December 30, 2019

RC Maker T4’20 floating electronics weight plate

RC Maker have introduced their new floating electronics weight plate for the Xray T4 2020 touring car. The plate puts weight where it is needed most, to get the car up to he minimum weight and balanced. The set includes a carbon shim which floats it 0.5mm off the chassis from near to the centre of the car, meaning the plate itself has minimal to no impact on the flex of the chassis. On top of the plate, there is a 10g of brass weight to secure it in place. The plate attaches to the often unused antenna mount hole. If drivers still want to use this antenna mount, they can use an extra long screw through the lower weight, and thread the antenna mount on-top. The plate itself is 1mm thick and weighs in at 12g. The set coming in at 22g is a brilliant way to meet the limit, balance the car and have no impact on the flex characteristics of the chassis at the same time. Another added bonus, is owners can change chassis or clean the car, and simply remove the receiver, transponder and fan simply by undoing one screw. If drivers are after more weight for the car, RC Maker have a 1.5mm option plate available weighing in at 20g which can either replace the 1mm plate to bring the overall weight up to 30g, or added to the 1mm plate to make a total of 2.5mm, bringing it all the way up to 42g. The set comes packaged in a high quality black magnetic lid box with RC Maker logo on a clear front window, ensuring the plate is kept in perfect condition in transit.

View more images here


December 30, 2019

T-Works T4’20 hard-coated alloy ball end set

T-Works have announced the release of a new hard-coated aluminium ball end set for the Xray T4 2020 touring car. Machined from aircraft-grade 7075-T6 aluminium for a low weight and high strength, the ball ends also feature a hard surface coating for low wear and smooth ball cup movement. The 18-piece set is a direct replacement for the standard steel parts.

Source: T-Works [rc-tworks.com]


December 28, 2019

RCON RConcept 225mm M-class body shell

Coming from RCON is their new RConcept 225mm wheelbase M-class supercar body shell. Offering a low centre of gravity and high downforce design, the 170mm wide body is moulded from lightweight 0.8mm polycarbonate. Included come window masks, a decal sheet as well as a separate rear wing with mounting hardware.

View another image here


December 27, 2019

H2 Racing Development TRF420 mid motor conversion

Coming soon from H2 Racing Development is a mid motor conversion kit for the Tamiya TRF420 touring car. The conversion features a true mid motor design with longer rear and a shorter front belt which ensures quick acceleration and a more responsive handling. The set includes a 2.5mm main chassis and 2.0mm upper deck, both machined from Japanese Torayca T300 pure carbon fibre as well as Japanese MBL belts. The conversion utilises the standard TRF20 motor mount and it will become available by mid-January 2020.

View more images here


December 27, 2019

Awesomatix roll out new optionals

Awesomatix have announced the release of new option parts for their line of touring cars. First up is the HRB horizontal rear bodypost set that was developed to lower the overall centre of gravity. The set mimics the design found on the A800FX FWD touring car and improves the handling and corner speed of the 4WD A800 kits which leads to faster lap times. Furthermore the body shell will become more stiff in the rear end section and thus has less deflection at high speeds. The HRB set fits all A800 models besides the A800FX.

Continue reading here


December 27, 2019

SpeeDome-RC T4 2020 carbon fibre bumper brace

Coming from SpeeDome-RC is a carbon fibre bumper brace for the Xray T4 2020 touring car. Machined from 4mm high-quality material the bumper brace will protect the front of the chassis in the event of a crash as the part will brace itself against the front bulkheads, ensuring only minimal movement of the lower front bumper mount and thus taking away stress from the very front of the chassis. The CNC-machined bumper brace includes two M3x10mm titanium screws and it is a direct fit.

Source: SpeeDome-RC [facebook.com]


December 27, 2019

T-Works roll out new X3 GTS optionals

T-Works have announced the release of new optional parts for the Hong Nor X3 GTS kit. First up is a titanium turnbuckle set made of high-quality 64 grade titanium. Included are six camber and steering link turnbuckles as well as a steering servo link and two wrenches that allow for easy building and adjustment. Using the titanium links over the standard parts will lower the overall wight while adding rigidity and visual impact. Also new is a precision ball bearing set that includes ball races with rubber and metal-shields for high durability while still ensuring low natural drivetrain drag. Last but not least comes a 158-piece 64 grade UFO head titanium screw kit and a 170-piece gold-colour steel screw set. The titanium fasteners allow to scrub some weight and add rigidity while the steel screw set mainly adds visual impact and corrosion resistance.

View the other parts here


December 26, 2019

Yeah Racing 4-Tec 2.0 alloy spur gear adapter

Coming from Yeah Racing and made for the Traxxas 4-Tec 2.0 is an aluminium spur gear adapter. A direct replacement for the standard steel part, the aluminium option part is a lot lighter, resulting in less rotational masses and thus quicker spool-up, better acceleration and more overall performance. The set includes the CNC machined adapter, a suitable spur gear, washers and mounting hardware and it is available in blue or black colour.

View the black spur gear adapter here