Spektrum have released this deluxe metal transmitter case designed to protect the Spektrum DX2.0, DX3.0 and DX3R systems from bangs and jolts. Fitted with 2 precut foam inserts to fit all current Spektrum surface systems, it comes with a damage resistant exterior, anti-slip comfort-grip handle and sports the Spektrum logo on the side.
Source: Horizon Hobby [horizonhobby.com]
Kyosho have released optional aluminium front suspension mounts for the Evolva M3 1/8 on-road racer, which strengthen the front suspension assembly and improve durability. The machined aluminium mounts are packaged with woven graphite 0.5mm and 1.0mm shims that are used to adjust front suspension geometry, plus all the hardware that’s needed to install the mounts.
Click here to see the brackets mounted… content
Xray have released these high-performance racing springs for their XB808 buggy, that have been specially developed to give better balance and an additional range of choices to fine-tune your car. Developed through extensive testing and racing experience, these linear springs use the same thickness of wire for each spring, and stiffness is controlled by the number of coils. Softer springs have a lower “C” value and more coils; stiffer springs have a higher “C” value and fewer coils. Available as a pair of springs – to fit front and rear – the springs are individually measured, controlled, inspected and matched to provide identical damping characteristics. During the selection process, each spring is compressed in several fine increments and the values recorded, and then each spring is matched with another spring of identical characteristics.
Click more to see the rear springs… content
Seen at this weeks ROAR 1/8th scale buggy Nationals at Thunder Alley in Beaumont, California, are these big bore shock absorbers on the Associated RC8. Currently being used by the factory team at this race, they are close to release pending some final parts getting produced. Also seen on some of the team cars, is new steering geometry, which combined with the new shocks increase corner speed and improve rough track handling. New from Reedy is a yet unnamed proprietary .21 engine in the final stages of testing and is being run by Rick Hohwart and Scott Brown at this event.
Click here for more pics… content
The warm up race for this years Electric touring car European Championship was run last weekend at the host track in Vila Real, Spain and there were 40 racers in attendance, with some international racers in attendance. Qualifying for the race saw young UK rising star Elliot Harper, driving his Xray, take pole position ahead of current UK National Champion Chris Grainger in 2nd for Yokomo, while Spanish racer Toni Mateo in 3rd. The finals saw complete dominance by Harper who won all 3 legs of the A-main to take the overall win ahead of the Spanish pairing of Toni Mateo and Marc Esbri Vilar in 2nd and 3rd.
Click more to see the final standings… content
Round 3 of the Belgian Nationals took place at the tight and technical Houthalen track in dry and sunny conditions. The T1 class qualification went the way of Kyosho driver Marten Kempeneers who ended up ahead of Xray drivers Jerome Renaux, Jonathan Sanza and Steve Lambrech, while in the T2 class it was another Xray, that of Cedric Gils that took the pole position. The start of the T1 final went the way of Yerna Hugues that took the lead for the first 5 minutes, but problems dropped him down the order. This left Kempeneers in the lead which he held on to until the final 5 minutes when a lack of tires meant he was passed by Serpent driver Manuel Henriet who took the win, while Kempeneers held onto 2nd ahead of Stephane Roufosee in 3rd. The T2 class went the way of the pole man Cedric Gils who won ahead of fellow Xray drivers Renaud Gysembergh and Vazza Donato.
Click more to see the T2 podium… content
Team Associated have released a number of new performance parts for their TC5 electric touring car. Starting with this new Slipper spool kit which has been developed to help minimize damage to the CVA bone blade under high load conditions, such as hard impacts and large bumps. New for that spool kit are some new slipper pool pads, sold in a pair they are a direct replacement for the standard parts. Finally for the TC5, there is this bearing cam holder set that allows for more adjustment in the belt tension, specifically when a looser tension setting is required.
Click more to see the other products… content
Losi have released this classic look t-shirt featuring an old school college shirt design that is so popular at the moment. Available in the usual range of sizes, the grey speckled shirt features a large red print on the front, which I wont explain as you can just check it out in the picture above.
Source: Losi [losi.com]
