Red RC » P On Road

June 21, 2011

STRC Slash 4×4 GT-8/rally cross conversion kit

We showed you first pictures of STRC’s GT-8 rally cross conversion kit for the Traxxas Slash 4×4 before and now it is here. Designed to keep the general layout of the Slash and retaining a certain ground clearance the converted truck is able to run both in the parking lot and backyard, given the correct tyre choice. Due to the lightweight design the GT-8 offers a huge weight saving compared to a converted 1/8 scale buggy as the STRC converted vehicle weights at around 2320g to 2440g depending on the battery whereas a converted buggy easily breaks the 3600g mark. The kit contains a CNC-machined aluminium HD front bumper, bumper posts, front and rear lower hinge-pin block, bumper/gearbox brace, 17mm wheel adapters and nuts, as well as a 3mm graphite upper bumper hold down plate as well as all needed screws and hardware. Additionally needed are 1/8 scale GT/Rally Cross tyres and a suitable body shell. The conversion kit is available in blue, gun metal, silver and red anodising. Also available is a graphite low profile front body mount for bodies that have a lower profile front nose. The plate drops the front body mounting height by 6mm and using Traxxas Rustler/Stampede battery hold down posts by more than 10mm.

–Click here to view more pictures

June 20, 2011

Serpent 966 front upper suspension conversion kit

Serpent release conversion set for the front upper suspension to enable a newly developed geometry package for the 966. It moves the inner pivot-point of the upper arm more towards the outside allowing for the use of a very short upper arm giving a better steering feeling and an even easier to control front end. Roll-centre spacers and Nylon inserts help to adjust the front end geometry depending on the track conditions.

Click here for a picture of the installed conversion kit

June 18, 2011

Pro-Line 2012 Ford Focus ST body

Pro-Line introduce the 2012 Ford Focus ST clear body for the Traxxas 1/16 rally chassis. Every detail was scaled down to give you the best looking rally car ever made. Whether you’re cruising down the street or tearing up the dirt your car will stand out from the crowd of stock bodies. Paint the body using your own custom paint scheme or use the colours of your favourite rally racer and pitch it sideways full throttle. Included are window masks and a sticker sheet including grille, lights and details.

Click here to view another picture

June 17, 2011

Robitronic body hole patches

Robitronic release body hole patches to strengthen weak body post drilling holes or to correct slightly misaligned break throughs. Made from transparent 0.7mm thick material and coming in a set of four adhesive Lexan patches with 5mm hole diameter and 6mm hole diameter.

Source: Robitonic [robitronic.com]

June 17, 2011

CSO RX8 double belt tensioner

CSO release another optional part for Xray’s RX8 1/8 scale on-road car, this time in the form of a double belt tensioner. Constructed from a 3mm carbon plate and designed for the use with two belt tensioning pressure pulleys the new design is more adjustable and features better anti-vibration characteristics.

Source: CSO [cso.com.hk]

June 17, 2011

Thunder Power Z3R-8 brushless motor

Thunder Power introduces the Z3R-8 brushless motor for 1/8 scale electric vehicles. The motors with a 4-pole Neodymium rotor offer a red anodised aluminium heat sink can with build-in cooling fins, plated copper solder tabs, fast-switching high-temp sensors and adjustable timing from 0 to 25 degrees. The front plate sports dual screw hole mounting pattern to allow for easy mounting in any 1/8 scale application. With a diameter of 42.1mm and a length of 69.2mm the motors weight around 323g and come with 1400, 1900, 2100 and 2400kv rating.

Click here to view another picture

June 16, 2011

SRC S733 upgrade chassis stiffener

SRC release an upgrade chassis stiffener set for the Serpent 733. Coming with an Ergal engine mount, updated radio plate mounts and a side carbon plate the set, which is distributed by 2-Speed, helps to decrease torsional flex of the chassis which can be useful in high grip track conditions.

Source: SRC [srcspecialparts.com]

June 16, 2011

Losi 8-in-1 locking hex wrench kit

This 8-in-1 tool set from Losi includes an anodised storage handle with seven different hex sizes of .050 in, 1/16 in, 1.5 mm, 5/64 in / 2.0 mm, 3/32 in, 3/32 in Ball End and 2.5 mm. The tips feature a lock over magnets ensuring a secure fit of the blades.

Source: Horizon Hobby [horizonhobby.com]