May 19, 2023

Raceform Bling Series Colorway Lazer Car Stand

Singapore’s Raceform has added a new Bling Series Colorway Lazer Stand to its range of racing accessories.  Made from the most premium plexiglass in the industry, the latest Bling Colorway with the highest Hologram Glitter count in the market will definitely attract attention on your pit table. The carefully designed futuristic Lazer Car Stand now features detachable sides for ease of space to fit into your race luggage. EVA foams padding on the top and bottom of car stands to prevent slippage and also protects scratches from sandy under-chassis. Flip the stand up for shock building – one side for 1:10 scale and the other side for 1:8 scale for medium and large car stand. The Stand is design to fit even the longest shock length in the market and is available in 3 sizes – Small (190mm x 115mm x 33mm(H)) for 1:12 and 1:10 On Road, Medium (190mm x 115mm x 48mm(H)) for 1:10 Off Road and Large (190mm x 115mm x 90mm(H)) for 1:8 Offroad.

View more images here


May 18, 2023

SMJ ‘Black’ Battery Weight Plate 30g

New from SMJ is this black version of it very popular 30g Battery Weight Plate intended for 1:10 electric touring car.  Made in Japan and just 0.6mm thick, the plate has been a time long time seller for Speedmaster Japan who have decided to give it a new look and remodel in a new black colour.

Source: SMJ [smj-rc.com]


May 18, 2023

JConcepts Finish Line radio bag

JConcepts has released its own Finish Line radio bag to provide protection for one of the single most expensive purchases in RC.  In many instances, radios are abused during racing conditions and not properly stored when they are inactive.  Storage choices for radios are quite slim and once priced and evaluated, some racers prefer not to have them simply because they do not travel very well in their luggage or typical race gear.  The new Finish Line radio carrier with outer woven fabric gives it a very luxurious look at first glance, however, the handy new item is designed with travel, cushion, ease of use and protection in mind.  The lightweight design consists of a woven fabric outer bag which has a convenient and easy access zipper closure and inside has a Velcro closure pouch for additional easy access items.  Inside, a high-density, form fitted foam, pre-cut to specific models cushions all sides of your pricey possession.  The bag can be ordered for the Futaba T10PX, Futaba T4PM or Sanwa MX6.

Source: JConcepts [jconcepts.net]


May 17, 2023

Serpent Viper 990e 1:8 Electric Onroad

Serpent has announced the release of the Viper 990E, the successor to their successful 988E/989E 1:8 Electric Onroad chassis.  Following extensive testing and research to improve the former electric powered 1:8 platforms, designer Michael Salven has put a lot of emphasis on the flex characteristic since that showed very promising results.  On top of that Serpent have improved weight, weight distribution and ease of maintenance with a a lot of the development also going into the transmission.  The goal was to have a bullet-proved, yet very free transmission. Some key features of the 990E are an ultra-narrow chassis that is milled down to allow the lowest possible mounting of the batteries plate as well as improving the overall flex characteristics.  The central part of the chassis features 3 NACA ducts for the cooling of the speedo as well as the motor.  The motor has been put as low as possible by machining the chassis underneath it. This improves the centre of gravity as well as the cooling from the bottom.

View more images here


May 16, 2023

MIBO Racing Tire Sander

MIBO has added this Racing Tire Sander to its range of racing accessories.  A must-have tool for every onroad racing driver to prepare their tyres for optimal performance on the track, it makes removing mold lines from new tires quick and easy, allowing you to skip several laps of wear-in time.  It is designed for use with files or sanding papers, available in various grit options.  The rotation speed helps to effectively and evenly remove the mold lines, ensuring a smooth tyre surface.  This way your tyres can provide better traction and consistent handling right from the start, allowing you to focus on achieving faster lap times.

Continue reading & view more images here


May 16, 2023

T-Works Ni-Cd Glow Plug Igniter

T-Works has a new Ni-Cd Glow Plug Igniter that use a SC2000mAh 1.2V Nickel-Cadmium battery.  The advantage of nickel-cadmium battery is that the power will not be lost when not in use.  The front end is made of steel and high quality copper parts and it is equipped with plastic cover to prevent short circuit when not in use/or storage.

Source: T-Works [rc-tworks.com]


May 16, 2023

PowerHD S15-Y Servo for Yokomo BD12

Power HD have announced the release of their Yokomo BD12 electric touring car specific servo S15-Y.  With the integrated CNC mount, this S15-Y can be directly mounted to the Yokomo BD12, perfectly matching the original servo mount screw hole.  The reverse receiver wire output offer neater wiring for the BD12 and contribute to lower centre of gravity.  Having the same superior performance just like S15, the S15-Y can be programmed with Power HD program box, to set your favourite parameter according to the different tracks.  The S15-Y is compatible with the Yokomo BD12 and BD11.

View features & specs here


May 16, 2023

Mugen MRX6X Optional Rear Shock Tower

Reigning 1:8 Onroad World Champion manufacturer Mugen Seiki has released a new optional rear shock tower for their MRX6X chassis.  The new carbon fibre rear tower gets an added the hole in the middle and further two top holes from the standard shock mounting holes.  This will create more fine tuning for rear shock angle with the added top two holes creating more rear traction on tracks with low grip condition.

View tower unmounted here