Red RC » P On Road

February 24, 2009

McPappy Racing Caster Blocks & Bumpstops

McPappy Racing has now released a number of new items for their Dart 1/10th scale oval racer. First up is a line of 0, 5 and 10 degree Caster Blocks, which feature 3 holes for the upper wishbone mount that allow you to choose how much camber gain you want ,while providing 0, 5 or 10 degrees of active caster. To compliment the new blocks are these precision machined, adjustable bumpstops that allow you to independently control exactly how far each front wheel suspension will travel. You can engage them just a little bit to keep your chassis from bottoming out, or you can engage them earlier to control how the car reacts in the corner. One of the biggest benefits of running bumpstops is getting more weight on the left front wheel in the corners. As the car enters the corner weight shifts diagonally to the RF wheel. The RF bumpstop engages and now the weight travels to the LF wheel. Then the LF bumpstop engages and applies weight down on the left wheel. Bumpstops also can prevent rolling and keep the car level in the corners. These bumpstops are slotted so that you can slide them forward or rearward depending on how much caster you are running.

Click here to see more pictures

February 23, 2009

Mega 2009 Engine line-up

Serpent have released details on their 2009 Mega engine line up, which are the result of continuous development in cooperation with Picco over the previous season to bring you some important modifications. The new line up is called DSIII and pricing on the Mega engines will remain on the very affordable level as before. The entire range has been given a makeover and full details on all the engines can be found below.

Click here for more details

February 23, 2009

Xray NT1 Lipo Battery Plate

Xray have released this LiPo tray for the NT1, which was designed to accommodate the lower weight of the LiPo receiver battery pack compared to standard NiMH receiver battery packs. CNC-machined from a single piece of solid brass, the tray is additionally black coated for protection and laser engraved with the Xray logo for authenticity. The slick, narrow design allows you to mount a lightweight LiPo receiver battery pack, and being made of solid brass, weight is brought to the lowest part of the car as well as to the car’s centre line. This makes for a more balanced car, as well as more stable and easier to drive through corners and over curbs. Traction rolling is reduced in high-traction conditions, and handling is improved in low-traction conditions.

Click here to see another picture

February 23, 2009

Much More Diff Master

Korean company Much More have released their diff master, a tool which helps you rebuild the ball differential on your touring car. These smart tools have two functions, the first is a diff ring holder, with a small magnet on one side, so the diff ring can be attached and held easily for sanding smooth again. The other side of the tool can be used as a diff stand, securely holding the ball diff and stabilizing it while you insert the small diff balls and it also has a pin or a small block to hold the diff nut or screw, so you can reassemble the ball diff very easily. Available in 3 different versions for 3 different cars, the blue version is suitable for the Tamiya TRF416 & TA05, the purple version for the HB Cyclone and the black version for the Xray T2’008 & 009.

Click here to see the tools in action

February 21, 2009

K-Factory Lightweight G4 Differentials

K-Factory have released this pair of lightweight differentials for the Team Magic G4. The differential cover is now hard coated lightweight aluminium and have been precision machined and lightened to reduce rotational mass, improving acceleration and deceleration. The bevel gears within the differential have also been redesigned to precise specifications creating an ultra smooth and efficient meshing. Finally K Factory has reduced tolerances during engineering to provide precision specifications and a perfect fit into the bulkheads, this improves the power delivery to the drive system without the losses of efficiency incurred by a loose or sloppy fit.

Source: K-Factory [kfactoryracing.com]

February 19, 2009

Schumacher XVS cells & Mi3 options

Schumacher have released a number of new competition items, starting with their new XVS Team Select cells. Using Ener-G 4600mAh cells as the base, these matched packs are said combine high performance with robust construction, and are available in sets of 4, 5 & 6. For the Mi3 platform is a new rear shock bracket, which has wider mounted body posts to provide a better mounting platform for the body, making the whole car more stable. Also new for the Mi3, and also for the Mi2 platform, are new 4 degree C-hubs that have been molded from a more flexible polymer to give more steering and better impact absorption. Finally for the Mi3 is a new 66T 48P spur gear for an additional gear ratio tuning option.

Click here to see the other products

February 16, 2009

Xceed RC lightweight 1/12th scale rims

Xceed RC have announced details of new lightweight versions of their 1/12th scale rims. Suitable for most 1/12th scale chassis, the new tires and wheels combination are made in the same factory as their gas on road tires in Italy and now feature the new lightweight material for the rim. This new semi transparent material aids performance by reducing rotating mass yet is still strong enough to withstand your car clipping a track board. Available in the usual rang of shores for the front and rear.

Source: Xceed RC [xceedrc.com]

February 11, 2009

Capricorn RC Pit Box, Regulater & Setup system

Capricorn RC in Italy have been crazy busy lately adding to their product range, even branching out into conversions and complete kits. Today they have released a number of new items including this great looking aluminium pit box. Sporting a carbon decal, the box is similar to others on the market with space for all the tools and parts you need to take into the pit-lane with you for that important race. Also new is their exhaust gas regulator and cooler, which like other systems can help you regulate the pressure between the muffler and the tank while at the same time cooling the exhaust gases to help improve fuel consumption. New for setting up your car is this red anodized setup system for touring cars and separately 1/8th scale on road. Supplied in a handy metal case, the system is ball raced for optimal precision. Finally, also for set up is their new aluminium gauge set, which includes 2 chassis droop gauge blocks, chassis droop gauge -5 to 10mm and a chassis ride height gauge with a range from 3-10mm.

Continue to see the product pictures