Red RC » News

December 11, 2020

Muchmore alu turbo cooling fans for motor & ESC

Two new aluminium turbo cooling fans from Muchmore for the motor and ESC. The cooling fans are available in 30mm and 40mm version and both feature a machined aluminium outer shroud and both come supplied with a fan mount to easily attach the fan to your car’s chassis plate. The 30mm version comes with a standard ESC plug but also includes an extension cable with JR type connector to connect to your ESC while the 40mm version comes standard with a JR type plug.

Source: Muchmore [muchmoreracing.net]

December 11, 2020

Team Powers Mini-spec Radon ESC

From Team Powers comes their new smaller Mini-spec Radon speed control. Approximately 30% smaller than the standard Radon Series Speed control it is compatible with Radon series speed control firmware. Supporting Ch3/Ch4 Aux Input signal to control different item function values, this can be set directly from the LCD card. Comes supplied with 14AWG high density copper soft wire.

View more details here

December 11, 2020

Smokem Racing R12 roll centre shim sets

Smokem Racing introduce their new carbon fibre roll centre shim sets for the ARC R12. Available in 1.0mm and 1.5mm versions, the shims are used to raise the R12 suspension arm mounts, allowing roll centres to be raised in larger increments without stacking multiple shims. Raising the roll centre releases the car from excessive grip through a corner, allowing for improved flow and corner speed. Features a unique design that allows the same shim to be used under all 1-piece toe blocks.

View the full shim set here

December 11, 2020

RPM X-Maxx oversized front axle carriers

RPM have introduced these new oversized front axle carriers for the Traxxas X-Maxx. Replacing the stock part and bearings (20x27x4mm), they come with much larger 20x32x7mm inner bearings and the carrier sorts massive steering support ribs for the strongest possible carriers. The outer bearings remain the same as stock and are not included. Sold as a pair.

Source: RPM [rpmrcproducts.com]

December 11, 2020

Yeah Racing Mini-Z tool kit

From Yeah Racing, this tool set is perfect for those upgrading and/or rebuilding their Mini-Z. Supplied with all the required sizes of Phillips head (00, 0 & 1), nut drivers (3.5mm, 4mm, & 4.5mm) and a 1.5mm hex driver, they come in a handy carry case with elasticated loops. The tools themselves sport neat spiral knurled black anodised aluminium handles while the specially treated tool steel tips offer exceptional life.

View the carry case here

December 11, 2020

T-Works chassis balancing tool set

T-Works have released this chassis balancing tool set. Designed to fit any chassis with pre-drilled balancing holes in the front and rear, they help to achieve perfect left-to-right chassis balance. The stands are machined from aluminium, they feature a black surface coating and are further machined to reduce weight, with the pins made from steel. Sold as a pair they come in a foam lined plastic case.

Source: T-Works [rc-tworks.com]

December 11, 2020

Factory Pro RC T4’21 body stop system

Factory Pro RC have released this body stop system for the Xray T4’21. Very similar to the stock part, it is mounted to the c-hub and the carbon plates height are height adjustable. However the these versions are topped off with a much larger volume top header with foam pad to give the body shell maximum support and reduced damage at the point of contact. Supplied with two pairs of headers, two carbon plates and large foam pads.

View the set here

December 11, 2020

XactRC IRx charge leads

XactRC’s new IRx charge lead is a 2-foot long 2S charge lead that is a must for those looking for low IR’s when charging. Using the highest quality bullets & plugs and high strand tinned copper wire that has the best performance over time compared to a bare copper wire that will degrade, it features a very flexible silicone tubing over the wire, black XH balance plug and a waterproof shrink wrapped balance plug for increased strength when plugging into your battery. It has been finished off with a black nylon mesh for each wire and centre of the lead which is finished off with their printed XactRC logo to hold it together. A great product to help you get the edge out of your batteries and will last to rigorous charging cycles. Available in two versions, one with 5mm & 4mm bullet connectors and one with 5mm bullets & XT60 plug.

View the bullet only version here