Red RC » P On Road

November 15, 2022

Awesomatix AM23-R Rear Steering Arm

Awesomatix has released a new rear steering arm for their A800 touring car platform. The new AM23-R version is longer compared to the previous AM23-1 Rear Steering Arm. This feature reduces the free play of the rear toe and improves ARS characteristics. The improved characteristics of the ARS helps with better mid-corner steering and reduce the risk of snap oversteer during load changes. Awesomatix recommend to use 0.5mm less bumpsteer shims, to keep the same ARS action as with AM23-1.

View comparison of rear arm options here

November 15, 2022

Arena RC Racing X4 ’23 Carbon Parts

Arena RC Racing have announced the release of carbon parts for Xray’s X4 ’23 Touring Car. The Split Front 2.0mm Graphite Upper Deck gives increased initial response and is suitable for medium to high traction conditions. The Split Rear 2.0mm Graphite Upper Deck provides a little extra flex making it suitable for a wider range of conditions. The other new offering are Graphite Protectors for X4 Composite Hub that are made from 2.0mm graphite and replace the washer for protection of your hub.

View parts here

November 14, 2022

Yokomo BD11 US Style Aluminium Chassis Kit

Yokomo is now offering their successful BD11 in a new American-spec chassis kit equipped with a new hard aluminium main chassis. The 2mm-thick high-strength aluminium main chassis is a solid spec, with no cutting of any parts to reduce weight. The strength of the chassis improves stability and lowers the centre of gravity, making it ideal for the ultra high-grip surfaces found in American indoor racing. It optimises steering response for smooth driving and prevents high-sides caused by over-grip. The US aluminium chassis version also features suspension tuning to match the rigidity of the main chassis, with 2.1-2.4 progressive springs installed in the front and 1.3mm front and rear sway bars made of a new material. In addition, a new rear belt tensioner has been installed to prevent the belt from jumping teeth during sudden acceleration, making it possible to be fully prepared for driving on high-grip surfaces.

View more images

November 14, 2022

Yokomo GT1 Lightweight Graphite Parts

Following the recent launch of their much applauded new GT1, a car that was conceived as starting point for bringing new people into RC racing, Yokomo is now offering some lightweight graphite parts for the simple 1:12 chassis. By replacing the standard FRP plates with carbon ones, the car’s weight can be reduced and the rigidity can be increased. Offering a lower chassis, upper chassis, rear bulkhead plate and body mount plate, they will dramatically increase the performance of the car, and at the same time, will give the car a racing look. The main chassis is made of 2.4mm thick material to increase pitching rigidity while minimising roll rigidity for easy manoeuvrability. The side slits, which serve as the rear suspension, are also longer than standard to provide supple suspension operation.

See parts here

November 13, 2022

R1 Wurks DC1 Lay-down Transmission

R1 Wurks has released a new lay-down transmission for their DC1 Drag Car. The transmission is made in house at R1 Wurks HQ in California and is machined out from 7075 Aluminium. The lightweight lay-down transmission, features a low centre of gravity design, weighing in a 69.28grams. R1 Wurks have eliminated the shock-tower mount and adapter and they have removed the camber link mount and created a direct connection to the transmission itself. This kit includes the new shock-tower that mounts directly to the back of the transmission. This new transmission mounts seamlessly to the existing DC1 Chassis with no modification required. The kit includes transmission, shock tower, shim kit, 3mm, 8mm, & 14mm screws.

View more images here

November 11, 2022

Ruddog RSS65 Soldering Station

Ruddog Products has released the RSS65, a versatile soldering station for avid RC hobbyists. With its wide input power range it is ideally suited for international travel racers. Thanks to 65 W of power, an adjustable temperature range from 180 °C to 480 °C and changeable tips, it is equally capable of high-precision and power hungry soldering tasks. The large easy to read display and ergonomic grip ensure comfortable working conditions.

View features and spec here

November 10, 2022

IRIS Touring Car Teaser

Electric Touring Car newcomers IRIS have released as a teaser this image of the chassis plate of their upcoming debut kit. Pitched as a new innovative touring car designed by Andreas Myrberg, it is set to be released shortly with IRIS announcing recently Dionys Stadler as their first Modified driver and Alex Kunkler for Pro Stock.

Source: IRIS [Facebook]

November 10, 2022

Schumacher Formula/F1 Spool Axle Set

Schumacher has released for the Icon and Icon 2 a new lightweight rear axle spool set. The spool set can offer improved steering, direction change, acceleration and corner entry/off power stability. When comparing to a ball or gear differential, a spool is particularly effective in high grip conditions such as on carpet with foam or rubber tyres. Supplied with a lightweight carbon axle and 88T 64DP Spur. The set can be used on other manufacturers cars, however, width spacing may need adjusting.

Source: Schumacher [racing-cars.com]