Red RC » News

January 30, 2008

Team Associated RC12R 1/12th scale

The guys over at RC50.com have been going through the pits at this weeks Snowbird Nationals in Florida and came across the new Associated RC12R, a soon to be released 1/12th scale link car with Associated offering a T-plate version available as a conversion set. According to the team driver running the car, the last parts have been approved last week and so kits should be out in about two months. The car sports a neat front end that allows you to adjust the track width inboard instead of shimming the axle.

Head over to RC50.com for more photos.

Source: RC50 [rc50.com]

January 30, 2008

JConcepts Goose Bumps Tires

JConcepts have announced the March release of their Goose Bumps tires in both blue and yellow compound for use on truggies. The totally unique step pin and bar lug design combined with sticky compounds allow even greater control on slightly loamy and wet conditions. Designed for maximum performance when new or used as the design allows even wear all the way down to the tire body and once the driver wears through the initial pin, a bar follows to maximize potential on aggressive surfaces.

Source: JConcepts [jconcepts.net]

January 30, 2008

Reckward Tuning RC8 & Mugen parts

Vita Tuning in Germany have produced some new parts for Reckward Tuning, in the form of new engine blocks and pivot balls. First up is this new 2-piece engine mounting block for the Team Associated RC8 that has been machined from alloy and is designed to allow you remove, and put your engine back in, without having to re-align your engine each time. Also new for the Mugen MBX5R and MBX5T is this set of 7mm pivot balls, that are also available in 6.8mm for the Losi 8ight, which are supplied with the fastening materials and have more clearance than the standard balls.

Click here to see the pivot balls… content

January 30, 2008

Joern Neumann wins Kyosho Indoor

Joern Neumann wins Kyosho Masters

Serpent have a report from their team driver Joern Neumann who was in action last weekend at the Kyosho International Indoor in Ostrava in the Czech Republic. The event was held in a large ice hockey arena with the surface made up of carpet and a kind of grass, which made tire choice very difficult. Following some tire tests, Joern found the correct balance and managed to win 3 of the 4 qualifiers to take the event TQ. Once through the semis, in which he drove most of the final in 2wd after a broken drive shaft, he was able to pull out a clear lead in the main final, winning by 2 laps from Kyosho driver Daniel Reckward in 2nd and Gerhardt Frank in 3rd.

Source: Serpent [serpent.com] / Image: RC Car Ostrava [rccarostrava.cz]

January 29, 2008

Daily News Round-up

A summary of other news pieces from around the internet today in our Red RC Round-up:

> Perfect S400 debut for Tim Wood – Link [serpent.com]
> Phil Chambers wins British Indoor Winter Series Rd3 – Link [mirageracing.com]
> Tom Kalves takes Prostock win in Kuusanko, Finland – Link [serpent.com]
> Team Exotek release M18 & Spada foam bumpers – Link [exotekracing.com]
> Team Corally 4200UP matched cells – Link [rctouring.eu]
> Xray report on the International Friendship Race – Link [teamxray.com]
> Buggy prototype of Joern Neumann – Link [neobuggy.net]

January 29, 2008

Puerto Rico National Championship Rd1

The first round of the Puerto Rico Championships was held last weekend in Barceloneta, with the event open to 1/8th scale and 1/10th 200mm. In the 1/8 scale class it was Mugen team driver Andy Báez that took the TQ spot and in the 30 minute final the IDM powered racer took the win by 1 lap in front of Juan C. Rodríguez in 2nd and Fernando Méndez in 3rd. In the Sedan class it was again Andy Báez that took the TQ with his Mugen but in the final finished 2nd after a long battle with Kyosho driver Geovanni Gónzalez. In the end of the 45 minute final the gap between to first and 2nd placed racers was 3 laps with 3rd placed Jesús M. Rivera a further 2 laps back.

Click more to see the final results… content

January 29, 2008

Losi Mounted XTT Truggy tires

Losi pre mounted XTT Truggy tires

Soon to be available from Losi are these pre mounted and glued blue compound 1/8th scale XTT Truggy tires. Tire gluing is a time consuming pain in the neck and get it wrong and have to deal with the embarrassment of your tire flying off while on track. These new pre mounts are supplied with foam inserts that have been developed specifically for the rigors of off-road racing and you can choose to have the XTT tires pre glued to your choice of white or yellow racing wheels.

Source: Horizon Hobby [horizonhobby.com]

January 29, 2008

MAD Racing IDEA 4×2 Buggy

French manufacturer MAD Racing have been in touch to tell us about their latest 1/8th scale buggy for the Southern Europe specific 2wd class, called the IDEA. Based loosely on a Team Associated RC8, the car, as you would expect, doesn’t sport any front drive train and thanks to the lack of a central drive shaft the engine is now no longer in line. Power is driven to the rear wheels through a custom made gearbox whose casing doubles up as the cars engine mount and rear braking system for an ultra stiff construction. The car also features double piston suspension, while the car’s drive gear sports a unique adjustable prototype slipper.

Click here to see more pictures… content