Red RC » P On Road

December 6, 2013

3Racing Sakura FF2014 FWD touring car

Sakura FF2014 FWD touring car

3Racing introduce the limited edition FF2014 front wheel drive touring car. The completely redesigned kit only shares a minimum of parts with its predecessor and features a new chassis design for optimised flex, a new quick release system for the differential, new high-graphite suspension parts all round, front and rear carbon fibre shock towers with new suspension geometry as well as a new dual bellcrank steering system. The kit comes fully ball raced, allows for four different battery positions and includes ball cups made from a new, stronger material. Also part of the package are several option parts such as Factory Racing Team shocks and gear differential, 1-piece 7075 servo mount, front and rear anti-roll bars, pink-colour aluminium screws, hardened 7075 alloy idler gears and aluminium arm mounts. Shipping of the kit, that won the FWD class at the recent Japan round of the Asia Onroad Championship in the hands of JJ Wang, will start on the 23rd of December.

Click here to continue reading

December 5, 2013

Mon-Tech Racing F13 formula 1 bodyshell

Mon-Tech Racing introduce their latest formula 1 bodyshell, called the F13. Moulded in 0.75mm high quality polycarbonate the 1-piece body comes including a driver helmet, rear diffuser and decal sheet and it is made to fit most of today’s F1 chassis.

Source: Mon-Tech [mon-techracing.net]

December 5, 2013

Serpent Viper 977 aluminium pulleys

New from Serpent comes a variety of aluminium belt pulleys for the Viper 977. Available are 19T and 21T layshaft, 18T and 25T middle, 28T front and 48T rear pulleys as well as 19T and 21T lightweight pulley adapters. All parts are CNC-machined from high-quality aluminium with the side pulley shims offering openings to let dust and debris escape the pulley and belt area for improved durability and efficiency.

Click here to view the other new parts

December 5, 2013

Yuki Model Samurai 45A brushless ESC

New from CN Development & Media comes the sensorless Samurai 1/10 BL/SL 45A brushless speed controller. Measuring 45x32x37mm the 2S to 3S LiPo compatible ESC features a 2A/6V switched BEC system, splash waterproof protection and it comes pre-soldered with 4mm gold-plated connectors for the motor. The controller is available separately or as combo set including a 3450kv motor and programming card.

Click here to view the combo set

December 5, 2013

Tamiya TT-02 Alfa 155 & TT-02D drift kit

Tamiya introduce two new kits based on their TT-02 entry-level 4WD touring car. First up is the Alfa Romeo 155 V6 TI, the kit resembles the Jägermeister car that was run in the 1994 German Touring Car Championship. The kit builds on a plastic tub chassis with 4WD shaft transmission, gear differentials and in-line motor position. The highly detailed body comes with a separate rear wing and a large decal sheet while the wheels are OZ replicas with grippy slick tyres. The second new kit is the TT-02D drift chassis. It builds on the standard TT-02 and includes ball bearings, a special battery hold-down, aluminium motor heatsink, oil-filled shock absorbers and drift-spec tyres and wheels. Coming without a bodyshell nearly all 190mm and 200mm bodies should fit. Both cars will become available beginning of 2014.

Click here to view the drift chassis

December 5, 2013

McPappy Racing McDominator Adam Liehr Edition

McPappy Racing has just released the latest McDominator in the Adam Liehr Edition. This chassis was designed for the use with the Savox SH-1250MG servo using the optionally available McPappy Savox servo case that is flush with the bottom of the chassis. Dropping it this low completely solves bumpsteer while running a flat servo plus it also lowers the centre of gravity. Since there is only a single 10″ wheelbase option, McPappy stretched the chassis right up to the LF wheel which allows another half piece of tungsten to adjust weight bias making it the chassis with the most tungsten options.

Click here to view more photos

December 4, 2013

Serpent J191 Formula 1 bodyshell

Serpent introduce the J191 bodyshell for 1/10 formula 1 chassis. The body is made from clear polycarbonate and is modelled after the Jordan 191 F1 without going too much into detail. Made for Serpent’s F110 chassis the body should fit a wide range of other cars too. Included with the 191, that is useable with both lexan and solid plastic front wings, are three different driver helmets.

Source: Serpent [serpent.com]

December 4, 2013

Jabber 1/5th scale electric on-road bike

Clark’s introduce the Jabber 2011 World Championship replica electric on-road bike kit. The winning bike of the 2011 Worlds and 2013 Worlds warm-up winner is constructed from high-quality carbon fibre and aluminium parts and designed by former (RC) Superbike World Champion Edi Winter. The kit, that will come as rolling chassis, is now available for pre-order with shipping being expected to start end of January 2014.

Click here to view more images