Red RC » P On Road

March 23, 2012

Kyosho R4 option parts

Kyosho release new option parts for the 1/10 nitro touring car V-One R4. Available are a black anodised aluminium break lever sporting a laser engraved logo and designed to allow for higher brake forces and more accuracy. Also new is a 2-speed housing with integrated ball bearing for more precision of the gear box assembly and a smoother engaging point of the 2-speed shoes. Furthermore there are the front upper arm mounts available machined from black anodised aluminium. The parts offer higher rigidity and less flex for the front upper arms.

Click here to view the other new parts

March 23, 2012

Kyosho DRX VE 1/9 scale rally car

Kyosho introduce the DRX VE 1/9 scale electric rally cars with 4WD drive train, and ReadySet specifications. The car comes ready-to-run and features an aluminium chassis plate, equal design front and rear suspension, as well as 2.4GHz radio set and genuine Team Orion Vortex 10 2400kv brushless motor and Vortex R10 Sport controller. The DRX VE is available with Subaru Impreza or Ford Fiesta rally car body shell.

Click here to view more photos

March 23, 2012

Robitronic Powerswitch

Robitronic release the Powerswitch, an electric switch for nitro and gas-powered vehicles. The device replaces the mechanical on/off switch with a dust and water-protected solution that also allows to monitor the receiver battery. Programmable for 2S LiPo, 2S LiFe and 5 cell NiMH packs the switch recognises a low receiver battery voltage and poor connector contact and warn the pilot. The switch is high voltage compatible and good for the use with up to three servos or 10A peak current.

Source: Robitronic [robitronic.com]

March 23, 2012

KM H-K1 EvoII 3mm carbon chassis

KM Racing release two new optional chassis for the H-K1 EvoII 200mm nitro on-road car. Available as standard and short wheelbase variant the chassis are cut from 3mm carbon fibre and are around 52g lighter than the stock aluminium chassis. The chamfered chassis edges allow for better ground clearance in corners with the standard version making the car more stable on the straights and the short version increasing agility in corners. The chassis must be used with the receiver battery mounted on the side and are ideal for outlaw club races and small tracks.

Click here to view the short chassis

March 23, 2012

Serpent Cobra GT release date

Serpent have finalised their new Cobra GT 1/8 scale nitro on-road car and will have the kit available by May. The Billy Easton designed GT car makes use of 3.5cc on-road engines and sports many parts carried over from the Cobra off-road platform. Included in the kit will be a 2-speed SL8 gear box, 4-shoe competition clutch system, front and rear gear differentials and strong, highly adjustable body mounts to make use of most of today’s GT style body shells. Other features are a large front foam bumper and a low CG optimised radio tray.

Click here to view another photo

March 23, 2012

LRP Power Supply & 55C LiPo batteries

LRP introduce the new Powersupply Competition 13.8V/20A as well as 55C Car Line LiPo batteries. The power supply features dual output sockets, works with 110V and 230V input and deliveres 13.8V and a maximum of 20A to power chargers, dischargers and any other device that makes use of 12V input. Additionally a 5V/1A USB charge output is integrated to charge electronics devices such as mobile phones.

Click here for more information

March 21, 2012

Serpent 411-FF pinions & 411 anti-roll bars

Serpent introduce new option parts for the 411-FF 1/10 scale FWD touring car in the form of large 48dp pinion gears and optional anti-roll bars for the 411 4WD TC. The Pinions are available as 61T to 63T types, are precision machined and sport a wear-resistant hard coating and laser-etched markings. Made for the use with the 411 electric sedan are the new longer anti-roll bar wires that allow the use of the front side mounting point of the rear wishbones. They are available as 1.2mm, 1.4mm, 1.6mm and 1.8mm variant are sport markings for easy recognition.

Click here to view more photos

March 21, 2012

Sonic ProStock.21 on-road engine

Sonic introduce the ProStock.21 3.5cc on-road engine. Designed especially for club and regional racers the 5-port engine is easy to tune and features a CNC-machined flat piston, optimised crankcase, knife edged connecting rod and turbo combustion camber insert. Other features include a 14mm high-quality main bearing, composite material carburettor with 8mm venturi insert, and lightweight cooling head. Additionally the engine is legal for the Hobby Cup racing series in Germany with more then 20 races all over the country.

Click here to view more details