Red RC » P On Road

October 24, 2019

Spektrum DX5 Rugged DSMR transmitter orange

Horizon Hobby have introduced the new Spektrum DX5 Rugged DSMR transmitter in a special orange edition. The 5-channel surface transmitter redefines radio control with a level of durability to match the tough conditions off-roaders, bashers and boaters encounter constantly. The designers started with a chassis based on the Spektrum ergonomic design found on the popular DX5C and competition favourite DX5 Pro. From there, they integrated cordless power tool feature ideas for the die-hard punishment those products endure. The result is an RC system with exceptional durability in addition to other innovative features that unite with a level of precision, versatility and convenience.

Continue reading here

October 24, 2019

BR1 BC-T4WC Xray T4-series steering servo

Coming from Bruno Coelho’s BR1 brand is the new BC-T4WC servo for Xray’s T4 series of touring cars. Following the success of the BC-1863X servo, and to celebrate its Touring Car World Championship title, BR1 have developed the BC-T4WC (0.07s/11.0kg-cm/56g), a servo which is a must have for Xray T4 users that are looking for maximum performance from their car. It features a new all-aluminium case, as well as a receiver wire that now comes out of the back of the servo, allowing for much neater wiring. The integrated mount also has a screw hole to install a battery backstop with the low centre of gravity mount, which was characteristic for the first version of the servo, being once again the most striking feature, as it also perfectly fits the soon to be released Xray T4 2020 car. In addition the servo has also been updated internally to ensure best possible performance for the user.

View more images here

October 24, 2019

Sunpadow Phantom II Black Label LiPo packs

Sunpadow have announced the release of their new Phantom II Black Label competition LiPo battery range. Listening to the feedback of their factory drivers, the packs utilise a new technology and production process, making for improved performance while being more cost efficient for the customer at the same time. The range includes standard and shorty options with the standard size range coming as 8800mAh (25.1mm/308g), 6600mAh (23.1mm/312g), 6300mAh (23.1mm/288g), 6000mAh (23.1mm/295g), and 5600mAh (23.1mm/277g) variants. The shorty batteries are available as 2S 5100mAh (25.1mm/215g), 4500mAh (25.1mm/214g) and 4000mAh (18.5mm/157g) options and also as 8000mAh (18.5mm/155g) 1S 1/12th scale battery. All feature black hardcases with black labels and they come in zipped storage containers.

Source: Sunpadow [sunpadow.com]

October 24, 2019

MST FXX 2.0 KMW drift car kit

MST have introduced their new FXX 2.0 KMW limited edition drift car kit. The shaft-driven 4WD chassis utilises a 3.5mm carbon fibre chassis and vertical top deck design and it boasts a multitude of red anodised aluminium optionals to make it stand out. Features include a newly designed motor mount with integrated arm mounts, a redesigned steering assembly allows for maximised steering angles and the car comes with an aluminium alloy ATK front-wheel seat. The exclusive adjustable design features three-stage tow distance and four different Ackermann lock points, allowing for massive front wheel steering throw while offering more Ackermann angle settings. In rear the chassis is equipped with an aluminium alloy MB rear suspension system with reactive toe adjustment. Offering a wide range of adjustments the rear side bite can be fine-tuned to adjust the slip angle to the driver’s liking. The kit is rounded out by a newly designed aluminium alloy deceleration system with a wide range of gear ratio adjustments and it comes including an aluminium nameplate of a limited serial number to highlight the kit’s uniqueness.

View more images here

October 24, 2019

IGT8 dynamic anti-dive support

IGT8 have introduced the new dynamic anti-dive support set for their line of 1/8th GT cars. The kit eliminates the front body roll when the front suspension is under compression by keeping the body levelled, avoiding unwanted tyre marks on the front fenders and thus increasing the steering. The set includes two machined carbon fibre levers that are attached to the front C-hubs with the red anodised alloy posts and ball bearings supporting the body shell. Also included is all needed hardware.

Source: IGT8 [IGT8.com]

October 24, 2019

Xtreme Racing introduce more Arrma carbon optionals

Coming from Xtreme Racing are some more carbon fibre optionals for the popular Arrma Limitless and and Infraction high-speed on-road bashing vehicles. First up are Limitless specific carbon fibre wing mount and wing end plates. The wing mount plates are machined from 2.5mm carbon material and they were designed to replace the standard plastic wing mount. Using the parts will provide a stronger support over the stock parts, resulting in improved downforce. The set includes two wing mount plates.

Continue reading here

October 24, 2019

SMJ Teflon battery tape

SMJ have introduced their new Teflon battery tape that will greatly lower the friction between the battery compartment surface and the battery case. Only 0.15mm thin the tape has a very low friction coefficient while not disturbing a low centre of gravity, ensuring the battery has way less influence in chassis tweak during cornering, ensuring more equal left-to-right chassis flex. The tape also offers protection to the chassis and battery case making both parts look fresh for a long time. SMJ recommend to place the tape on the lower side of the battery case instead of the main plate when running the latest breed of highly machined flex aluminium chassis.

Source: SMJ [smj-rc.com]

October 23, 2019

Trion TricoRoll V2 JMRCA 13.5T & 17.5T motors

Trion have introduced their new TricoRoll V2 JMRCA 13.5T and 17.5T brushless stock motors that come standard with 14mm titanium rotors. The two electric brushless motors offer very high torque values, making them ideal for racing on high-grip carpet and dirt tracks as well as in non-boost touring classes. Highly machined aluminium cans ensure low operation temperatures while adding to the overall looks.

Source: Trion [team-trion.jp]