Red RC » P On Road

October 1, 2013

Team Magic E4JS II club-level racer

Team Magic introduce the E4JS II club-level electric touring car kit. The car is based on the E4RS II and E4RS II Evo and is designed to create a cost-efficient platform for part time and club-level racers. Sharing many parts and also the suspension geometry with the latest Evo kit, the JS II builds on a 2.3mm ‘Eco Graphite’ double deck chassis with hard compound plastic front, middle and rear bulkheads combined with a metal motor mount. The drivetrain is equipped with gear differentials and universal driveshafts as well as an aluminium main gear holder. Other features include hard material suspension parts, composite/aluminium shock absorbers, carbon fibre shock towers and the possibly to take influence on the flex characteristics of the chassis courtesy of three different mounting points for chassis braces and linkages. The kit will become available by October.

Click here to view more photos

September 29, 2013

O.S. Speed R2101 .21 on-road engine

O.S. Engine introduce the O.S. Speed R2101 .21 on-road engine. Building on the winning heritage of the 21ZX-R the newly developed engine is of a 7+3 port design, and comes with a redesigned liner and piston for improved fuel economy, a new crankshaft and a new cooling head. A pre-production version of the engine was used by Mugen’s Takaaki Shimo to win the Pre-Worlds race back in May with the actual production engine will be used by the O.S. team at the upcoming Worlds next month.

Click here to view the specifications

September 27, 2013

Schumacher Mi5 stiff chassis & Ti balls

Schumacher have new optional parts for the Mi5 touring car available in the form of a 2mm stiff weave chassis and Core RC titanium pivot balls. Starting with the chassis, the part is stiffer than the stock kit chassis and ideal when racing in high grip conditions. It also scrubs around 10g of weight while lowering the car’s centre of gravity at the same time. The second new part is a 22 piece titanium ball set, again for the Mi5. The parts significantly reduce the weight of the car and are super tough allowing to use them over a long time without having to fear wear and tear.

Click here to view the titanium balls

September 27, 2013

LRP VTEC G36 pre-glued asphalt tyres

LRP introduce the VTEC G36 asphalt tyre. Building on the experience gained with the 30X tyre the G36 is made from a new rubber compound for improved traction and maximum durability. It is designed for racing at high asphalt temperatures and comes pre-glued on a redesigned, impact-resistant and true running rim with LRP’s white insert.

Source: LRP [lrp.cc]

September 26, 2013

Shepherd Velox V10 clutch updates

Shepherd announce an update to some of their clutch parts for the Velox V10 200mm kit as well as a new tuning clutch bell. The updated flywheel #410401 is made from high-quality 7075 T6 black anodised aluminium now comes in a much lighter and smaller design for less rotating mass. Also the standard clutchbell now features an updated design with smaller tolerances for even better fitting and ultra true running of the bearings and the pinions. New is also a tuning aluminium clutch bell made from high-quality 7075-T6 aluminium and hardcoated for maximum durability and extra long life. In combination with the new flywheel the weight saving is about 35 percent compared to the previous version of the clutch.

Source: Shepherd [team-shepherd.com]

September 26, 2013

Tekin RSX brushless speed controller

Tekin introduce the RSX competition brushless speed controller. The compact unit is designed for the use with 2S to 3S LiPo battery packs and it offers a billet aluminium heatsink housing, an optional fan shroud system and a highspeed fan for maximum cooling. The controller is compatible with sensored and sensorless motors, offers easy on-board programming and an adjustable high voltage BEC system with 6V to 7.4V output. Sporting an 180A rating the RSX is good for the use with motors as low as 2.5T with 2S batteries and 8.5T motors with 3S packs.

Click here to view the specifications and features

September 26, 2013

Xray X12 pan car kit

Xray introduce the all-new X12 1/12th scale pan car kit. Building on the experience gained with the X11 the new kit features a redesigned narrow main chassis, narrow rear pod, an all-new centralised shock mounting position and many other refinements such as a new front suspension including redesigned front arms. The new chassis allows to mount the battery in an off-set in-line or traversal placement while the narrow design with more centrally mounted rear pod links makes for a more agile handling and improved side-to-side weight transition. The new longer upper pod plate results in a more progressive damping to improve forward traction and handling over bumps. Also part of the new rear end setup are straight-type side springs for a smoother and more consistent compression. Up front inserts for the lower arm mounts allow track width adjustment in 0.5mm increments while 0.2mm to 0.6mm ride height spacers help you to fine tune the ride height for a variety of tyre diameters. Other front end features include easy-to-tune reactive castor and Ackermann settings. As usual the kit comes without body, tyres or electronics.

Click here to view the features and more photos

September 25, 2013

Yokomo announce new brushless controllers

Yokomo introduce three new brushless speed controllers in the form of the BL-SP3, BL-RS3 +Turbo and the BL-Pro3 +Turbo. While the SP3 with its 8.5T motor limit is more of an intermediate level offering both the RS3 +Turbo and the Pro3 +Turbo are pure competition speedos. The latter two offer an aluminium heatsink case, they are widely adjustable using Yokomo’s optional programming box and it is understood that they offer both a zero timing and a turbo mode making them ideal for blinky, boosted and modified racing alike. All three speed controllers will become available in October and details on specifications and features will be available shortly.

Source: Yokomo [teamyokomo.com]