Red RC » P On Road

June 16, 2022

ProTek RC 8800mAh & 7100mAh drag spec packs

The RC drag racing community spoke and ProTek RC listened and is now launching its own line of drag racing specific LiPo batteries. The ProTek RC 2S 200C 2s5p 7.6V/8800mAh shorty pack and ProTek RC 2S 200C 2s4p 7.6V/7100mAh shorty pack are designed with a moulded hard case for added protection. Both ProTek RC batteries are outfitted with large 8mm output bullets for low IR connections between the ESC and battery, eliminating weight and clutter within the chassis of the car by not having plugs. Both batteries feature a 200C burst cell rating and the 2s4p and 2s5p cell configurations drastically help with the voltage drop from high amperage experienced in drag racing. The 8800mAh and lighter weight 7100mAh both have been rigorously raced and tested by ProTek RC Pro Race Team member Frank Ulbrik, and have posted some of the fastest recorded NPRC passes this year.

Source: ProTek RC [amainhobbies.com]

June 15, 2022

Infinity 1/8th wheel reamer

Creation Model have released this Infinity wheel reamer to widen the hole diameter of 1/8 GP racing car wheels to the optimal size (12mm). If the wheel and axle shaft are too tight, it can cause problems such as not being able to install the wheel correctly or not being able to change tires efficiently during pit stops. This wheel reamer is used by threading it through the hole in the wheel while turning it.

View the reamer here

June 15, 2022

Rêve D 7-spoke JD7 wheels

Rêve D introduce their sharp looking 7-spoke JD7 wheel to their competition wheel series, which is popular for its light weight and high traction. There are two colours available, matte black and matte white and a new 8mm offset is also available, which has received many requests in addition to the conventional 6mm. This new design maintains the highest performance criteria of light weight, about 11g per piece, and high traction, all with a large inner diameter & thin rim.

Source: Rêve D [teamreved.com]

June 15, 2022

Exotek B6 HD laydown gearbox & gearbox spacers

New from Exotek is this high performance heavy duty laydown gear box with motor plate for AE B6.1-B6.4 drag racing builds. All alloy gearbox construction keeps your gears in perfect alignment for true mesh and no gearbox flexing that causes binding at high rpm’s. A direct bolt on for AE B6.1-B6.4 drag racing builds, the high diff setting for improved cvd axle angles (flatter axles for less binding and more rpm’s), +1mm higher diff than on the stock plastic laydown gearbox’s highest setting. There is also integrated bearing supported sway bar mounts offering super accurate sway bar function, yet easy to use. The heavy duty alloy motor plate has extra long slot mounting slots for larger gearing range options. Another option are these 2.5mm thick carbon fibre spacers that raise the AE B6.1 – B6.4 series laydown/layback gearboxes up so that the dog bone angle sits straighter when at ride height and gives you extra room to install larger spur gears so that they don’t touch the chassis.

View more images of the new items here

June 14, 2022

Ielasi Tuned GP5GTR22 engine

Ielasi Tuned are pleased to announce the new GP5GTR22 engine which is making its official debut this week at the GT European Championship in Lostallo. This engine has been improved in performance, as fuel consumption has always been comfortably above 7 minutes with the old GP5GTR. Now you can expect more acceleration and more speed on the straight line meaning that this engine raises the level even more in this category that is increasingly gaining ground and is in full evolution. This upgrade also includes the new, 15 gram lighter cooling head which will optimise the handling of your car.

Source: Ielasi Tuned [ielasituned.com]

June 14, 2022

Xtreme Mach1 190mm TC body

Xtreme Aerodynamics have shown a first photo of their all new 190mm touring car body, which they are calling the Mach1. The new body sports a much more aggressive front end compared to others on the market with a large front lip and newly shaped wheel arches that allow the airflow to be channeled to the rear of the car which itself has gotten lots of attention with fine details. Bruno Coelho did a video on the new body which best explains the new details and how that translates to on track performance. You can check it out below.

Watch Bruno’s video here

June 14, 2022

Reds Racing 521 GTS Gen2 engine

Reds Racing have introduced the new 521 GTS Gen2 engine specifically developed for 1:8 nitro GT class. The new 521 GTS Gen2 engine features high power, tuning stability and great fuel mileage. Combined with specific technical changes at the carburettor, combustion chamber and front bearing, this 5 port engine features higher power and better fuel efficiency compared to any other engine. They have developed 3 different combinations for this engine: 521 GTS with steel bearing, 521 GTS with ceramic bearing and 521 GTS Pro Tuned by Mario Rossi with ceramic bearing. You can order all of them with or without pre break-in service.

View more details & images here

June 14, 2022

RC Maker MTC2 carbon upper bulkhead set

RC Maker introduce their brand new carbon upper bulkheads for the Mugen MTC2. These 2.5mm CNC Machined Upper Bulkheads allow more flex on the caster axis and provide improved traction for your MTC2 Chassis. 3 Different Versions provide different caster settings for all tuning options front and rear. Front Caster is a great tuning option to balance between high and low speed steering. Less caster provides more low speed steering for technical tracks, while more caster provides more high speed steering for fast, flowing tracks. Rear Caster on modern chassis’ defines the rear wheelbase. More rear caster shortens the wheelbase for smaller, more technical tracks where rotation from the rear is required. Less rear caster lengthens the wheelbase which provides support and stability for more open, high speed tracks where confidence in the rear is required to push. The plates use the original pill inserts and also feature the same thickness, leaving all geometry unchanged.

Source: RC Maker [rcmaker.com.au]