Red RC » News

March 6, 2008

Piktor Rush 2 Clothing line

French manufacturer Piktor, makers of the Philippe Lachet designed Rush 2 1/8th scale buggy, have announced the release of their 2008 clothing line up. Consisting currently of 3 items, racers can choose for the white 100% cotton t-shirt featuring the Piktor logo in black combined with a red line design on the front side, while the rear has a Rush 2 design incorporating a picture of the car. When it gets a little colder you can go for the black fleece lined wind breaker jacket that also sports the Piktor logo on the front and a large Rush 2 logo on the back. For the finishing touch, and suitable for all weather conditions, there is the black and grey cap with the Rush 2 logo embroidered on the front.

Click here to see the other clothing items… content

March 6, 2008

Rúben Francisco wins Portugal Nats Rd1

The first round of the 2008 Portuguese National Championships for Electric touring cars took place last weekend on the large Coimbra track in the centre of Portugal and it was Speed Passion sponsored driver Rúben Francisco that took the win. Sunday morning started with the qualifying heats and these saw Xray driver Nuno Gancho take the TQ spot followed closely by Rúben Francisco who ended on the same points. In the finals there was some bad luck for the pole man and this allowed Rúben to take full advantage, win two of the three finals to take the overall with his Schumacher.

Source: Info RC [info-rc.net]

March 6, 2008

Hot Bodies Factory Tools

A few days ago we wrote about some new releases from Hot Bodies, which included a new range of tools. Hot Bodies have now released more information about that range and besides the standard hex wrenches and screw drivers, there are also some set-up tools and turn-buckle wrenches. For helping with set-up, HB have released this black anodised droop gauge and matching pair of 20mm tall droop blocks, with the gauge able to measure from 0mm to 10mm in 0.5mm steps. For adjusting 3.7mm turn buckles HB have released a 80mm long wrench, which like the other tools is black and sports a HB logo on the side.

Click here to see the other products… content

March 6, 2008

Sven Zünd takes LRP Islikon Masters Rd4

Robitronic have a report on their website from the 4th round of the LRP Islikon Masters in Switzerland. The race was run on controlled tires and the softer, better performing 27-compound was very hard to get on this weekend, therefore some clever tactics were needed and Sven Zünd with his Robitronic Avid made the most of the difficult situation, saving his tyres for the final round of qualifying and the finals. Starting from the pole position, he was able to take the win ahead of the Xray driving Lnenicka brothers Ronny and Sacha who finished in 2nd and 3rd respectively.

Source: Robitronic [robitronic.eu]

March 5, 2008

ETS Rd2 Denmark – Event T-shirt

ETS Rd2 Denmark - Event T-shirt

We promised to show you the artwork for the t-shirt that will be given away to all competitors at next weeks 2nd round of the Much More backed European Touring Series that takes place in Vejle, Denmark. And here it is, fresh from promoter Scotty Ernst, who had this to say:

The T shirt design turned out better than we could have hoped for. Dusty Kemp the designer did a great job of bringing an exciting and colourful design to these event shirts and we’re sure everyone will really enjoy them. Each racer attending the event next weekend will get a free shirt included with their race entry, just another great benefit for participating in the Euro Touring Series.

Do you want to race against some of the World’s top touring car racers, while being commentated on by the legendary Scotty Ernst, in a fun and friendly, yet professional racing atmosphere then be sure to get your entry in for round 2 of the ETS by going here.

March 5, 2008

Jaad Racing Tuned shock towers

Jaad Racing have released some new additions to their Tuned Shock Towers range with new shock towers for the Tamiya TRF416 and the Serpent S400. Made from carbon fibre, there are new pieces for both the front and rear of both cars, with all providing more tuning possibilities with regards the shock absorber angle.

Click more to see the Serpent shock towers… content

March 5, 2008

Kyosho dNaNo FX-101 1/43rd scale

Seen here first at the start of February, Kyosho have released full details of their new dNaNo concept on its dedicated, Japanese only, website. These 1/43rd scale cars make the company’s Mini-Z line look big, yet they are extremely detailed and are true radio controlled race cars. Available in 3 different chassis versions, with varying wheelbases and motor positions, the cars are controlled by Kyosho’s KT-18 2.4GHz radio system and are kept stable on the track, we are told, through the use of a mini built in gyro. Powered by a tiny 3.7V 130MAh LiPo cell, the car sports a rear differential and power is supplied through a micro coreless motor, originally found in mobile phones to produce the vibration, but then optimised. To enable the racer to easily compete on different tracks, each car is supplied with its own IC Tag (transponder), which you can see as in blue on the bottom of the car in the picture above. If you want one you will have to wait, but that will give you time to choose between the Ferrari Enzo, Ferrari 360 Modena, Murcielago LP640, Nissan Skyline GT-R, Porsche 962C LH and finally the Mazda 787B.

UPDATE: Click more to view some pictures from today’s product launch… content

March 5, 2008

Ryan Maker joins Team Xray

Team Xray Australia have announced that young Australian racer Ryan Maker has signed to race the Xray range of touring cars for 2008. Commenting on his deal to race the T2’008 & NT1, Ryan had the following to say:

Privileged to be racing for Team Xray. I really enjoy being able to race for Xray as their car’s quality and performance is outstanding! I would like to thank Custom Model Cars and Team Xray and Hudy for all their support.

Source: Xray [teamxray.com]