Red RC » P On Road

June 4, 2012

Associated TC6.1 one way

Associated have released a TC6.1 and TC6 front oneway for high-grip conditions. Designed to ensure that both front wheels maintain maximum speed by letting the inside wheel turn slower than the outside wheel, which allows more consistency through a corner. As a plus, under deceleration, the front wheels are disconnected from the drivetrain, allowing their traction to be used solely for turning (and not driving), which gives more steering.

Source: Associated [teamassociated.com]

June 2, 2012

KM H-K1 EvoII drivetrain upgrade parts

KM Racing release new optional parts for the H-K1 EvoII 200mm nitro on-road chassis. Available are a new front differential case, 24T front belt pulley and a 5mm wide front belt. All three parts are designed to be used together with the pulley being designed for the use with the new 5mm belt and also featuring a reinforced side where the screws attach. The new parts make for a more reliable and better performing drivetrain.

Click here to view more images

June 1, 2012

VP Pro turbo glow plugs

VP Pro introduce their new line of glow plugs for nitro engines that make use of turbo type plugs. Available are an ultra hot P3 and a slightly colder P8 type, both of which make use of a high-quality platinum coil to give maximum consistency while the nickel treated body prevents oxidation to increase durability.

Source: VP Pro [vp-racing.com]

May 31, 2012

SpeedMerchant pan car steering blocks

SpeedMerchant introduce their new pan car steering blocks for all on-road chassis with standard 1/8″ king pin. They sport the same geometry as company’s delrin blocks and are slightly lower in height than most of the available blocks for more variety in ride height and roll centre adjustments. Additionally the 4.40 ball stud is moved away from the king pin for more Ackermann options while a different axle trail takes away a bit of the twitchiness around the centre of the steering. They are designed for the use with SpeedMerchant’s machined front axles, come with 4-40 set screws and are available in black or blue anodising.

Click here to view more photos

May 31, 2012

Boss Z7 Nds-Tech tuned engine

The Boss Z7 7-port on-road engine is hand-tuned and assembled by Nds-Tech and features a coated crankcase, hand-tuned ABC liner and specially treated backplate to increase the overall performance of this 3.5cc on-road engine. Other features of the Z7 include a crankshaft with silicone insert and two Swiss-made ball bearings with the rear one being a ceramic type.

Source: Boss Engines [boss-engines.com]

May 30, 2012

Edam 48P pinion gears

Edam have released a complete range of 5mm 48 pitch pinion gears for their Espirit 1/10th electric chassis. Available from 24T to 33T, they are made from steel and give the user the possibility to gear their car to be able to use up to a 550 motor and 3-cell LiPo.

Source: Edam [edamhobby.com]

May 30, 2012

KM H-K1 rear shock tower

KM have released an updated version of their H-K1 rear shock tower. Again made from 4mm carbon fibre, the new design is ready for mounting the soon to be released rear plastic body supports.

Source: KM [km-rc.com]

May 29, 2012

VBC Racing Wildfire 1/10 4wd touring car

VBC Racing have introduced their first 1/10 4wd touring car designed for competition called the Wildfire. The car has been developed from the ground up and all parts are designed with only one thing in mind, ‘Fast’. VBC put in months of intensive testing with drivers all around the globe on carpet and asphalt surfaces, even testing the car in highly competitive national and international races around the world to gather valuable data to help fine tune the car.

View more details and images here