Red RC » News

December 18, 2007

Exotek R3 M18 Pro Conversion

Exotek Racing have released an all new design concept for the R3 this time around with the goal to use Lipo batteries in the M18. The chassis plate has been machined to make a pocket in the 2mm thick chassis to protect LiPos from being damaged from the track surface, yet still maintaining the low profile and super narrow features of their R3 chassis. For the die hard NiMh racers, the chassis still accepts 6 cells side by side and with the addition of multiple tape slots in the battery compartment you are able to position your battery exactly where you want it to adjust the cars balance. The R3 now also accepts micro servos such as the Hitec 85MG and for improved car control, the R3 continues to use its unique mono crank steering system.

Source: Exotek [exotekracing.com]

December 18, 2007

Xray NT1 Receiver Switch set

Xray have announced the release of this complete receiver switch set for the NT1 that fits directly into the car’s composite receiver case. This pre wired mechanical on/off switch, for quick & easy powering/shut down of on board electronics, comes supplied with a moulded rubber cover that protects the switch from contamination by fuel and dirt. Comes fitted with Futaba J connectors.

Source: Xray [teamxray.com]

December 18, 2007

RT Symbio Truggy body T2

Reckward Tuning have released the second version of their unique looking Symbio truggy body shell, suitable for the Mugen MBX-5T or Jammin X1-CRT. Made from 1mm thick high quality polycarbonate, the outer contour comes pre cut, while the rear of the shell has a R-Line diffuser for that aggressive look. Supplied with Symbio decals and window masks, refueling is possible with all fuel guns on the market through the front window.

Click here for more pictures… content

December 18, 2007

JConcepts Rulux racing wheels

Off-road racing wheels are subjected to the most severe abuse and JConcepts Rulux wheels are designed with racing and bashing in mind, while allowing your vehicle to look its best while doing it. The Rulux wheels spoke design combined with the inner rib detail is the result of rigorous testing by qualified drivers in a variety of conditions. Incorporating an outer glue catch that resists excess glue from running down the wheel face during the gluing process, all wheels are branded with the small JC logo for brand identification and authenticity. The JConcepts Rulux wheels are available in the 2 most popular color combinations, bright white and fluorescent yellow.

Click here for more information… content

December 17, 2007

DHI Cup – Control tire change

DHI Cup change control tire

We received word from the organisers of the DHI Cup, an event that Red RC will cover live, that they have decided to change the control-tires because Much More could not guarantee a sufficient supply of their AT-32 tire. So for the 2008 edition of the DHI-CUP, racers will use the Much More Sweep LHS carpet tire with JB foam inserts and pre-glued on JB X-tra Hard wheels. The sweep tires are a new development made especially for carpet racing and tested by Much More team-drivers. To supplement the tires the organisers have also bought the same carpet as used at the ISTW race in October.

Source: DHI Cup [dhi-cup.dk]

December 17, 2007

Ryan Maifield dominates JConcepts Clash

JConcepts contacted us to tell us about their great JConcepts Clash that was run recently in Lake Park, Tampa, Florida. As promised “The Powers Exploded” and a unique event, which featured electric and nitro vehicles competing on the same day, was launched. The event was open to sportsman and expert classes thus catering to drivers of all skill levels. Ryan Maifield driving his Team Associated RC10B4, B44 and RC8 vehicles dominated the extended A-main events using JConcepts Racing Tires. In the 2wd Modified class Ryan used on his RC10B4 to win the 10-minute A-main event, while UK National 4wd Champion Lee Martin TQ’d the event. In the 4wd Modified class Ryan took his B44 to a convincing victory in this highly competitive class, while in the 1/8th buggy class Ryan took his Team Associated RC8 to victory in this prestigious class, while once more it was Lee Martin that took the overall TQ.

Click more for lots of pictures… content

December 17, 2007

Walker & Brimmer claim 2007 NZ titles

The New Zealand Nationals for 1/8th scale buggies and truggies was held over the weekend and it was Australian driver Wayne Walker that came away with the 2007 National buggy title. Having lined up first for the hour long final, the Mugen racer was able to pull out a lead ahead of 2nd placed HongNor racer Peter Brimmer to finish 2 laps ahead at the end of the race with Associated racer Ryan O’Connor in 3rd. In the truggy class it was pole man Peter Brimmer, racing the HongNor X1CRT, that took the win by 2 laps in front of Kyosho driver Mike Stratford with 3rd placed Tim McKay, driving the Xray XT8, a few seconds further back at the end of the hour final.

Click more for the final results… content

December 17, 2007

Elliott Harper joins Team Xray

Elliott Harper joins Xray

Rising UK touring car star Elliott Harper has made the switch from Hot Bodies to Team Xray with whom he will race the T2’008 EU 5-cell spec chassis. Elliott is a well know touring car driver with some impressive results that include winning the modified class at the 2006/7 BIWS as well as being crowned the 2007 BTCC Modified Champion, he backed those results up with an impressive performance in this year modified BRCA Nationals where he finished 5th overall amongst some really tough competition. Elliot will be using Nosram Matrix Evolution ISTC speed controls, Matrix Storm Evolution Motors, VTEC Big Mama 4200 cells with the Nosram Stealth Evolution Charger.

Source: Mirage [mirageracing.com]