April 25, 2007

Sebastian Wartelle wins Rd1 of 2007 Belgian 200mm Nationals

Rd1 of 2007 Belgian 200mm Nationals

Last weekend saw the first round of the Belgian 200mm Nationals take place at the Roeselare track in Belgium, hosts of this years Euro B’s for 1/10th scale. The pace setter was French man Sebastian Wartelle driving for Kyosho who claimed pole position for the event ahead of Serpent driver Steven Cuypers in 2nd and Jerome Renaux in 3rd. In the race it was pretty much the same story with Wartelle, who also competes in the French Nationals, taking the win by a lap from Cuypers in 2nd, with Renaux finishing in 3rd 2 laps further back.

Click here to see the final results… content


April 25, 2007

Trinity Drake glow plugs

Trinity Drake glow plugs

The master of off road, Adam Drake, knows a thing or two about engines and so has released this new line of Glow Plugs for his Trinity Platinum Series engines. Available in both turbo and standard non turbo versions, they are only available in one heat type, but fit all engines and another thing is that they are not just sold as a single plug, but you can buy them in packs of 4, thus saving you money.

Source: XRC [rc411.com]


April 25, 2007

Morotech release options for RDX Phi

Morotech release options for RDX Phi

Japanese firm Morotech have today released these new items for use with the new Corally RDX Phi touring car. First up is this rather cool looking, and very light, carbon fiber tool to aid in the adjustment of the differentials on the Phi. The forks on the tool go into the drive cups on the diff and allow you to check if its slipping or not by allowing you to turn the pulley while both ends of the diff are held from rotating. The other piece from Morotech are these diff seal protectors that come in a pack of 8 and are available for the 42T and the 36T diff pulleys.

Source: Morotech [morotech.jp]


April 25, 2007

LRP Ceramic Bearings for Vector X-11

LRP Ceramic Bearings for Vector X-11

LRP have announced the release of these new ceramic bearings for the Vector X-11 brushless motor. Constructed using a precision made steel cage these new bearings are very druable and allow the motor to rev freer higher due to the reduced friction caused by the use of ceramic balls.

Source: LRP [lrp.cc]


April 25, 2007

Ronald Voelker wins German Indoor Nats

Ronald Völker wins German Indoor Nats

The race happened 2 weeks ago already but the results and pictures from the 2007 German Indoor Nationals have only come out now. The race took place at the permanent indoor track, Hallenstrecke des Megadroms Geilenkirchen, and was open to both standard and modified classes. In the Modified class it was Ronald Voelker that took the dominant win, driving his Hot Bodies Cyclone, while 2nd position went to Xray racer Steven Weiss with 3rd position falling to the young Kyosho driver Christopher Krapp. In the standard class it was Heinz-Jurgen Kalinowski that took the win, taking 2 final wins to finish ahead of 2nd placed Patrick Pasch with 3rd spot going to to Dominik Reschke.

Click here for the top 10 results from both classes… content


April 25, 2007

Gerd Strenge – Official Statement

The Real Durango

We have been contacted by Gerd Strenge, designer of the Durango 4wd electric buggy, to make a statement regarding some very disturbing news about, what basically amounts to theft by Belgian firm Aero Racing. As some of you may be aware, 2 weekends ago was the first race of the UK Nationals for off road and at that event a new firm was present called Aero Racing, claiming to have produced a new car called the A-One which was ‘based’ on the Durango, and they also claimed to have bought the full concept from Mr Strenge. This turns out to be a complete lie and, despite contact with Aero Racing by Gerd, they continue to use Gerds name and the Durango name to promote this rip off.

The text above is the opinion of Red RC, not that of Gerd Strenge.

Click here to read the full statement from Gerd Strenge… content


April 24, 2007

OCM Racing Kaos DT-19T truggy

OCM Racing Kaos DT-19T Truggy
^ Click for larger image

A long time back, we showed you some CAD images of the new Kaos DT-19T truggy from OCM Racing, which at the time was still a concept on a computer screen. Well as you can see in the picture above the truggy is now real and judging by the picture it looks pretty good. No other details have been announced but to have a closer look and judge for yourself click the image.

UPDATE: Rube Dude have some pictures of the truggy in action, which you can view here.

Source: OCM Racing [ocmracing.com]


April 24, 2007

Hot Bodies Cyclone D4 optional parts

Hot Bodies Cyclone D4

HPI / Hot Bodies will start shipping a whole lot of new optional parts for their 4wd electric buggy, the Cyclone D4. Some new parts offer new tuning possibilites such as the new rear side suspension blocks that now come in 2.0 and 2.5 degrees of toe-in, in place of the standard 3.0 degrees that comes with the car. Other tuning parts are the new purple anodised rear hubs that offer now 0.5 and 1.0 degree of toe-in as well as adding strength to the area due to the use of aluminium. Also available are some new matched springs in different ratings, aluminium wheel hubs for extra strength and reduced flex, a front one way shaft and finally just for looks are some new flourescent yellow wheels.

Click here to see pictures of the new optionals… content