November 29, 2011

KM Racing MTX5 rear shock tower

KM Racing MTX5 rear shock tower

KM Racing have introduced more new parts for the MTX5 with the release of this new rear shock tower. Made from a thicker 4mm carbon fibre, its construction is much stronger than the original kit part, yet remains lightweight thanks to the material used and strategic machining of the surface.

Source: KM Racing [km-rc.com]


November 28, 2011

McPappy Racing lightweight body posts

McPappy Racing lightweight body posts

From McPappy Racing these ultra lightweight adjustable body posts are half the weight of their competitors. There is about four times the normal machining involved to allow for a very lightweight design. The elliptical design provides a varied exterior wall thickness to lighten the side walls and they even machined a large hole in the middle for extra weight reduction. There are two set screws instead of one which is nice in case you strip one out or want to come in from a different angle. The typical threaded hole in the bottom allows you to mount it traditionally to any flat surface like the chassis or bumper. There is also two threaded side holes which will allow you to mount to any perpendicular surface like a cross brace.  This allows you to not only adjust the body post height up and down, but also side to side. The posts offer 0.40″ of height adjustability and the kit includes rough cut 3″ Delrin rods that you can cut to size. Available in anodized Beryllium orange or plain aluminium.

View more images of the posts here


November 28, 2011

Reds Racing M7T V1.1 engine

Reds Racing M7T V1.1 engine

Reds Racing have introduced an update to their M7T 1/8 on road engine, the V1.1. The new features include a carburetor update with shorter throttle to fit all new 1/8th scale cars and new minimum speed needle design that increases carburation precision. The crankcase has also been updated with new CNC machining around the mounts for easy installation into the car.

View the carburetor updates here


November 28, 2011

Xray solid axle driveshaft adapters

Xray solid axle driveshaft adapters

New from Xray are these driveshaft adapters for the front solid axle. A direct replacement for the stock composite versions they have increased strength and lifespan. The modular design of the front solid axle allows for easy removal and servicing. Internal slots key to drive shaft pins require the use of driveshaft blades (included), enabling direct power transfer to the wheels and eliminating excess play between the outdrives and drive shafts. Sold as a pair.

Source: Xray [teamxray.com]


November 28, 2011

Team Titan Blitz Volt 190mm body

Team Titan Blitz Volt 190mm body

New from Team Titan, the Blitz Volt is designed for 1/10 190mm Touring cars. A design that creates lots of steering, it is very well balanced and is perfect for small and tight corners claiming to give you more speed then other bodies on the market. Following the Global body spec it is available in 0.8mm standard and 0.7mm lightweight versions. Supplied with window mask and high quality decals.

View another image of the shell here


November 27, 2011

Arrowmax RX8 upper arm holders

Arrowmax RX8 upper arm holders

Arrowmax have released new upper arm holders for the Xray RX8. Machined from 7075 T6 aluminium, for right and left, the lightweight design is stronger and much stiffer than the standard kit parts.

Source: Arrowmax [arrowmax-rc.com]


November 25, 2011

Brain Stuff tire additive applicator

Brain Stuff tire additive applicator

Capricorn have introduced their new Brain Stuff brand, dedicated to quality materials, technical solutions and R&D. Their first product is this tire additive applicator which helps apply the additive to the tires. An electric motor runs at a constant speed rotating the tires placed on the first axis and contact the other two tires which will run in the opposite direction. An adjustment on the two cams allow you to set the pressure between the tires and choose the type of additive penetration. Works with 1/8th and 1/10th tires.

View more images of the applicator here


November 24, 2011

Xray RX8 aluminum pulleys

Xray RX8 aluminum pulleys

Xray have released a complete set of aluminium drive pulleys for the RX8. CNC-machined from premium lightweight Swiss 7075 T6 aluminum, hard coated for extra durability and long lifespan and has been strategically lightened. Rotating mass is reduced without sacrificing strength or durability. Available in 18T side, 18T front, 28T front, 29T front and 20T rear centre, the 2 speed centre belt pulley is integrated with brake disk adapter and includes factory-pressed pins (non-replaceable). All pulleys come factory pre-assembled.

Source: Xray [teamxray.com]