Coming from Yeah Racing and made for the Tamiya SW-01 truck is a graphite upper arm connector set. The braces connect the front and rear upper arms of Tamiya’s popular stand chassis and installation is simply with only a screw for each upper arm. The connectors are machined from lightweight carbon fibre material and they include the needed mounting hardware.
WellRC have introduced two new WellCut products that help to make preparing on-road body shells a lot easier. First up is the WellCut for 1/8th scale body shells, a system that helps to locate the body posts when prepping already painted body shells. Place the WellCuts over the front body posts with the magnets facing the rear of the car and secure them with two body clips. After using the WellCut template to cut out the rear of the car, set the body on the car and drop the front two outer magnets into place. The super strong magnets will immediately centre themselves. Use a fine tip black permanent marker to mark the centres of the magnets. Remove the body and cut the two holes with a body reamer and you’re set. Available in two sizes to fit 7 and 8mm diameter front posts.
Xray’s all-new T4 2020 electric touring car kit hit stores this week and since the 2020 variant of the IFMAR World Championship winning T4 platform is a whole new design, Xray have stitched together an informative video featuring IFMAR World Champions Bruno Coelho and Alexander Hagberg who dig deep to explain the car’s main features.
Source: Xray [teamxray.com]
Coming from Marc Rheinard’s MR33 brand are several new under battery weights that help to fine-tune the weight balance of 1/10th touring and off-road cars. The range includes a 28g 0.6mm weight for standard-length LiPos, a 20g 0.6mm shorty weight, as well as 50g 1.0mm, 75g 1.5mm and 100g 2.0mm weights for Yokomo’s YZ-2 range of off-road buggies. The latter three are available separately or in a convenient 3-piece set. Using the weights will help to optimise the chassis weight balance when using lightweight or low-profile batteries or when added weight is beneficial, such as running in high-bite or very bumpy track conditions. All weights are of a dark colour and they come laser-engraved for easy identification.
Yeah Racing have introduced their new 5-spoke rims for M-class touring cars such as the ones of Tamiya and Xpress. Of a realistic design the rims are moulded using a hard plastic compound which helps to extract more performance and grip from a tyre. The rims are usable with most M-class rubber tyres, they fit all M-class touring cars with 12mm hex wheel adapters and are available as 4-piece packs in black or white colour.
Coming soon from Sweep are their new EXP-24S touring car rubber tyres for the use in low “winter” temperatures. Making use of the EXP-R2 carcass, the new 24S compound excels especially in low ambient and track temperatures and despite being on the very soft side, it provides consistent performance without a drop in performance toward the end of a run. The tyres come in sets of four, premounted on white dish wheels and including inserts.
Source: Sweep [sweepracing.com]
Yeah Racing have introduced their new chassis brace mount for the Tamiya M08 M-chassis kit. Machined from aluminium the tubes will reinforce the chassis assembly, allowing to extract more performance from the tyres and car. The braces come as pair and are available in blue or black anodising.
View the black colour option here
RC Maker have introduced their new GeoCarbon wing mounting solution for touring cars. Developed for serious racers, it is designed to protect the wing, and wing strut in crashes, as well as provide maximum downforce and efficiency from the wing. The “L” shaped design can be switched to left and right to fit different bodies and wing positions, and offers rearward and outer wing chord support. Flexing of the wing in high speed straights and corners can lead to unpredictable handling. This is due to the wing folding back, but also, when the wing folds back the sides of the wing lift up to even further increase the detrimental impact. Our side facing supports minimise this lifting, which also in turn minimises flexing of the wing backwards. This creates an overall more stable wing in every direction! Also included is an adjustable carbon fibre support for under the bodyshell. This clamps the wing and body between two pieces of carbon, providing more support and stiffness. It can be shifted forward or backwards to suit different bodies and wing positions. The set is complete with two lightweight alloy screws and two lightweight alloy nuts to provide a lightweight, stable solution to mounting the wing.
