Red RC » News

November 5, 2007

Daily News Round-up

Red RC - Daily Round-up

A summary of other news pieces from around the internet today in our Red RC Round-up:

> Over RC report from the HPI/Orion Cup Touring Classic – Link [overrc.com]
> RB Products report from the GP de Pierrefeu – Link [rbproducts.com]
> Mirage Hoover Up at Rug Racers – Link [mirageracing.com]
> Jared Tebo wins at the Nitro Cross World Champs – Link [neo-buggy.com]
> Report from Off-road Indoor Race XZ – Link [teamxray.com]
> Nicholas Zachariades is 2007 Cyprus 1:10 National Champion – Link [serpent.com]
> LRP wins IIC TC Mod Rubber and TC Mod Foam classes – Link [lrp.cc]

November 5, 2007

Shepherd Micro Racing Velox

As we have published several times before, including an in depth report from the World Championships in Argentina, Shepherd Micro Racing will release their latest 1/8th scale, the Velox, very soon.

After an extensive test stage Shepherd are proud to offer a sophisticated and well-engineered product soon. It was always important for us to develop a model that suits both the hobby driver and the pure competition racer. The potential of this car has already been on both a national and international setting with a 3rd and a 4th place obtained by Robert Pietsch at this years Lostallo and Grenoble EFRA GPs. Also at the European Championship in Lostallo Robert just missed out on the final with an 11th place, while at the World Championship in Cordoba he also just missed the final, placing 15th overall due to being bumped from the track while in third position in his semi-final. The biggest success so far however has been the victory of Robert Pietsch and the 6th place of Patrick Schäfer at the 2007 German 1/8th scale National Championships.

Continue reading about the Velox… content

November 5, 2007

K-Factory E4 option parts

K Factory E4 option parts

K-Factory, the option parts wing of Team Magic, have released the first after market parts for the very new TM E4 190mm EP touring car. First up is an alloy middle top deck mount which increases strength to this area in the event of a crash as well as reduce chassis flex for improved tuning abilities and cornering performance. Next up is a new aluminium middle shaft mount that replaces the standard plastic part and is designed to improve durability, performance and looks of your E4. The aircraft quality 7075 aluminium is machined to perfect tolerances and provides increased transmission efficiency thanks to reduced flexing during high load acceleration.

Source: K-Factory [kfactoryracing.com]

November 5, 2007

Team Honest Motonica P8.0R oneway axle

Japanese Motonica importer and after market parts producer Team Honest have released this one way axle for the Italian company’s P8.0R 1/8th scale. The strong but lightened axle sports a metal 24T front pulley which is said to increase the life of the front belt as well as prolonging the life of the pulley itself. The axle is fitted with quality oneway bearings that are tightly pressed into the axle and ensure that all the power is consistently delivered to the front one way axles.

Source: Team Honest [teamhonest.jp]

November 5, 2007

Nir Sivan wins 2008 Israeli League Rd1

We received this report from the first race in the 2008 Israeli League for 1/8 scale buggy that took place last weekend at the Farm 07 race track near Ashdod. This was the first race of eight that are scheduled to be run in the 2008 Israeli Season with the 6 best out being counted. Top drivers all over the country, North and South participated the event and it was Yaniv Sivan that claimed the TQ after qualifying but a clutch problem in the Semis cause him to lose his place in the Final.

Continue reading… content

November 5, 2007

Xray T2 Aluminium Rear upright

Xray have released an updated version of their T2 aluminum rear uprights which now feature two new roll center positions, giving the user a total of 4 different roll center positions. The super-fine tuning roll center positions allow for very small set-up adjustments to tailor your car to different track conditions, as well as different on tire choice (rubber or foam). Roll center positions may be additionally adjusted by using shims of different thickness to alter the height of the roll center link.

Source: Xray [teamxray.com]

November 4, 2007

New Xray 1/8th Buggy?

New Xray 1/8th Buggy

Our partners Neo Buggy have gotten pictures of what looks like the new Xray 1/8th scale buggy from this weekends Nitro Cross race in the US. The most noticeable changes are the front and rear shock setup which is comparable to that on the Team Associated RC8. There have been rumours afloat that XRAY are working on a follow up to their XB8 which was launched in 2004.

Click here for more pictures.

Source: Neo Buggy [neo-buggy.net]

November 3, 2007

Radical RC Z8 1/8th scale buggy

Introducing the new Z8 from Radical RC, a 1/8th scale buggy that is said to feature some new and innovative design features. However, this buggy is very much the same of all others on the market, sporting CVD’s on all 4 corners, 5mm thick alu shock towers, carbon fibre radio tray, alu chassis braces, big bore shocks etc., and while it has a good spec the only outstanding, or innovative, feature is that this Pro Kit comes with a Lifetime Replacement Warranty on all plastic chassis parts. While it wont make you go around the track any faster, it will help you in the learning process of going quickly, and is a good selling point for beginners to this class. This warranty will also be available on the RTR version of the Z8 Buggy when it comes out.

Click more for the full features list… content