Red RC » P On Road

June 26, 2024

RC Atomic BZ5 1:28 Belt Drive 4WD Competition Chassis

Specialist 1:28 manufacturer RC Atomic has released its long awaited new BZ5 1:28 Belt Drive 4WD Competition Chassis. Always aiming to provide racers with top level competition chassis they have been working hard following the BZ3 release in 2019. After years of experience with that car and listening to racers opinion around the world they have now fully re-designed their winning belt drive 4WD chassis and introduced the new BZ5 which gets all new bulkheads and motor mount, longer front Arms and new knuckles which give increased stability as well as more mid corner steering.

View full list of new features and more images here

June 25, 2024

T-Work’s Multi-function Bag w/Hardware Storage Boxes

New from T-Works is this Multi-function Bag complete with 10 Hardware Storage Boxes. The bag features double protection with Oxford cloth and waterproof lamination ensuring that tools and parts are properly protected in all environments. Built-in zipper pocket with removable compartment design you can adjust freely the layout according to your needs. Measuring 17.7×10.2×2.6cm, the transparent 15 compartment Hardware Storage Boxes allow you to quickly identify and access your parts providing you with a neat and organised parts management solution. On removal of storage boxes you have the option to adjust bag compartment space for tool and accessory storage.

View more images here

June 25, 2024

Sweep WORK Emotion wheels

Sweep Racing has released a new 1:10 spoke wheel that is officially licensed by famous Japanese car wheel manufacturer WORK. The new WORK Emotion wheels have zero offset as current dish wheels and are made of strong material for FWD or 1:10 Touring Car racing use. The wheels are available in white and black colour options.

View additional image here

June 24, 2024

Ielasi Tuned GP9R24 .21 Onroad Engine

Ielasi Tuned concludes it 2024 engine releases with the new GP9R24 .21 Onroad engine. Compared to their previous flagship GP9R23WC engine the the new GP9R24 engine get an exclusive Ielasi Tuned piston which allows the Italian engine tuners to have a tighter piston/cylinder coupling than the WC allows it to maintain better compression even when hot. The GP9R24 will be released with the new “R” reinforced connecting rod, crank with different timing and balancing to attenuate internal vibrations, new engine backplate and inner head with revised configuration and cooling head with the new 2024 graphics.

View piston comparisons here

June 24, 2024

MonTech 1:10 Touring Car Wing Combo

Following new wing trends, Italian bodyshell producer Mon-tech Racing has released this new wing combo for 1:10 Touring Car. Made using 0.75mm polycarbonate, both are new wings designs with one giving high load and one designed for medium load. While light at the same time they are rigid wings to be as efficient as possible giving you smoothness and stability. Coming complete with fixings the kit includes screws and black plastic washers.

View wings cut & mounted here

June 24, 2024

MAD Wurks Mi9 Top Deck Options

US based parts producer MAD Wurks has released a range of new top deck options for the recently released Schumacher Mi9 Electric Touring Car. In testing they identified benefits from additional top deck flex options to address varying grip levels and conditions on both asphalt and carpet race surfaces. As a result they have produced 1.5mm and 2mm options in both narrow and wide top decks to help fill the tuning gaps.

View more images here

June 24, 2024

Yokomo MS1.0 Caster Measurement Tool and Springs

Yokomo has two new options for its flagship MS1.0 1:10 Electric Touring Car in the form of a new caster measurement tool and new springs. The new caster measurement tool is attached to the steering block on the MS1.0 to facilitate caster measurement when measuring alignment when the new turnbuckle tuning part is in use. The tool allows you to check and adjust caster accurately. The new springs are softer than the MS1.0 standard springs. Available in 1.8 and 1.85, they are effective for outdoor asphalt surfaces where you want more traction with a combination of 1.80 in the front and 1.85 in the rear recommended.

View more images here

June 21, 2024

Blitz EK9-MK2 1:10 FWD Bodyshell

Blitz has updated its EK9 1:10th Bodyshell for FWD class with the release of the EK9-MK2. The original EK9 was developed in 2019 because the EFRA GBS body rules for FWD class applied but now they have fine-tuned it and made the EK9-MK2. The development of EK9- Mk2 bodyshell is based on the middle motor Front wheel driver chassis, the roof height of the Mk2 is low down 10mm, with the low profile design improving the airflow and increasing downforce, compared with EK9 the new Mk2 body can carry more corner speed, less traction roll, and much more stability. The EK9-Mk2 body included a light decal and window mask, the pre-mark body tower mounting location dots help the user easily find the right location to mount the body. 2 different thicknesses of EK9-Mk2 Bodyshell available, 0.7mm Standard and 0.5mm Light.

View more images here