Red RC » P On Road

September 17, 2020

RC Maker T4’20 carbon hub extension plates

RC Maker have developed some beefed up extension plates for the Xray T4’20 alu steering hubs. They have also integrated an M3 pressed insert which completely does away with the nut on top of the arm. There’s specific versions for front and rear to maximise strength in each position whilst ensuring required clearance from hubs/wheels. Compared to stock the new plates are thicker at 3mm and have the inner link position removed, while the new profile of the arm has increased strength and flex.

content

September 17, 2020

Rebellion RC body distance system

New from Rebellion RC comes their body distance system which supports the body shell directly over the front wheels. The system is mounted to the car’s c-hub and its adjustable design makes it possible to fine-tune the mounting height of the body. Because the body no longer moves up and down with the chassis you can position the body lower than ever before, which in turn improves aerodynamics. The black holders directly replace the original 2mm shims under the pivot ball like those found on the T4. The set comes supplied with plastic end-caps for improved body longevity.

View the mounted system here

September 16, 2020

Infinity titanium UFO head screws

New from Creation Model comes this range of Infinity M4 UFO head screws. Made from Titanium, combined with the UFO head shape, they offer a lightweight design while maintaining a good surface contact area. Available in a pack of 8, they come in either M4x6 or M4x8.

View the M4x8 screws here

September 16, 2020

T-Works TC-01 driveshaft bearing spacer set

T-Works have introduced this driveshaft bearing spacer set for the Tamiya TC-01. The set consists of 2 blue anodised spacers for the front and rear transmission assembly as well as 4 black spacers for in the front and rear uprights. The spacers go between the two bearings on the wheel axles and the front and rear pilot shaft, replacing the kit version.

Source: T-Works [rc-tworks.com]

September 16, 2020

SpeeDome-RC A800 MMX titanium screw kit

New from SpeeDome-RC is this titanium screw kit for the Awesomatix A800 MMX. The set consists of 93 pieces of high quality titanium screws, helping to reduce the overall weight of the car while also enabling the driver to play with the car’s weight balance if desired.

Source: SpeeDome-RC [facebook.com]

September 16, 2020

Rebellion RC Awesomatix MMX swing arm set

New for the Awesomatix MMX from Rebellion RC is their new swing arm set. Comprising of 8 pieces, 2 from each type, it offers a full range of swing arms, from the standard +8 and +9 offset points to the optional +8.5 and +9.5. The extra 0.5mm offset changes the car’s roll behaviour and handling feeling and on high grip tracks can be the difference between success and rolling over. Each arm is 3mm thick and features the offset engraved on its surface for easy identification.

View the complete set here

September 15, 2020

RC Maker 3D Pro direct mount fan shroud

RC Maker have introduced their new ultimate fan shroud and fan mount in one. Available in 3 versions for the Awesomatix A800MMX, Xray T4’20 or Yokomo BD10, it mounts directly to the motor-mount using the supplied super light aluminium mounting screws, with no fan mount or tape required. The new shroud increases the volume of air flow over the motor, reducing motor temperatures and how it is mounted, floating off the chassis, there is no interference with the chassis’ flex.

View the mounted shroud here

September 15, 2020

Protoform P47-N body now available in X-Lite

Protoform have announced a small update to their World Championship winning P47-N 200mm line of body shells. On high-grip racing surfaces, the weight of 200mm touring car bodies is more crucial than ever and so the P47-N is now available in X-Lite weight to help lower the CG of your car. This results in better, more responsive handling, less traction roll and faster lap times.

Source: Protoform [racepf.com]