Red RC » P On Road

March 13, 2023

Ielasi Tuned EFRA 2185 Onroad Pipe

Ielasi Tuned has just released its new EFRA 2185 muffler for 1:8 Onroad. Compared to the previous model, like their Offroad equivalent, this is a completely new muffler made using molds designed by former World Champion Daniele Ielasi making the pipe exclusive to his Ielasi Tuned engine brand. Featuring an ‘Exclusive sound’, Ielasi claims the pipe which was tested by former World Champion Robert Pietsch has more power (+2/3kmh) while also providing excellent fuel consumption.

Source: Ielasi Tuned [ielasituned.com]

March 12, 2023

Xtreme Aerodynamics ‘Italia’ FWD Bodyshell

As part of two big releases Xtreme Aerodynamics has unveiled its ‘Italia’ 1:10 FWD bodyshell. While the Italian manufacturer gives little information on the new design, Monaco RC says that after the success of the 2021 released She-Rock, which was banned from some European racing circuits but still dominates in Asia, the development team decided to create a new model that is EFRA-approved and has amazing performance. They say the feedback so far has been very positive but add ‘the market will be the ultimate judge’. News of Xtreme Aerodynamics second body release, the ‘Redhawks’ is expected tomorrow.

View more images here

March 12, 2023

3D printed 1:12 at ROAR Nationals

Supporting customers of his 1up Racing products trackside at the ROAR Electric On-Road Carpet Nationals, Randy Caster, a stalwart of the onroad racing scene in the US, has picked up on an interesting car competing in the event – Scott Jakes 3D printed 1:12. Taking place at Eric Anderson’s Apex Raceway in Tennessee, Jakes is racing his latest project in the 13.5 1:12 class and as Caster points out in his social media post about this 3D printed car this could well be a glimpse of the future of the hobby.

View more of Randy Caster’s images here

March 10, 2023

T-Works X4 Titanium BB Driveshaft Adapters

From T-Works comes these titanium BB Driveshaft Adapters for Xray X4 ’23 1:10 Electric Touring Car. Machined from 64 grade titanium, they are offered as both Solid and Gear Diff adapters and are a direct replacement for the standard unit used with Xray’s ECS Ball Bearing driveshafts. On the scales, a set of the T-Works adapters offers a weight saving of 3.6 grams on the Gear Diff adapters and 3.3 grams with the Solid adapters.

View more images here

March 9, 2023

Yokomo BD11 Option Parts

Yokomo has released a number of new optional parts for its current BD11 1:10 Electric Touring Car. First up is a new hard type plastic body mount set for the BD11. For those chasing marginal weigh savings they have also added a set of titanium lower shock mounts for BD11 and which can also be used on the MD1.0 drift car. Finally for the perfect balancing of your chassis there is a new 30G battery weight which is nicely finished with the Yokomo Factory Team logo.

View more images here

March 9, 2023

Pirani RC ‘Turbo Effect’ INS-Box

Pirani RC has released a new ‘Turbo Effect’ INS-Box design for 1:8 and 1:10 onroad competition. EFRA approved, homologation number INS202301, the new design is 20% lighter, 8mm lower and 3mm less in diameter than other INS-boxes. Made of light weight ABS, internally the sponge filter is low profile to reduce the total height of the ins-box. The air inlet has two 8mm holes from where air pass through the “turbo effect” and goes into the carburetor with more speed and more pressure. This increase of air pressure makes the top speed rising of 2km/h, more constant carburetion and more torque. All combined with new aero design, especially designed for new 1:8 onroad bodies.

View technical images here

March 8, 2023

Reds Racing 1:8 Motor 40mm Fan Holder

Reds Racing has produced this new aluminium 40mm fan holder for use on 1:8 electric motors. Clamping around the motor this help with heat dissipation which is fundamental to keeping your motor working perfectly. The two piece mounts are black anodise and finished with machined silver edges.

View holder parts here

March 8, 2023

1up Racing UltraLite 30mm Fan Shrouds

Randy Caster’s 1Up Racing has introduced new UltraLite 30mm Fan Shrouds to maximise the effectiveness of your motor’s cooling fan. Made in the USA by Vargr Industries with high quality materials and the latest 3D printing technology, the fan shrouds are strong while keeping the overall weight incredibly light. A perfect match for the 1up Racing UltraLite 30mm Aluminium Cooling Fan but are fully compatible and look great with any 4-hole 30mm fans. Traditional Ducted is the most common and directs all air forward. This is flat on the bottom for those who want to chassis mount their 1up UltraLite Cooling Fan without the Optional Brass Chassis Mount, but still fits perfectly along with our Brass Chassis Mount. Weighs only 2.7 grams! Bypass for EP TC directs all of the fan air forward while also pulling in air from two vents on the top and right side, perfect for nearly every 1/10 electric touring car with belts and weighs only 3.5 grams! Like the Traditional Ducted Shroud, this is flat on the bottom for chassis mounting and fully compatible with our Brass Chassis Mount. 2wd Buggy Rear Fit funnels air between the endbell and transmission case towards the rear side of the motor. Tested and fit on the Team Associated B6.4, the shroud may require minor trimming for proper clearance on other buggies and it weighs only 1.2 grams!

View Shroud fitted to Touring Car here