, they have taken all of the best elements of RC F1 tires from the past and engineered them into the ultimate F1 rubber tire and wheel set up. Exotek contracted to have these produced by the premier RC rubber touring car tire factory in Japan, using premium touring car rubber compounds and nylon for wheels.

View more details and images here

August 20, 2022

Rheinard takes TQ at ETS Germany

Marc Rheinard is the Top Qualifier at ETS Germany, the Awesomatix driver topping two of the four rounds of qualifying at his home track in Andernach. With driver’s travelling to Arena33 for the third round of the series and to make final preparations for the upcoming World Championships, it was Yokomo who set the pace in the opening qualifier on Friday. Yannic Prumper was fastest from team-mate & Round 2 winner Christopher Krapp. Picking up where he left off from his recent German National title win two week earlier at the same track, Rheinard’s Awesomatix topped the times in Q2 & 3 which would be enough to secure pole position. Despite not having a good final qualifier, Prumper will start second with Q4 pace setter Krapp P3 ahead of the Xray of Marco Kaufmann and Mugen’s Ronald Volker. Highest non German driver on the grid is Awesomatix’s Lucas Urbain in P6 followed by the Schumacher of offroad ace Michal Orlowsk. It was a good qualifying for Awesomatix at Arena33 with Max Machler the Top Qualifier in Pro Stock ahead of the similar car of Simon Lauter. Xray’s Jan Ratheisky qualified third.

Image: ETS [ets.racing]

August 19, 2022

Infinity IF15 long life rear belt and upper arm spacers

Creation Model has added two new optional parts for use on their IF15 and IF15W 1:10 onroad nitro chassis. The Long Life Rear Belt is made of a special rubber with excellent durability that will achieve longer life than the soft rubber type of the kit’s standard parts. The belt is especially effective on the IF15W with high grip wide tires. The front upper arm 0.3mm spacers, supplied as a pack of four, can be inserted between the front upper arm holder and the upper deck to fine tune the roll center and camber change rate, enabling smooth and high speed cornering.

View front upper arm spacers here

August 19, 2022

RC Maker 3D Pro Carbon ultra-lite body stiffeners

RC Maker introduce their 3D Pro Carbon Ultra-Lite Body Stiffeners and Wing Mount & Anti-Tuck Stiffener Set for 1/10th EP Onroad. The biggest talk in touring at the moment is Low Centre of Gravity and Aerodynamics. Stiffer bodies normally come at the cost of weight and centre of gravity, making it difficult to have a lightweight, yet rigid shell. These one-piece stiffeners combine very thin carbon rods with the latest 3D Printing technology to provide a feather weight of only 2.5g! The centre is attached with the supplied double sided tape, and the sides with the provided M3 Screws to provide a very lightweight, stiff and easy to install solution.

View more images and details here

August 19, 2022

SMJ rear bumper line extension

Following the recent release of information by EFRA regarding bodyshell measurements/checking for the up coming World Championship in Italy, SMJ has been quick off the mark with the release of this Rear Bumper Extended Underskirt. Created for the XTREME Twister / Twister Special bodyshell it will be possible to make these comply with IFMAR and JMRCA regulations for both the IFMAR World Championship and JMRCA All Japan Championship. With the use of this product, 3D modelling to 100% fit the rear bumper shape, molded from 0.5mm thick lexan. The body panel is also a considered shape, so the rear bumper will be flat after installation. Release date, price etc will be announced later.

View full Rear Bumper Extended Underskirt here

August 19, 2022

Pro-Line 1:8 Axis Wing

Pro-Line has added this new Axis Wing to their range of 1:8 Buggy products. Tested extensively by Pro-line’s Factory Team drivers, the Axis wing provides increased forward traction, high-speed stability, and jumping consistency. It includes an add-on wicker-bill that allows you to tune the performance of the wing to your liking along with pre-marked dimples across the rear of the wing, for drilling holes to combat windy conditions and reduce drag. IFMAR-spec endplates provide the ideal side bite in loose conditions. Mounting the wing is made easy with markings for 40mm and 48mm wing mount widths and 5 fore/aft positions. Made in the USA, the Axis wing is available in white or black.

View more images of wing here

August 18, 2022

Pro-Line Racing B6.4 Axis Light Weight Body

Pro-Line Racing has introduced this new Axis light weight body for Team Associated’s B6.4. Featuring a super low-slung design with sharp lines throughout, the Cab-forward design provides enhanced steering response while the small side fins balance out the rear of the car with ideal side-bite. The rear of the Axis body has the right amount of clearance for the gearbox and fits the chassis and bulkhead shape of your race buggy perfectly.

View more images here

August 18, 2022

Sweep Racing VHT Crusher-10 White dot drag racing tire

Sweep Racing has released a new white compound option of their VHT Crusher-10 Drag Racing tire. This is the 3rd compound option for Street Eliminator Drag Racing. After the soft launch of in Red and Black X-dot tires and taking the class by storm, they are proud to introduce White dot tires. The White dot is made out of the same rubber as the Red dot but a tiny bit stiffer to prevent chirping on hot days at the Drag Strip, the rubber mixture perfected over a year of R&D at Sweep’s US facility. Sweep say the tires require none to minimal balancing to be competitive with just a very light burnout needed on a wool carpet.

View inside tyre structure here