January 26, 2022

Xray X4 aluminium steering block

New from Xray for the X4 is this optional aluminium steering block CNC-machined from premium lightweight T6 aluminium. Ultra-strong construction, it provides very long life and durability in even the most extreme racing conditions. A direct replacement for the standard composite hubs, using the steering blocks in an aluminium material reduces flex, improves consistency and will free up the car, mainly for high grip conditions and especially in spec racing classes. The X4 hub features new suspension geometry for improved steering and traction and contain an updated drive axle that moves the driveshaft pivot point deeper into the hub, in line with the hub’s rotational axis between the upper and lower arm. This alignment improves driveline efficiency and handling. The aluminium front steering plates and rear ARS plates are easily mounted depending on the hub’s location and the design of the hub is universal with the same part used at all four corners with corresponding extensions.

Source: Xray [teamxray.com]


January 26, 2022

Fenix Mistral 3.3 alloy chassis & motor pod

With the carpet season still ongoing, Fenix Racing is proud to present this chassis for the Mistral 3.3. Made from 2mm 7075 aluminium with medium wheelbase dimensions, it means that it could cover 260-265-270mm range to suit the various conditions and track design. Perfectly coupled with their other new release, a 2mm 7075 aluminium motor pod.

View the motor pod here


January 26, 2022

Yokomo FWD Type-A touring car body

This new clear lexan FWD Type-A touring car body from Yokomo meets the regulations of the 1/10 size FWD touring car category held around the world. Wide body fenders create an aggressive appearance, and the short wheelbase and front nose make for a light and nimble feeling. A large rear wing is also included to ensure maximum rear traction and prevent the car from losing cornering speed, resulting in better lap times.

View more angles of the body here


January 26, 2022

Pirani RC MRX-6 belt tensioner

Italian brand Pirani RC have produced this belt tensioner for Mugen MRX-6R and MRX-6X. It replaces the two original side belt tensioner of the car (one front and one rear) into only one new type in the middle of the car helping to improve the free movement of the drivetrain and increase the life of the side belt. The plate is made of high quality aluminium 7075-T6 and hard anodised in black colour and the kit includes screws and nut to fix it following instruction in the package.

View the complete set here


January 24, 2022

Infinity IF14-2 FWD options

New for the Infinity IF14-2 and IF14-2 FWD from Creation Model comes three new option parts. First up for the FWD is the flex bridge graphite top deck that features the same adjustability offered on the IF14-2 and which allows you to tune the chassis flex of the rear section of the car. Next up, also for the FWD, is this upper arm mount upgrade set that allows you to adjust the camber link length and height to perfectly tune your setup for any conditions. Finally there is a new 4 degree hard c-hub set which by using it you will notice increased response and improved steering from the beginning to the middle part of the corner.

View the other new items here


January 22, 2022

Infinity UFO & slim head titanium screws

Creation Model have introduced 4 new Infinity titanium screws, the first of which is this UFO head M2.5x6mm screw. Machined from high quality 64 titanium material it can be used to attach the anti-roll bar holder of the IF14-2 and IF14-2FWD. The other 3 screws are slim head screws that come in M3x8mm, M3x10mm and M3x14mm. The M3x8mm replace the steel slim head screws used to mount the rear chassis stiffener on the IF14-2FWD these will reduce weight and allow for fine chassis flex tuning. The M3x10mm are a direct replacement of the steel rear body mount screws of the IF18-2 and IF15W. And finally the M3x14mm slim head screw replaces the steel slim head screws used in the installation of the IF18-2 front blocks. The wrench size used is 2.0mm, and can also be tightened with a firm torque.

View the slim head screws here