Red RC » News

October 1, 2007

Edit RC Optional Imperial bearings

Edit RC optional bearings

Edit RC have released a number of new imperial sized high quality bearings to keep your vehicles running free and efficient at all times. Available with both ceramic or standard steel balls, the ceramics versions are ABEC 5 (ISO Class 5) rated, meaning that these bearings are of the highest precision useful for land based R/C models applications, while the ceramic balls extend life and increase resistance to heat. They may have a tighter tolerances for fit than the non ceramic ABEC 3 bearings, but not too tight so as to reduce bearing rpm. The new sizes available include 1/8″ x 5/16″ x 9/64″ Flanged Ball Bearing (2pcs) and 1/4″ x 3/8″ x 1/8″ Ball Bearing (2pcs) with both types available with standard and ceramic balls.

Click here to see the other bearings… content

October 1, 2007

Serpent Rear wing Inserts

Serpent has released this pair of rear wing mount inserts for use with the 1/10th scale Protoform Stratus. Suitable for both the 190mm and 200mm body shells, the lightweight clear plexiglass inserts fit neatly into the wing mount towers and because they are threaded they replace the nuts that come as standard with the body. Once mounted they provide protection from the mounting screw being pulled through the body in the event of a crash. This not only prevents retirements due to the wing coming off but also saves you money, as the wing mounts are no longer destroyed.

Source: Serpent [serpent.com]

October 1, 2007

Xray Receiver Battery Pack

Xray have released this new 5-cell (6.0V) inline battery pack made from ultra-high performance Intellect IB1400mAh NiMH cells. These 2/3A cells offer low resistance and will maintain their high voltage under load, allowing them to easily provide power to high-powered servos without a performance decrease. The 1400mAh capacity is one of the highest capacities currently on the market, helping to ensure long life for long races while the pack features high-grade wiring and a pre-wired standard connector for connection to the receiver.

Source: Xray [teamxray.com]

October 1, 2007

Mark Green wins Rd10 of UK 1/8th Nats

The 10th and penultimate round of the British 1/8th scale Nationals were held at the weekend at the fast Halifax track in the North of England. Qualifying saw Serpent driver, and round 9 winner, Mark Green claim a close TQ ahead of team mate Tim Wood only 1 second behind, with another Serpent racer Richard Hicklin in 3rd. The start of the final saw Green lead away with Wood following very close behind until a broken piston ended his chances and allowed Hicklin up into 2nd position where he stayed for the rest of the race. Jason Frost moved into a podium position which he held for 20 minutes until a blown plug dropped down the order. Several big collisions mid pack involving Andy North and James Connolly meant that Mugen racer Andy Hastings came home third to collect his best result for over a year behind Hicklin in 2nd and Mark Green in 1st. This result meant that Mark Green claimed the 2007 National title ahead of Andy North in 2nd with 3rd position still up for grabs in the 11th and final round in Brooklands.

Thanks to Andy North for the report and photo.

September 30, 2007

2007 IFMAR 1/8th scale Worlds – Preview

2007 IFMAR 1/8th scale Worlds - Preview

Argentina is the host country for the 2007 IFMAR 1/8th scale World Championships and as the elite of the RC World descend on the country’s 2nd city, Cordoba, we bring you our event preview.

This year’s event takes place on a recently completed track at the Complejo Ferial Cordoba, the same venue as used by the Argentinean round of World Rally Championships. Favourite for this years event has to be the 7-time World Champion Lamberto Collari of Italy, the Kyosho driver will be trying to further cement his legendary RC status with an 8th IFMAR World title. Lamberto was present at the warm-up race in March but despite a good qualifying he had radio problems in the final, which meant he retired after only 50 laps, a problem I’m sure that will be sorted in time for this year’s main event.

Continue reading… content

September 30, 2007

Carson Vulcano V.28 Truggy

Carson have released the Vulcano V.28, a truggy based on their successful CY-buggy chassis. This strong and agile truck performs great on a wide variety of off road terrain thanks to its new suspension geometry, wide suspension arms and oversized multi-pin tires, which provide excellent drivability. The powerful Force 4.58 ccm big block motor combined with the supplied three-jaw racing clutch guarantees enormous acceleration and great top speeds. The Vulcano V.28 comes with the radio equipment pre installed and from the box it is ready-to-run in just a few minutes.

Click here for more information… content

September 30, 2007

Speed Passion Sport tuned Pro

Powers International have announced that they have started selling the new Sport tuned Pro motor from Speed Passion. This 15T brushless motor is suitable for stock touring car racing, Tamiya M chassis’ or even in drift cars and can be used with both sensored or sensorless ESC. This motor comes supplied with a sensor cable and can work with LRP BL speed controllers.

Source: Powers International [powers-international.com]

September 30, 2007

Naoto Matsukura wins Japanese 12th Nats

This weekend saw the 1/12th scale JMRCA Japanese Nationals take place at the Yatabe Arene indoor race track. Qualifying for this hotly contested race saw pole position go to young Yokomo driver, and 4wd off road WC finalist, Naoto Matsukura with 2006 National Champion Hideo Kitazawa in 2nd and Masami Hirosaka in 3rd. In the finals it was a complete dominance by Matsukura, winning all three 8 minute A-finals by a massive margin to claim his first National title ahead of 2nd place Hirosaka, while Kitazawa came home 3rd.

View reports from the race here, here and here.

Source: JMRCA [jmrca.com]