Red RC » P On Road

September 20, 2007

CRC Gen-X and Losi 8ight parts

Calandra Racing Concepts in the US have released a number of new parts for their own line of carpet racers as well as something for off road buggies. First up the release of a carbon fiber cross brace for the Gen-X (above) which mounts to the CRC lower arms, keeping the front end strong, straight and true even with the heaviest impacts. The brace also acts as a mount for CRC’s new “Long-Arm” option, coming soon for the Pro Strut front end. Also new are a number of super strong and light titanium parts such as upper pivot balls for the Pro Strut front end, front end screws and tie rods, also for the Pro Strut front end. Finally, for the Losi 8ight and 8ight T, CRC have made some “No-Pop” steering balls that capture the link, keeping the tie rod attached to the ball even in the event of a hard impact.

Click here to see the other products… content

September 19, 2007

Rony parts for Spada and NT1

Japanese company Rony have announced the release of some new carbon parts for both the Kyosho Spada and the Xray NT1. The Spada gets a new chassis plate which Rony have made from carbon fibre, replacing the standard aluminium version and therefore saving weight without sacrficing strength, although not sure how heat dissipation will be handled. New for the NT1 is a rather beefy looking 4mm thick carbon fibre rear shock tower, the latest in a long line of companies to try their hand at this part.

Source: Rony [plala.or.jp/rony]

September 16, 2007

Novak Micro Sensored BL Motor system

While specifications and features are not yet fully finalized, Novak have announced that their are in the process of finalising this new micro system which will feature the same sensored technology employed in their GTB, XBR and HV systems. This sensored design ensures silky smooth, low-end throttle and brake performance yet still retains quick response throughout the rest of the throttle and brakes. The motor is a standard 380-size and will easily fit in most available 1/18-scale vehicles such as the Xray M18 shown above. The ESC is roughly the size of Novak’s GTX. Available in the near future.

Source: Novak [teamnovak.com]

September 1, 2007

Serpent brass Battery holders

New for your Serpent chassis are these brass battery holders for the companys 960 and 720 chassis’. A direct replacement for the original plastic version they have been machined from a single piece of brass. Using these new heavier battery plates brings more weight to the lowest part of the car and helps prevent the car from grip rolling in high traction conditions and thus allows your car to corner at higher speeds.

Click here to see more pictures… content

August 30, 2007

Mugen MRX-4X optional battery holder

Mugen have release this new optional battery holder for there MRX-4X. Made from carbon fiber, the holder is claimed to make the car more responsive by improving the rigidity of the 1:8 onroad chassis.

Source: Mugen Seiki [mugenseiki.com]

August 29, 2007

Serpent S400 5-cell Chassis

Serpent have introduced this new 5 cell chassis plate for the S400 to optimise the car further when raced under the latest EFRA rules that require the use of only 5 cells. Machined out of a 2.5mm sheet of high quality carbon fibre, the plate is a simple replacement for the standard 6 cell version but now only sports 5 cell slots and this allows for a less tight radio equipment configuration. The chassis has contersunk screw holes on the bottom a better weight distribution, a machined slot under the motor to allow it to sit as low as possible and all the areas that are used for mounting the cars electrics have machined grooves to provide that all important cooling.

Click more to see the other side of the chassis plate… content

August 28, 2007

KM Racing NT1 option parts

KM Racing have released yet more parts for the Xray NT1 with the announcement today of 3 new items for the car. The first up is a new aluminium side stiffener which is super lightweight, yet helps add extra support to the structure of main chassis. The next new item is an aluminium brake lever which sports 3 holes to mount the cars brake lever and gives the user more adjustment and better control over the cars braking action. Finally are some aluminium front anti-roll bar levers, which are very stiff and also very strong especially in the event of a crash.

Source: KM Racing [km-rc.com]

August 28, 2007

Mega ZX15 Small Block DSII+ engine

Serpent have announced the release of their European Championship winning small block .15 engine, the ZX15 SB DSII+. One of the few engines available for the 1/10th scale 235mm class, this high performance 5-port engine has been designed for top level competition and comes complete with taller liner, durable pistong and conrod, easy to adjust design carburettor, orange cooling head and superbly finished grey anodised crankcase.

Source: Serpent [serpent.com]