Red RC » P On Road

April 26, 2019

O.S. Speed R21GT 1/8th nitro GT engine

O.S. Engines have announced the soon release of their new O.S. Speed R21GT engine for the growing 1/8th GT on-road classes. Designed with the forthcoming 1/8th GT IFMAR World Championship in mind, the engine builds on the proven R2101 crankcase which was refined as was the 5+3 ports liner and piston to meet current IFMAR rules. The newly designed crankcase features a DLC coating for wear while the updated cooling head design ensures optimised heat dissipation under the large GT body shells. The engine is rounded out by the newly designed 22E (B) GT carburettor and it comes with a 7mm venturi insert, again to meet IFMAR requirements. The engine will become available separately or including the T-2060SC + MB01-70 (M2003SC) exhaust system.

View another image here

April 25, 2019

Speedzone 7.4V 4000mAh oval diameter LiPo pack

Speedzone have introduced their new oval diameter 7.4V 4000mAh hardcase LiPo battery pack. Ideal for a range of applications including ready-to-run vehicles, certain Tamiya kits or starter boxes, the hardcase “racing pack”-style battery is made of high-quality 50C LiPo cells and it offers a high capacity for long operation times. The pack comes pre-wired with an industry-standard balancer power and a T-type power plug.

Source: Speedzone USA [speedzoneusa.com]

April 25, 2019

Kyosho Mini-Z inner tube roll shock set

Kyosho have introduced an inner tube roll shock set for Mini-Z vehicles using the MZW309 aluminium motor mount. This inner tube shock can control the damping of roll movement independently from the pitching movement and the damping effect can be adjusted by changing the viscosity of the grease applied. The set includes a carbon fibre damper plate, composite roll dampers and precision machined hardware.

Source: Kyosho [kyosho.com]

April 25, 2019

Pro-Line Pomona Drag Spec wheels

Designed for the growing class of SC drag racing rigs are Pro-Line Racing’s new Pomona Drag Spec front and rear wheels. The Pomona wheels were specifically made for no-prep Drag racing and are a perfect fit with Pro-Line’s Hoosier Drag 2.2” front tyres. The Pomona wheels are strong and lightweight 12mm hex wheels making them the ideal choice for performance drag racing. The wheel spoke design mimics the wheels of full-size dragsters and will complete the look of the build. The Pomona wheel offset is ideal for Traxxas 2WD Slash trucks converted to no-prep Drag Racing cars, which has exploded in popularity. The wheels are available as 2.2” front and 2.2”/3.0” rear wheels, ideal for Pro-Line’s Hoosier drag tyres.

View more images here

April 24, 2019

Infinity IF18 titanium & aluminium screw sets

Infinity has released both titanium and aluminium screw sets for their IF18 to reduce the weight of its World Championship winning chassis. In the titanium range, the screw sets are offered to cover both the upper and lower sections of the car. The 111 piece Upper set saves 18g compared with the standard kit steel screws while the 47 piece Lower set brings a weight saving of 12 grams. Use of the titanium screws will slightly increase chassis flexibility allowing fine tuning of the car setup for any conditions. In aluminium, two upper sets are offered. Available in black or red colours, the 111 screws will save over 30 grams and offer a mild driving characteristic by increasing chassis flex in a well balanced manner.

View the screw sets here

April 24, 2019

Hudy carbon fibre touring car wing side plates

Coming from Hudy are two sets of carbon fibre side plates for 190mm and 200mm touring car rear wings. Machined from 0.5mm thin premium carbon fibre the side plates add cool looks and they are machined to match EFRA and IFMAR size regulations. However, prior to using the plates, please check with your track’s or series’ regulations as some rules deny the use of carbon fibre body optionals.

View more images here

April 24, 2019

Yeah Racing FF03 & XV01 carbon bumper support

Coming from Yeah Racing is a carbon fibre bumper support for the Tamiya FF03 and XV01 kits. Machined from high-quality carbon fibre the support plates offer improved structural integrity of the bumper for added chassis and motor protection. The set includes two plates that are a direct fit with the above kits.

Source: Yeah Racing [yeahracing.com]

April 24, 2019

Xray XB8 graphite PB steering block & rear upright LB

Xray have introduced new graphite composite PB steering blocks and rear uprights for the XB8’19 buggy. The lightweight yet strong parts utilise a new graphite composite material that ensures free suspension movement in dusty conditions while also offering increased stability and corner speed on high to very high bite tracks. Both parts are designed for the use with larger 8x16x5mm outer ball bearings for increased reliability and life-span with the front pivot ball steering block being usable for the XB8’19 while the rear upright also fits the GTX8 and GTXE. The parts are non-directional meaning hey are usable both on the left and right hand side of the car and they are available separately.

View the rear upright here