Red RC » P On Road

May 18, 2007

Atomic CVDs for X-Ray M18 Pro

Atomic RC, the small scale optional specialists, have announced the release of these CVD sets for the Xray M18 Pro. Available in a complete set, these blue anodised universal drive shafts are also available to buy seperately in pairs and replace the standard versions that come with the car. We have shown you the Xray versions before and cant see the difference between the 2 except that the Atomic RC version may have more bling factor and are perhaps cheaper.

Check out the seperate sets here… content

May 18, 2007

Xenon Racing Camber gauge

Xenon Racing of Japan have shown their latest new product at this weeks show in Japan, this camber gauge. Made from blue anodised aluminum, this camber gauge works in much the same was as the Yokomo version we showed you before but with more measurements available. Simply stand the gauge next to the wheel being measured, with the numbers facing up, and adjust the wheels camber to the angle of the side that the measurement lines up with.

Source: ARK [ark-inc.jp]

May 18, 2007

Protoform Shadow 1/8th scale body

Protoform Shadow

Protoform have just released images of their newly announced 1/8th scale circuit body shell which is apparentley based on the legendary UOP Shadow, one of the greatest CanAm cars of all time. The Shadow features a low profile body to lower the center of gravity and has been developed with the input of 7 time IFMAR World Champion 1:8 racer Lamberto Collari. This body is made to fit the latest chassis from Kyosho, Mugen, and Serpent and is once again it is available in lightweight as well as a regular weight versions. As usual it comes with an add-on spoiler/gurney extension, body stiffeners w/hardware, and protective film.

Click here to see the side view… content

May 15, 2007

Eagle Racing Setup board

Japanese firm Eagle Racing have announced the release of the new version of their setup board for 1/12th, up to 1/8th scale, chassis’. The board itself is similar to most setup boards on the market, but the unique part, apart from the printed measurement, is the built in tweak board. Pivoting inside the setup board it allows the user to quickly check their tweak without the need to setup a seperate tweak board, while the board itself features a flat level so that you know that you have placed the board flat, ensuring that the tweak is accurate.

Source: Eagle Racing [eaglemodel.com]

May 14, 2007

Corally 12X WC Front conversion kit

Corally have announced the release of a new front end conversion that emulates that used by David Spashett to win last summers World Championship for the Dutch manufacturer. Of course everyone knows that David, and a lot of other Corally racers, were running the CRC front end on their cars, so now Corally have recreated this for themselves and will now be sold as the 12X WC Front suspension conversion kit.

Since David Spashett has become 1:12 IFMAR World Champion 2006 with Corally SP12X US Spec, with a special front end of which brand we all know about, and the demand from end-consumers never seemed to cease, we have finally decided to offer them in our repertoire. All the parts needed to complete the special front end to enable you to simulate the feeling of the true world champion machine are now available.

Click here to see all the parts… content

May 12, 2007

Sirio 2007 Engine line-up

Sirio CL7R STI

Sirio might have been dropped by Kyosho in favour of CRF for team and kit supply but Sirio are still going strong and are still producing very competitive engines. We got hold of images of Sirios 2007 engine lineup from our sponsors, and official Sirio agents, The Border, and we have put them online to show you. A lot of the motors carry forward from last year with the exception of the CL7R STI (above) which is the latest and greatest version of their 3.5cc circuit motor, and the CL7B STI which is the latest top of the line 3.5cc buggy engine. The Border will have most of this line-up of motors in stock from next week onwards, so if you like what you see you can check them out there next week.

Click here to see the entire line-up… content

May 11, 2007

Serpent shock spring supports

Serpent have released 2 seperate shock spring supports for their RCC, and older, shock absorbers. The first versions (above) are made from aluminium and have been lightened through the use of holes and are a direct replacement of the original versions only stronger. The second version, which you can see below, are made from the original composite material, but are 2mm thicker, which means the spring sits 2mm higher on the shock body, allowing for a wider range of spring tension adjustment.

Click here to see the composite spring supports… content

May 11, 2007

Serpent 720 LCG Chassis

Serpent have released this new optional chassis plate for the 720 which has been heavily milled on the topside to enable the whole car to sit lower allowing for a lower centre of gravity while, through the addition of extra holes, the chassis plate is now extremely light. This chassis will be perfect for those racers looking for that extra cornering advantage in higher grip conditions and to allow your chassis to be made stiffer, the front of the chassis has space to mount the optional carbon stiffener plate, which will be sold separately.

Source: Serpent [serpent.com]