Red RC » P On Road

June 15, 2020

Xray T4 ECS BB 52mm & 53mm driveshafts

Coming from Xray and made for their T4 line of touring cars are the new ball-raced ECS BB driveshafts. The construction of the driveshafts offers a significant performance gain over the standard blade-type driveshafts as the friction between the driveshaft and the outdrive is greatly reduced thanks to using ball bearings, which helps to give a much smoother handling feel, especially on fast direction changes, such as chicanes. The reduced friction also helps to increase cornering speeds. The driveshafts are available as 52mm variant for smaller, more technical tracks where more initial steering is needed while the longer 53mm driveshafts are best suited for more open and flowing track layouts. They will provide slightly less initial steering, but better steering in the middle of the corner, as well as on power. The BB driveshafts only work with the front solid axle in combination with the optional #305138 outdrives.

View the 53mm driveshafts here

June 15, 2020

Yankee large scale electric pan car kits – Coming soon

Coming soon from French large scale specialists Yankee are the P420 1/4th scale and P520 1/5th scale electric pan car kits. Both are of a simple and efficient design that utilises construction elements known from 1/10th and 1/12th scale pan cars, however thanks to clever engineering the large scale kits are both lightweight and durable, allowing to run them alongside their gas-powered variants. Both chassis offer up to three different wheelbase settings, they utilise a 3-point pod-type rear suspension, a lightweight front suspension and the P420 also allows to use a dual servo steering setup. Other features include module 1.25 and 1.5 gearboxes, aluminium front hubs, and a motor mount that allows to use a range of large-scale-compatible electric brushless motors. The kits will become available as rolling chassis or as combo packages including a body shell.

View more images here

June 15, 2020

T-Works A800MMX & FX titanium top deck screw

T-Works have introduced their new titanium top deck screw for the Awesomatix A800MMX and FX kits. The specially designed bolt is a direct replacement for the standard item, however it is of a lower weight with the natural titanium finish making for a more aesthetic appearance of the car when using titanium screws throughout. The top deck screws are machined from high-quality 64 grade material and they come in sets of three.

Source: T-Works [rc-tworks.com]

June 14, 2020

Serpent Viper 989 40th Anniversary kit

Coming from Serpent is their new Viper 989 40th Anniversary 1/8th nitro on-road kit. The car is issued to celebrate Serpent’s 40th Anniversary and it builds on the proven Viper 989, however it includes many of the parts the team used at the 2019 IFMAR World Championship in California. The base of the car is an ultra-narrow main chassis that offers improved flex characteristics with the main plate being milled down in less load-stressed areas to make it as light as possible while still retaining stiffness in areas needed. The chassis can be loaded with optional balance weights who are attached using a rubber-damped carbon weight bridge that reduces vibrations. On top of this Serpent have incorporated the possibility to add a sliding weight right in the front, also mounted on a carbon bridge. It helps a great deal in avoiding traction rolling and in order to fine-tune the handling of the car.

Continue reading here

June 12, 2020

MCD Racing DUOX large scale touring car kit – Teaser

Turkish large scale specialists MCD Racing have released two teaser images of their forthcoming new DUOX rear-wheel drive 1/5th scale gas-powered touring car kit. The DUOX is an outcome of MCD’s passion to take on a new innovation challenge to create the ultimate 2WD large scale touring race car. While developing the car the main focus was to never compromise on racing capabilities while offering a reliable driving and maintenance experience. Massive care was put into maintaining the core character of MCD Racing’s “racer centered design” philosophy while maximising overall performance. The car is currently in its final development stages and set for a release in the first quarter of 2021.

View another image here

June 12, 2020

MR33 belt booster fluid

Available now from Marc Rheinard’s MR33 brand is the belt booster fluid that was developed to reduce overall drivetrain friction. The chemical will be applied directly to the belts and pulleys where it will reduce the natural drivetrain friction without compromising durability of the belts or pulleys, making it ideal for both stock and modified motor racing alike. The fluid comes in 100ml foam tip bottles.

Source: Tonisport [tonisport.de]

June 12, 2020

RC Maker A800MMX brass & carbon AFEP

Coming from RC Maker and made for the Awesomatix A800MMX touring car are two adjustable floating electronics plate sets. They were designed to placing the weight down low, in the best position, whilst having absolutely no impact on the flex of the car. With both brass and carbon options, as well as an even heavier brass plate option, drivers have all the tuning options they could ever want to achieve the desired balance. The AFEP system can also be shimmed out from the motor-mount to further increase the tuning adjustability. The standard brass set will weigh in at 23g with the optional 25g plate making it 35g in total. As for the carbon fibre variant, it will weigh in at 12g. Both also allow the easy removal of the electronics plate from the car for maintenance and cleaning purposes.

View more images here

June 12, 2020

MSE Performance Parts 10g balance weight

Coming from MSE Performance Parts is a 10g balance weight that is a direct fit for the Mugen MRX, MTX, and MTC range of on-road vehicles. The balancing weight can be used in several areas and is stackable, allowing the driver to alter the car’s weight bias as needed. The weight is precision machined and it comes with a machined weight marking and and MSE logo.

View more images here