Red RC » News

July 31, 2008

Rheinard tops Opening Day at Euros

Marc Rheinard action

At the end of the opening day of the 1:10 EP Touring Car Euros it is German ace Marc Rheinard and his Tamiya that top the time sheets here in Vila Real. Rheinard knocked a second off his opening timed run to remain fastest of the 145 runners while team-mate Viktor Wilck who was the next fastest in P4 jumps up into second. The German ran a new car for the final run of the day which he said felt different to the chassis he used in the earlier runs. The second car had more traction but was pushing more and so he remains undecided as to which chassis he will nominate for the start of qualifying.

Check out the full coverage on our event site here.

July 31, 2008

Rheinard tops first timed practice

Tamiya driver Marc Rheinard has topped the time sheets for the first of the timed practice runs here at the 2008 Euros in Vila Real, Spain. Posting a time of 17 laps in 05:10.830 the German was 2/10th faster than fellow countryman and defending champion Ronald Volker over the 5 minute run. The 2008 European 1:12 Champion, Rheinard said his TRF416 was pretty good but he will run a fresh car in the last run of the day.

Check out the full coverage on our event site here.

July 31, 2008

Euros 1:10 – New in the pits

Corally RDX Phi prototype parts

A quick look through the pits here in Vila Real have revealed a number of new products being run and tested by some of the top drivers. Corally racer Marc Fisher from Germany is running some new prototype parts on his RDX Phi. There are new rear uprights that have 1mm lower top mounting points, also the front steering blocks have received some attention together with the new servo saver part that has simpler to adjust Ackermann.

Check out the full coverage on our event site here.

July 31, 2008

Losi Bearing & Clutch service boxes

New from Losi for use with their 8ight range of chassis’ are two new spares boxes. The first box contains a complete ball bearing set for all 8ight-based race and RTR models and comes in a reusable box. This boxed set includes all of the necessary bearings you need, and is a cost-effective alternative to purchasing individual bearings. Losi have also released a clutch rebuild and service set, which includes all the service and tuning parts necessary for rebuilding the 8ight and 8ight-T clutch in one box.

Click more to see the clutch rebuild box… content

July 31, 2008

Southport Nationals report by oOple

Our friends at oOple are reporting on the recently held Southport National, the penultimate in the 2008 BRCA National series, which saw the 2WD title decided early, with another TQ and win for Ellis Stafford driving the XFactory X6. Ellis was in command and took three qualifying rounds to take the TQ, and won the second and third A final legs to take the meeting, and with the valuable points secure the 2WD championship title in the process. Neil Cragg had a surprise up his sleeve in the 4WD event, the new Yokomo B-Max4 had made it after all. After Yokomo flew around the world to deliver the car the Thursday before the event, Neil didn’t hold back, taking all four rounds of qualifying and the first two A final legs. Only a win from Lee Martin in leg three with Cragg second, stopped a ‘total domination’ from the Craggster.

Read the full report here, including lots of great photos and interviews.

Source: oOple [oople.com]

July 31, 2008

Xray XB808 CVD drive axles

New from Xray for the XB808 are these CNC-machined CVD drive axles, which have been made from premium lightweight Swiss 7075 T6 hardcoated aluminium. Strategically-machined, super-lightweight drive axles are specially designed and produced for high-competition racing. The reduced weight is almost 3x less than the stock wheel axle, with a total weight saving of up to 20g for all 4 wheel axles. Precision machined with highest tolerances using premium fully-automatic German CNC-machines. High-quality hard coating is done at Xray’s own in-house fully-robotic hard coating line, ensuring a perfect hardcoated surface every time.

Source: Xray [teamxray.com]

July 31, 2008

Euros 1/10th Second Practice update

Elliot Harper

Second practice for the 2008 EFRA 1:10 EP Touring Euros has been run here in Vila Real but with no official timing the picture of who is doing what is still uncertain as drivers continuing to still settle themselves in. Elliot Harper, winner of the Warm-Up Race back in June, says it is a lot hotter and as a result the track characteristics are very different now. The emerging UK talent, who just took his first British National win two weeks ago, says his Nosram powered Xray is working well but with the extra heat it is going off slightly at the end of the run. Harper will make a few changes to fine tune the car for the first of the two timed runs this afternoon.

Check out the full coverage on our event site here.

July 31, 2008

Euros 1/10th – Practice update

Jilles Groskamp

Drivers have had their first official practice run at the 2008 EFRA Euros here in Vila Real with most drivers reporting an incident free run. Jilles Groskamp suffered the biggest drama of the morning when he lost a front wheel off his Tamiya. ‘I adjusted the front camber just before my run and when I put on my front wheels I tightened the nuts by hand and then afterwards forgot to do them up properly. It was a novice error but then I am a novice driver.’ With all four wheels on his car, the Dutch racer said his car felt pretty OK.

Check out the full coverage on our event site here.