Red RC » P On Road

September 2, 2009

Sweep Racing EXP-36E 1/10 tires

Sweep Racing have released their new high traction type EXP-36E 1/10 on road rubber racing tire, which feature superior traction levels compared to the company’s successful Sweep ‘R’ and ‘QTS’ series tires. Using a new rubber compound to gain maximum traction, the diameter is in between the ‘R’ (65.5mm) and the ‘QTS’ (63.5mm), which is 64.5mm to work well on both carpet and asphalt surfaces. These tires, the first in their new EXP series, are designed for best use in track temperatures starting from 33 degrees celcius.

Source: Sweep Racing [sweepracing.com]

September 1, 2009

ABEC35 Engine & Thrust bearings

Ball bearing company ABEC35 have released version 2 of their 7x19x6mm engine bearing. This new type features redefined radial play and inner diameter and each bearing comes with 2 contact rubber shields (1 black & 1 blue) and is greased. Suitable for off road conditions and if using them in on road simply take the blue shield away. Another new product is their thrust bearings (F5-10M 4.8/5.0) for Kyosho push type clutches. Comparing to the previous clutch bearings (F5-10M 5.0/5.2) they have over size balls, 9pcs x 2.0mm, for extended life.

Source: ABEC35 [abec35.com]

August 30, 2009

Pirani Motor Sport MRX-4 options

F.V.S.S. Racing Team have released this Pirani Motor Sport kit for the Mugen MRX-4. Developed and tested by Andrea Pirani it is composed of superior front upper support brackets and rear wishbone support brackets. This kit claims to provide better steering and greater traction and is available in front or rear parts and for the best performance, as a complete set.

Source: FVSS [fvssshop.it]

August 27, 2009

KM Racing V-One RRR Copper Battery tray

KM Racing have come out with some more parts for the Kyosho V-one RRR, with the release of this new battery tray. Made from copper, the tray brings weight to the lowest and most central point on the car, which not only helps increase chassis rigidity but also helps stop the car from traction rolling in high grip conditions. Machined with 2 grooves for tape to mount the battery, it sports the KM Racing logo engraved on the bottom.

Source: KM Racing [km-rc.com]

August 27, 2009

CSO Racing 733 & V-One RRR chassis plates

CSO Racing products have released 2 new chassis plates for both the Serpent 733 (above) and the Kyosho V-One RRR Evo 2 WC. Both chassis’ have been CNC machined from 3.1mm thick 7075 T6 aluminium and then hard coated for a stronger and longer lasting finish.

Source: CSO [cso.com.hk]

August 26, 2009

KM Racing MTX4 Options for O.S. Speed 12XZ

New from KM Racing for the Mugen MTX-4 are these new lightweight items to mount the O.S. Speed 12XZ engine. First up is this new one piece engine mount that has all the advantages of a monoblock, such as less strain on the crankcase and ease of mounting, yet has been machined for extra weight savings. Also new is the lightweight carbon fibre top deck which thinner by 0.5mm from the previously released version to make it easier to use with the O.S. Speed 12XZ engine.

Click here to see the radio plate

August 19, 2009

Titanium Racing Lightweight Xray outdrives

New from Titanium Racing is their replacement light weight outdrives designed to fit the original Xray Composite spool. Precision manufactured for from high impact Acetal and containing a factory fitted alloy sleeve, these units are said to improve steering and be slightly stronger than the original items. The button head screws in the original items have been replaced with neater countersunk screws which also adds to its strength and impact resilience.

Source: Titanium Racing [titaniumracing.com]

August 17, 2009

Capricorn RC Hard Light transmission

Capricorn RC have created a new brand called ‘Hard Light’ which will make optional parts for a range of cars. The first product is this complete transmission set for the 1/8th Kyosho, Mugen and Shepherd and will reduce the overall weight by 64 grams. The set comes with front and rear wheel axles, rear main axle, front drive cups and can be complete with either front and rear dogbones, or front CVDs and rear dogbones, in either aluminium or steel.

Source: Capricorn RC [capricornrc.com]