Red RC » P On Road

December 20, 2021

Infinity IF14-2 flex shock towers

For the Infinity IF14-2, Creation Model have released a new line of flex shock towers. By reducing the rigidity of the shock tower connecting point to the upper bulkhead, the stiffness around the bulkhead section is reduced and the overall chassis flex is increased. When used up front it can result in a calmer initial steering response with the reduction in initial stiffness helps smooth out cornering and can help reduce tyre wear. In the rear it allows for smoother rear rotation. The rear tower comes in regular and horizontal body post versions.

View the rear towers here

December 18, 2021

Bittydesign Hiberya-M 1/10 M-chassis body

Bittydesign have released their 3rd body shell for the 1/10 M-chassis class. Having recently launched the Hiberya 190mm FWD body, today they introduced the Hiberya-M for the 1/10 Mini class. The shapes are inspired by a real car racing in the TCR championship and have been adapted to the proportions and measurements necessary for use with the most common M-chassis models on the market. The design phase took several months to finish every single detail, the attention to detail was obsessive in order to propose a body that could optimise aerodynamics and at the same time remain true in its proportions and aesthetics.

View more angles of the Hiberya-M here

December 17, 2021

Zuykov 1/10 TC setup station

Zuykov, new brand of Russian TC driver Denis Zuykov have released amongst other things, this TC setup station. The idea behind this product is that the kit contains everything you need to set up your car including camber, caster, toe, EPA, droop and ride height. The scale for the camber setting is not at the bottom as usual, but at the top of the setup wheel. This scale is closer to the eyes and its location is much more convenient. Each setup wheel uses 2 bearings for a smooth movement and a scale at the top allows for minimal movement of the bottom over the setup board, greatly increasing accuracy. The top plate can be used on cars up to 210mm wide, adjustable from 40mm out to 40mm in. For owners of Awesomatix A800 the kit includes measuring caster blocks. Thanks to the scale on the side of the setup wheel, the caster and camber can be adjusted simultaneously without the need for a calipers. To change the length of the turnbuckle, there is a 3mm and 4mm wrench in the box.

View more details & images of the setup station here

December 17, 2021

Infinity IF18-2 lay down shock stays & flat tip set screws

Creation Model have released this pair of LD lay down front shock stays for the IF18-2. Made with 2.5mm thick carbon fibre and available in standard and wide versions, the LD stay offers a position one step lower than the conventional tower that is included in the kit while the centre position is the same as the lower hole. It’s designed to be lower so that it does not interfere with the body even when a modern body is installed. Also from Creation Model is this M5x4mm set screw with flat tip which is ideal for fixing the GP car muffler to the muffler stay.

View the other new items here

December 16, 2021

Xtreme Aerodynamics RSX 1/10 FWD body

Xtreme Aerodynamics have introduced their new RSX for the 1/10 FWD category. One of the most difficult and challenging projects they ever made featuring an obsessive attention to realism and details, without neglecting the critical aspects of the performance of this category. The proportions are 100% realistic, with a performance like never before.

View more images of the RSX here

December 16, 2021

Sweep Racing SR-CX28PRO carpet tires

Sweep Racing have released their new SR-CX28PRO carpet tires for 10th touring car competition use. New SR-CX28PRO carpet tires provide maximum consistency from the beginning to the end of a run and have enough durability on multiple carpet track conditions. Comes pre-installed with red lightweight inserts on strong nylon wheels.

Source: Sweep Racing [sweepracing.com]

December 14, 2021

Fenix Racing Mistral 3.3 conversion kit

Fenix Racing have released a massive conversion kit to update the existing Mistral 2.0 to their newest F1, the Mistral 3.3. This is a massive conversion kit comprising of what is almost an entire car itself and also includes all the wearable parts in order to have a real new model.

View the rest of the conversion here

December 14, 2021

OfficinaRC Tungsten Disco

OfficinaRC have introduced the Tungsten Disco. These tungsten discs increase weight and help balancing the car without compromising the flex of the chassis. They are made in 2 sizes, 7.5g and 15g, with their shape is designed to be stacked on top of each other in order to select the appropriate weight. There is an internal thread so they can be easily mounted and thanks to the material used, they are heavy yet take up half the space of weights made of other materials.

Source: OfficinaRC [officinarc.com]