Red RC » P On Road

December 12, 2019

Shepherd V8.2 hard suspension plastics set

Hot on the heels of their new hard suspension plastics set for the Velox V10, Shepherd now also release a kit for their popular Velox V8.2 1/8th scale on-road car. The new hard plastic part set includes all wishbones, uprights and body mounts in a harder variant. The high-quality composite material is characterised by an increased percentage of fibre glass in comparison to the standard wishbones, improving car handling on high-grip tracks or when used in high ambient temperatures. The set is available from now on.

Source: Shepherd [team-shepherd.com]

December 12, 2019

Kawada M300FX4S 1/12th scale pan car kit

Kawada have announced the release of their new M300FX4S 1/12th scale pan car kit with 2mm aluminium main chassis. Developed for racing in high to very high bite conditions the aluminium chassis will help to settle down the car’s reaction, making for improved car control and quicker lap times. Also included are an aluminium rear lower pod plate, a separate front bumper mount, floating servo mount, the #RSF18 carbon fibre rear axle shaft that allows diff or locked diff functions, the differential lock set, a large urethane front bumper as well as a purple centre shock spring. The kit will hot stores very soon.

View more images here

December 12, 2019

Yeah Racing YD2 aluminium rear motor kit

Made for Yokomo’s YD2 series of RWD drift cars is Yeah Racing’s new aluminium rear motor kit. The set relocates the motor of the YD2 to a rearward position which helps to gain on-power grip and corner entry speed. The motor position is adjustable so drivers can fine-tune the amount of chassis roll when entering a corner. The leftover space is filled by an aluminium chassis stiffener brace which also acts as a location to attach the speed controller to. Also brought over from Yeah Racing’s previous bulkhead design is the quick release diff to easily swap between diffs to try different setups. Included in the kit are the gearbox halves, motor plate, chassis stiffener and chassis mount, all machined from aluminium and coming black anodised and laser-engraved for surface protection and looks.

View more images here

December 11, 2019

MD Racing Mini-10 M-class touring car kit

Coming soon from MD Racing is the Mini-10 M-class touring car kit. The car utilises a carbon fibre main chassis with a dual vertical top deck design, a mid layshaft layout and highly adjustable suspension components with a multi caster and camber system front end, reactive toe rear suspension and the adjustable 225mm or 235mm wheelbase. As for the drivetrain, the car can be run in a 4WD, FWD or setup that also has influence on the available motor and battery positions with the all-wheel and RWD car using a side mounted battery while the FWD car can make use of a transversally mounted battery pack. Full details will become available in time of the release.

View more images here

December 11, 2019

Mon-Tech Racing 308TCR FWD touring car body shell

Mon-Tech Racing from Italy have introduced their all-new 308TCR body shell for 1/10th scale FWD touring cars. The ETS-approved body shell is modelled after a popular French compact car and it sports a large front splitter for high corner speeds, sculptured fenders for looks and downforce as well as a wide rear wing for optimised overall balance. Included with the Italian-made body shell, that is moulded from lightweight 0.75mm high-quality polycarbonate, come window masks as well as a large decal sheet with grille and light details as well as the graphic elements visible in the images above and below.

View more images here

December 11, 2019

Xray T4’20 1.6mm carbon fibre upper deck

Coming from Xray and made for their all-new T4 2020 mid-motor touring car kit is a 1.6mm carbon fibre upper deck. Thinner than the kit top deck the 1.6mm variant is best used in combination with the aluminium flex or solid chassis as it allows for a softer overall chassis setting compared to the 2.0mm part which helps especially in lower grip conditions where a softer setting can improve steering and rear side bite. Like the original top deck the thinner variant is fully symmetrical and usable with the rear ball bearing or bushing chassis stiffeners to further fine-tune the overall chassis flex.

Source: Xray [teamxray.com]

December 11, 2019

RC-Square Parsec pan car alloy side spring retainers

RC-Square have introduced new aluminium side spring retainers for the Parsec pan cars. Machined from aluminium and sporting a black surface coating for wear, the spring retainers offer greater precision, they hole the side springs more secure and also allow for easier adjustment. The retainers come as pairs and include suitable mounting grub screws.

View another image here

December 11, 2019

Xtreme Racing T4’20 carbon fibre front bumper holder

Xtreme Racing have introduced their new carbon fibre front bumper holder with brace for the Xray T4’20 touring car. Machined from high-quality 2.0mm carbon fibre, the upper bumper plate was designed to contact the front bulkhead to prevent the chassis from breaking during impacts. The bumper holder was designed to use the stock body mounts and does not work with the offset body posts.

Source: Xtreme Racing [xtremercracing.com]