Red RC » P On Road

December 8, 2020

Xpress Execute XQ10F FWD chassis

Xpress have released a complete FWD version of their Execute XQ10 featuring a FWD drivetrain combined with a more centrally located centre of gravity. By moving the centre pulley, the motor has been moved forwards as well, putting more weight forward and changing the weight balance. Combined with a purpose shaped chassis deck, which is the result of extensive testing, combined with shorty LiPos offer the best chassis flex. Retaining the screw holes which allow for the installation of the rear T-Plate, this lets you limit the amount of rear flex as well. The topdecks also have Xpress’ signature flex elimination design integrated which allows you to further fine tune the chassis flex.

Source: Xpress [rc-xpress.com]

December 8, 2020

Onisiki full aluminium case drift servo

Onisiki have introduced their new full aluminium case drift steering servo. Fitted with special software optimised for RWD drifting, it has been designed to work with the vast majority of gyros on the market for improved control. The servo sports Onisiki’s signature markings that match their other accessories such as esc, fans, gyros and capacitors.

View another image of the servo here

December 7, 2020

Yeah Racing TC-01 ball raced aluminium steering rack

For the Tamiya TC-01 from Yeah Racing comes this ball raced aluminium steering rack. More durable thanks to its construction from 7075 T6 aluminium and more precise due the materials used and the reduction of flex in this area, resulting in the car having a more direct steering feel.

Source: Yeah Racing [yeahracing.com]

December 4, 2020

Xray X1’21 1/10th Formula chassis

Xray present their new for 2021 X12 Formula chassis, developed with a focus on improving durability, improving adjustability for better performance on a variety of surfaces, and resistance to chassis tweak after impacts. The tweak free design improvements are achieved with a new rear centre pivot mounting system and new pod components. An all-new aluminium centre pivot mounting system improves traction and stability of the car, eliminates tweak issues and provides new adjustment choices to position the pivot point. The one-piece bulkheads achieve maximum durability and eliminate tweak issues after a crash while the graphite rear upper plate has been redesigned to integrate with the new bulkheads to improve durability and to eliminate tweak after a crash. New graphite chassis side braces offer three different installation settings to alter chassis stiffness to match track conditions. To top it all off there is an all new stealth looking black design, with all the aluminium anodised black.

View more details & images here

December 4, 2020

SWorkz S35-GT2 GT Racing chassis

Based on the double World Champion platform SWorkz S35-GT, SWorkz has continued development of their cars and the result is the S35-GT2 and the S35-GT2E. The S35-GT2 is designed as a thoroughbred racing machine for GT Onroad Racing. It has a brand new designed front and rear suspension, while the Ackerman steering geometry was adopted from the 1/8 S35-4 buggy. The 2-speed transmission has also been completely revised on the S35-GT2 platform and significantly improved compared to its predecessor. Sporting a weight-optimised, hard anodised chassis plate made of high-strength T7075 aluminium, the wide layout of the rear axle, developed in numerous tests by their works drivers, is also used on the S35-GT2.

View more details & images here

December 4, 2020

T-Works Tamiya CVDs, offroad wings & 3mm washer sets

T-Works have introduced a number of new items, the first being these Tamiya focussed CVD sets. Made from steel they are available in 39mm, for the TT-01 & TA04, and in 30mm for the M06, M05, M04, M03, M03L, M03M & MF-01X. Replacing the stock driveshafts/CVDs, the new steel part makes it more durable than stock while the CVD creates a more consistent and efficient drivetrain. Also new is a range of lightweight 6.5″ buggy rear wings. Made from lexan and sold as an uncut pair there are two versions, a regular and a flat version. Finally T-Works have released two 3mm bore washer sets, the first comes in 0.5mm, 0.75mm, 1mm, 2mm, 3mm & 5mm thicknesses with 10 pcs of each, and is available in Tamiya blue, black, red, orange, silver or purple. The other set comes with 1.25mm, 1.75mm, 2.25mm, 2.75mm, 3.25mm & 3.75mm thicknesses with 10 pcs of each and in black only and all sets come in a plastic parts box with label decals for easy identification.

View the other parts here

December 3, 2020

Tamiya TA07 aluminium bulkhead set

New from Tamiya for their TA07 chassis is this aluminium bulkhead set. These new parts replace the standard plastic parts for improved stiffness which in turn improves the drivetrain efficiency, suspension accuracy and anti-roll bar function. There is also an additional mounting position for the upper link using an insert. The set is blue anodised and comes with the required fasteners and bearings.

Source: Tamiya [tamiya.com]

December 3, 2020

Muchmore multi droop gauge & support blocks

Muchmore have introduced this multi droop gauge & support blocks to be used with 1/10 and 1/12 On road. Featuring two different sets of measurements on the gauge, the white on black letters are for touring while the black on white numbers are for pan car. These are used for 1/10 touring with the droop block set horizontally while for pan car the droop blocks are used vertically. For Pancar or F1 droop is measured between 0mm and -3mm in 0.2mm increments while for touring car the range is between 4mm and 7mm, again in 0.2mm increments.

Source: Muchmore [muchmoreracing.net]