Xray have announced the release of this complete receiver switch set for the NT1 that fits directly into the car’s composite receiver case. This pre wired mechanical on/off switch, for quick & easy powering/shut down of on board electronics, comes supplied with a moulded rubber cover that protects the switch from contamination by fuel and dirt. Comes fitted with Futaba J connectors.
Source: Xray [teamxray.com]
GRP were in touch to let us know about their new GRP engine line, born from an innovative and well-advanced industrial project with the direct technical direction of Mario Rossi. GRP have established a technological and futuristic research centre, which has allowed the production of their very first projects such as the Ninja, Falcon and Boss motors, and that in the future will allow constant product development. All engines designs in the range have been studied with the most up-date and advanced mechanical simulation software to reproduce the normal working conditions of the engines and to check all components and materials for deformations at high temperature.
Click here for more information and engine photos… content
K-Factory have released these CNC-machined rear hub carriers with 1.5 degrees of toe-in for the Team Magic E4. The hub carriers have been precision machined to exact tolerances and are extremely tough, due to the high strength of the material chosen and the parts design. Even though they are very strong, they are very lightweight, with the strength achieved due to smart engineering and the carefully chosen materials.
Source: K-Factory [kfactoryracing.com]
New for the S400, Serpent has introduced the long awaited front one-way axle set. Sold complete with everything needed, including the 35T composite pulley, when installed the set gives the car more steering and is perfect for use on carpet tracks, especially with foam tires. To improve durability the drive adaptors have been made from steel, yet remain lightweight due to their hollow design.
Source: Serpent [serpent.com]
New for the shorter-length shocks of the Xray T2 family of 1/10th scale electric touring sedans, Xray presents the ultimate high-performance racing springs that have been specially developed for rubber-tire racing, giving better balance and an additional range of choices to fine-tune your car. Developed through extensive testing and racing experience, these linear springs are shorter and have a larger internal diameter. The same thickness of wire is used for each spring, and stiffness is controlled by the number of coils.
Source: Xray [teamxray.com]
Much More have announced the release of new range of dyno tested brushed motors for various budgets and applications. Providing high RPM and torque, this new range of motors are the perfect choice for 1/10th scale on and off road racers as well as 1/12th scale circuit racers. Available in a range of different winds, the motors all feature stand up brushes, capacitors and the Kali and Eavan series sport dual ball bearings. Other features include colour coded brush heat sinks, while the motor’s high torque amature design creates a more intense magnetic field for quicker spool-up. The Kali Modified motor is available in 10T double, 11T double and 13T double, the Eavan is a 19T motor while the Farrel is 23T.
Source: RC Forum [rcforum.co.kr]
Serpent have introduced a new seal for their AFL fuel tank lid that prevents leakage and thus provides more consistent engine performance. Made from rubber, the new seal has been shaped to create a perfect seal around the opening of the tank and allowing the tank lid to close fully. Both the 1/8th and 1/10th scale fuel tanks have also been updated, to both include the new lid seal but also have been made from a newer stronger material. The milky white coloured tanks will now have more resistance to shattering in the event of a heavy impact and changes to the lid pivot pin position further ensure a perfectly sealed tank. Both new tanks come supplied with a 50cm length of clear fuel tubing, as well as fuel nipples and grub screw for AFL lid.
Click more to see the tanks… content
Serpent have released 2 new ceramic ball bearings for use with the Serpent S400. Available in both 10×15 and 5×10, the balls used are extremely hard and ultra lightweight and make a great option for those who are looking for extra durability and an added weight advantage. Running extremely free, thanks to a specially selected lubrication, each bearing is sold in a pair and is a direct replacement for the original part.
Click more to see the other bearings… content
