November 7, 2024

Infinity IFB8 Lightweight optionals

Infinity has released two lightweight optionals for their IFB8 1:8 Nitro Buggy.  Machined from 7075-T6 alloy and featuring a hard coating, the CVA Cup Shaft lightweight design make them 4.3 grams compared to the steel version’s 8.3 grams allowing you to save weight and achieve maximum performance.  It can also be installed on the rear hub providing additional support, which is recommended for high-grip and fast tracks.  Also made from 7075-T6 alloy, lightweight Diff Cross Shafts each weigh 0.65 grams allowing you to cut weight from your transmission and achieve maximum performance.  It can be installed on all the differentials of your vehicle.

View Diff Cross Shafts here


November 7, 2024

Coelho tops opening seeding round in Bakersfield

As things start to get official here at the IFMAR ISTC World Championships in Bakersfield, California, it was Bruno Coelho who set the pace in the first of the 3 seeding rounds, the reigning World Champion’s closest challenger continuing to be Michal Orlowski.  With yesterday’s wind having died down and the morning sun bringing some extra temperature, drivers posted their fastest laps of the event so far around the Finishline RC Raceway with Coelho’s advantage over 3-consecutive laps 1/10th of a second on Orlowski.  Behind them it was Warm-up Race winner Akio Sobue who was 3rd fastest ahead of Marc Rheinard with Infinity’s Jin Sawada and Schumacher’s Mattia Collina completing the Top 6.

Continue reading here


November 7, 2024

SMJ Revolution Ultra Bearing Lubricant

New from Japan’s SMJ, ‘Revolution’ bearing lubes were developed to achieve the ultimate in low friction. By using it on degreased bearings, you will experience unprecedented lightness of rotation.  Recommended not only for RC cars but also for mini 4WD.  The bottle’s steel applicator tip ensures precision application of the oil.

Source: SMJ [smj-rc.com]


November 7, 2024

Willspeed LD3 30T PEEK Idler Gear

Following on from the release of their PEEK idler gears for the Team Associated B7, 1:10 offroad specialist manufacturer Willspeed has released this machined 30T PEEK Idler Gear for the Schumacher LD3 2WD Buggy.  PEEK (polyetheretherketone) is a premium high performance engineering plastic and boasts excellent mechanical strength, heat and wear resistance and bearing properties, the highest rated among plastics making these gears truly a fit and forget item.

Source: Willspeed [willspeed.co.uk]


November 7, 2024

Ronnefalk confirmed for SIGP International Offroad GP

The organisers of the SIGP International Offroad GP in Xiamen, China, have announced David Ronnefalk as the latest driver who will compete for a share of the race’s total prize money of almost $25,000.  The Xray driver & 2016 1:8 Buggy World Champion is the third World Champion winner to be confirmed for the December 11-15 race with Team Associated’s Davide Ongaro and Xray’s Bruno Coelho having already been announced to race at the 3-circle ARC International RC Racing Track.  The same venue that hosted the 2017 IFMAR 1:10 Electric Offroad World Championships, the race schedule will be made up of 5 classes including racing for 1:4 offroad bikes with the main action expected in 1:8 Nitro Buggy and 1:8 eBuggy.  Red RC will be travelling to the SIGP for the post Covid return of the event to the international race calendar.

Source: Sunpadow [sunpadow.com]


November 7, 2024

Coelho from Orlowski as free practice concludes at WC

Day 1 of the action at the IFMAR Touring Car World Championships in California has concluded with Bruno Coelho setting the pace from arch rival Michal Orlowski.  With 5-rounds of free practice making up the day’s action it was Coelho’s Xray that would set the fastest time in all but 1 round, the Schumacher of Orlowski the only other driver to top the time sheets when he set the fastest 3-consecutive laps in FP4 by just 0.009 of a second from Coelho.  With FP5 proving the fastest run of the day, it would be Marc Rheinard’s Awesomatix that would end up third quickest for the day ahead of Alexander Hagberg’s Xray with Axon’s Akio Sobue and Mugen Seiki’s Ronald Volker completing the Top 6 times on a windy day at the Finishline RC Raceway track.

Continue reading here


November 6, 2024

Practice underway at Worlds, Coelho sets early pace

After of months of preparations & testing by manufacturer & drivers, the IFMAR 1:10 Electric Touring Car World Championships are finally underway in California with defending champion Bruno Coelho setting the early pace at Finishline RC Raceway.  With 5 rounds of practice on today’s schedule the biggest take after the opening two rounds of practice was grip, or more specifically the lack of it, the track completely different to what drivers had expected after previous visits to the track.  With the first practice round very much a systems check for drivers, issues with noise on the timing loop caused by a 7000 volt electric fence resulted in over an hour of a delay before drivers resumed with the second practice run.  With Coelho’s Xray fastest in both rounds, his 3-consecutive laps of the second practice a 33.146, it was Worlds Warm-up Race winner Akio Sobue who was closest on pace running a best time of 33.379 with Axon team-mate Hayato Ishioka completing the Top 3.  One of the favourites coming into this World Championship Schumacher’s Michal Orlowski set the fourth fastest pace ahead of Mugen’s Ronald Volker, Xray’s Alexander Hagberg and the Awesomatix of Marc Rheinard.

Continue reading here


November 6, 2024

Team Associated RC10 40th Anniversary Green Edition

Continuing with the celebrations of their 60th anniversary, Team Associated has released the RC10 Green 40th Anniversary Edition kit.  An alternate reproduction of Roger Curtis’s world championship-winning buggy design that changed the world of RC off road racing forever.  The RC10 (RC coming from Roger’s initials) started as the vision of the Team Associated founder and became one of the most iconic RC cars in history.  The RC10 Classic range features fully adjustable four-wheel independent suspension, an aluminium alloy monocoque tub and race-proven hardware throughout. Strength and durability are standard equipment.  For maximum traction, the RC10 suspension is damped by long throw, fluid-filled racing shocks, using machined alloy cylinders and drill blank shafts for silky smooth action.

View more images here