Red RC » P On Road

July 17, 2007

Serpent monoblock LCG engine mount

Serpent has released this latest LCG orange anodised engine mono block for use with 12 size engines in the Serpent 720 which drops the engine by 1.5mm and thus helps lower the cars centre of gravity. Suitable for Picco and Novarossi based motors, this block ensures the engine mounting points are kept aligned reducing stress on the crankcase, which allows the engine to rev freer. The extra material used in the blocks, and with the addition of fins, also allow extra cooling to the crankcase and ensure the centre of gravity is kept as low as possible.

Source: Serpent [serpent.com]

July 17, 2007

HARD Compact-Line Touring bag

HARD Compact-Line 1/10th touring bag

H.A.R.D. Racing have announced the release of this great looking and very functional compact-Line 1/10th touring bag. Made from the highest quality materials and constructed to last, you’ll find that its big enough to conveniently carry your car and R/C gear to each meeting. Made from super strong styrofoam, its attractive shape and styling makes it the perfect R/C accessory while the two internal boxes, shoulder strap and handle make it very practical.

Source: HARD [hard-racing.com]

July 16, 2007

Protoform Frizbee 1/8th scale body released

Protoform Frizbee

As expected Protoform have released their latest 1/8th CanAm body style, called the Frizbee, and it is designed for large tracks with long straights and sweeping corners. The Frizbee incorporates some unique air management features to improve handling and stability. A molded in fairing is located behind the cylinder head and INS box to minimize turbulence and aid airflow to the rear spoiler. In the front there are a pair of air-extractor vents that increase front downforce when properly cut and folded downward. The Frizbee fits all the popular 1/8th chassis and sits nice and low. Rear bite can be adjusted with the add-on rear wicker/gurney tab. Available in .030 Lexan (lightweight) or .040 Lexan (regular weight) this body has protective outer film and body side-stiffeners with hardware.

Click here for more pictures…. content

July 16, 2007

Serpent ride-height and droop gauge

Serpent have announced the release of this all-new ride height and droop gauge for use on all circuit based cars. Machined from a single block of aluminium, it has been orange anodised and lightened further with the addition of 3 holes in the body of the tool. This 2 in 1 gauge can measure both droop, when used in conjunction the new Serpent setup blocks, and can easily be used to measured the cars ride height by simply rotating it 90 degrees. The tool sports the new Serpent logo and can measure between 2mm and 10mm ride height and –2mm to 11mm droop.

Click here to see more pictures… content

July 16, 2007

Serpent 960 & 720 – New optionals

Serpent 960 & 720 - New optionals

Serpent have released some new parts for the Serpent 720 and 960, the first being this brass plate for use in the optional Serpent 720 LCG chassis plates. Made using very hard brass material, this plate provides more weight to the front of the car, helping to remove snap oversteer and allowing the car to corner faster and smoother. In addition to the improved cornering speeds the added weight mounted in the chassis helps prevent grip roll on high traction surfaces. Also new from Serpent for both the 960 and 720 are these thin and therefore super soft front anti-roll bar blades. These new blades have the same hard setting as before but in the softest setting they are much softer providing even more steering and overall they allow a wider range of settings. The end of the shafts have also been changed and now have a new adjusting slot which enables you to easily see the setting of the anti-roll bar.

Click to see the anti-roll bar levers… content

July 15, 2007

Solaroli Tuning Picco Evo3 .12

We wrote about the Solaroli tuned Picco engines back in March when the Italian driver released his hand tuned Evo2 .12 and .21 engines. Now with the basic Picco engines updated, for better durability and performance, Stefano has hand worked and is now selling the Evo3 version of the Picco .12 motor. The work that is done features porting of the liner, and other work, as well as optimising and polishing the crankshaft to get the absolute best out of the engine.

Source: Solaroli RC Tuning [solarolirctuning.com]

July 15, 2007

3Racing Professional Tweak Station

Aftermarket parts maker 3Racing have released this professional tweak station which has been specially designed for 1/8th, 1/10th and 1/12th scale circuit cars. Both front and rear platforms have engraved calibration for measuring the tweak, wheelbase and track width and you can use the tweak station on any flat surface with the adjustable feet. The tweak station works the same way as others currently on the market and simply offers another choice for those looking to buy one.

Source: 3Racing [3racing.com.hk]

July 15, 2007

Much More Sweep tire traction

Much More have released a new range of tire additives, and tire care, for rubber touring car tires under the name Sweep. The range of tire additives are called Z1 and Z2 and as with all tire additives, add more grip when applied and allowed to soak in, while the tire cleaner and refresher does exactly as its name suggests by helping to prepare your tire surface for the additives.

Source: Pit Work [pitwork.co.kr]